Dry Grinding of Titanium Alloy Using Brazed Monolayer cBN Wheels Coated with Graphite Lubricant

被引：8

作者：

陈燕 ^{[1
]}

丁兰英 ^{[1
,2
]}

傅玉灿 ^{[1
]}

苏宏华 ^{[1
]}

吴杰 ^{[1
]}

徐九华 ^{[1
]}

徐鸿钧 ^{[1
]}

机构：

[1] College of Mechanical and Electrical Engineering,Nanjing University of Aeronautics and Astronautics

[2] College of Engineering,Nanjing Agricultural University

来源：

TransactionsofNanjingUniversityofAeronauticsandAstronautics | 2014年 / 31卷 / 01期

关键词：

grinding; graphite lubricant; Ti-6Al-4V; grinding temperature; grinding force ratio;

D O I：

10.16356/j.1005-1120.2014.01.008

中图分类号：

TG580.6 [磨削加工工艺];

学科分类号：

摘要：

The purpose of this study is to investigate the effect of graphite lubricant on the dry grinding performance of Ti-6Al-4Valloy,using graphite-coated,brazed monolayer,cubic boron nitride(cBN)wheels.Brazed monolayer cBN wheels both with and without a coating of polymer-based graphite lubricant are fabricated and subsequently compared for grinding performance based on measurements of grinding temperature,surface microstructure and grinding.In terms of grinding temperature,considerable improvement in dry grinding performance of titanium alloy is achieved using coated brazed monolayer cBN wheels,with 42%—47%reduction in grinding temperature as opposed to uncoated wheels.The grinding force ratio with the coated wheels is observed to remain between 1.45to1.85despite material removal rates reaching up to 1 950mm3/mm.No tangible change in ground titanium surface microstructure is noted as a result of grinding with the graphite coated wheels as opposed to the uncoated ones.

引用

页码：104 / 110

页数：7

共 50 条

[41] Joining interface and grain fracture of single-layer brazed grinding wheels with binderless CBN grains
Ding, W. F.
Miao, Q.
Xu, J. H.
Ma, C. Y.
Zhao, B.
Yang, C. Y.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2013, 68 (5-8): : 1261 - 1266
[42] Self-sharpening ability of monolayer brazed polycrystalline CBN grinding wheel during high-speed grinding
Zhu, Yejun
Ding, Wenfeng
Rao, Zhiwen
Zhao, Zhengcai
CERAMICS INTERNATIONAL, 2019, 45 (18) : 24078 - 24089
[43] High efficiency deep grinding of a low alloy steel with plated CBN wheels
Stephenson, DJ
Jin, T
Corbett, J
CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2002, 51 (01) : 241 - 244
[44] Preparation and Characterization of Self-Lubrication CBN Grinding Wheel Containing Graphite as Lubricant
Ding, W. F.
Xu, J. H.
Huang, J. L.
Chen, Z. Z.
Su, H. H.
Fu, Y. C.
ADVANCES IN ABRASIVE TECHNOLOGY XIV, 2011, 325 : 85 - +
[45] An investigation on surface grinding using graphite as lubricant
Shaji, S
Radhakrishnan, V
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2002, 42 (06): : 733 - 740
[46] Grinding fluid performance & characterization of wheel wear in grinding using electroplated CBN wheels
Caglar, Muge
Evans, Robert
Gift Jr., Frank C.
Force II, Edwin W.
Misiolek, Wojciech Z.
Grinding and Abrasives, 2002, (JUNE/JULY): : 8 - 14
[47] Grinding Capability of the Indigenous Polymer-Based Solid Lubricant Coating Wheels Used in Dry Grinding
Ding, L. Y.
Su, H. H.
Xu, H. J.
Fan, M.
ADVANCES IN MATERIALS MANUFACTURING SCIENCE AND TECHNOLOGY XIV, 2012, 697-698 : 80 - 83
[48] Preparation mechanism and grinding performance of single-layer self-lubrication brazed CBN abrasive wheels
Ding, W. F.
Miao, Q.
Xu, J. H.
Chen, Z. Z.
Yang, C. Y.
Fu, Y. C.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2013, 68 (1-4): : 249 - 255
[49] Preparation mechanism and grinding performance of single-layer self-lubrication brazed CBN abrasive wheels
W. F. Ding
Q. Miao
J. H. Xu
Z. Z. Chen
C. Y. Yang
Y. C. Fu
The International Journal of Advanced Manufacturing Technology, 2013, 68 : 249 - 255
[50] High removal rate grinding of transmission components using CBN wheels
Varghese, B.
Kumar, K. V.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2007, 221 (08) : 1353 - 1357

← 1 2 3 4 5 →