Geometric calibration for a SPECT system dedicated to breast imaging

被引:0
|
作者
武丽伟 [1 ,2 ]
曹学香 [1 ,3 ]
王璐 [1 ,2 ]
黄先超 [1 ]
柴培 [1 ]
贠明凯 [1 ]
张玉包 [3 ]
张龙 [3 ]
单保慈 [1 ]
魏龙 [1 ,3 ]
机构
[1] Key Laboratory of Nuclear Analysis Techniques, Institute of High Energy Physics, Chinese Academy of Sciences
[2] Graduate University of Chinese Academy of Sciences
[3] Beijing Engineering Research Center of Radiographic Techniques and Equipment
基金
中国国家自然科学基金;
关键词
D O I
暂无
中图分类号
R816.4 [胸部及呼吸系]; TP391.41 [];
学科分类号
080203 ; 1001 ; 100105 ; 100207 ; 100602 ;
摘要
Geometric calibration is critical to the accurate SPECT reconstruction. In this paper, a geometric calibration method was developed for a dedicated breast SPECT system with a tilted parallel beam (TPB) orbit. The acquisition geometry of the breast SPECT was firstly characterized. And then its projection model was established based on the acquisition geometry. Finally, the calibration results were obtained using a nonlinear optimization method that fitted the measured projections to the model. Monte Carlo data of the breast SPECT were used to verify the calibration method. Simulation results showed that the geometric parameters with reasonable accuracy could be obtained by the proposed method.
引用
收藏
页码:1019 / 1024
页数:6
相关论文
共 50 条
  • [31] Quantification of radiotracer uptake with a dedicated breast PET imaging system
    Raylman, Raymond R.
    Smith, Mark F.
    Kinahan, Paul E.
    Majewski, Stan
    MEDICAL PHYSICS, 2008, 35 (11) : 4989 - 4997
  • [32] A Dedicated Breast PET-CT System for Metabolic Imaging of Breast Tumors
    Magometschnigg, H.
    Pinker-Domenig, K.
    Bickel, H.
    Brueck, B.
    Mayerhoefer, M.
    Schernthaner, M.
    Helbich, T.
    EUROPEAN JOURNAL OF CANCER, 2012, 48 : S64 - S64
  • [33] Optimization of the acquisition parameters for a SPET system dedicated to breast imaging
    Lanconelli, Nico
    Campanini, Renato
    Iampieri, Emiro
    Pani, Roberto
    Cinti, Maria Nerina
    Bennati, Paolo
    Belcari, Nicola
    Camarda, Manuela
    Spontoni, Luigi
    Vecchio, Sara
    Randaccio, Paolo
    Russo, Paolo
    Del Guerra, Alberto
    2006 IEEE NUCLEAR SCIENCE SYMPOSIUM CONFERENCE RECORD, VOL 1-6, 2006, : 2959 - 2962
  • [34] Breast imaging with a dedicated PEM
    Ribeiro, R
    Abreu, C
    Almeida, P
    Balau, F
    Bordalo, P
    Ferreira, NC
    Fetal, S
    Fraga, F
    Lecoq, P
    Martins, M
    Matela, N
    Moura, R
    Ortigao, C
    Peralta, L
    Ramos, S
    Rato, P
    Rodrigues, P
    Santos, AI
    Trindade, A
    Varela, J
    NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION A-ACCELERATORS SPECTROMETERS DETECTORS AND ASSOCIATED EQUIPMENT, 2004, 527 (1-2): : 87 - 91
  • [35] Geometric Calibration for a Next-Generation Digital Breast Tomosynthesis System
    Ferris, William S.
    Vent, Trevor L.
    Maidment, Tristan D.
    Acciavatti, Raymond J.
    Wurtele, David E.
    Maidment, Andrew D. A.
    MEDICAL IMAGING 2017: PHYSICS OF MEDICAL IMAGING, 2017, 10132
  • [36] Post-launch geometric calibration of linear array imaging system
    Zhou, GQ
    Baysal, O
    RAST 2003: RECENT ADVANCES IN SPACE TECHNOLOGIES, PROCEEDINGS, 2003, : 325 - 330
  • [37] Geometric Calibration of a Micro-CT System and Performance for Insect Imaging
    Hu, Zhanli
    Gui, Jianbao
    Zou, Jing
    Rong, Junyan
    Zhang, Qiyang
    Zheng, Hairong
    Xia, Dan
    IEEE TRANSACTIONS ON INFORMATION TECHNOLOGY IN BIOMEDICINE, 2011, 15 (04): : 655 - 660
  • [38] A Staggered Array of Pinhole Cameras for Dedicated Breast SPECT
    Tenney, Charles R.
    Egger, Adam B.
    McCurley, James W.
    Dhah, Harkiran K.
    2009 IEEE NUCLEAR SCIENCE SYMPOSIUM CONFERENCE RECORD, VOLS 1-5, 2009, : 3586 - 3588
  • [39] Whole breast quantification with dedicated SPECT-CT
    Perez, Kristy
    Culter, Spencer
    Madhav, Priti
    Tornai, Martin
    JOURNAL OF NUCLEAR MEDICINE, 2010, 51
  • [40] A geometric system model of finite aperture in small animal pinhole SPECT imaging
    Hsu, Ching-Han
    Huang, Po-Chia
    COMPUTERIZED MEDICAL IMAGING AND GRAPHICS, 2006, 30 (03) : 181 - 185