Measurement of wireless pressure sensors fabricated in high temperature co-fired ceramic MEMS technology

被引:0
|
作者
Ji-jun XIONG [1 ,2 ]
Shi-jun ZHENG [1 ,2 ]
Ying-ping HONG [1 ,2 ]
Jun LI [3 ]
Ying-lin WANG [3 ]
Wei WANG [1 ,2 ]
Qiu-lin TAN [1 ,2 ]
机构
[1] Key Laboratory of Instrumentation Science & Dynamic Measurement,North University of China
[2] The Second Research Institute of China Electronics Technology Group Corporation
[3] MOE Science and Technology on Electronic Test & Measurement Laboratory,North University of China
基金
中国国家自然科学基金;
关键词
High temperature co-fired ceramic(HTCC); Wireless; Micro-electro-mechanical systems(MEMS);
D O I
暂无
中图分类号
TP211.4 []; TP212 [发送器(变换器)、传感器];
学科分类号
080202 ; 0804 ; 080401 ; 080402 ;
摘要
High temperature co-fired ceramics(HTCCs) have wide applications with stable mechanical properties,but they have not yet been used to fabricate sensors.By introducing the wireless telemetric sensor system and ceramic structure embedding a pressure-deformable cavity,the designed sensors made from HTCC materials(zirconia and 96% alumina) are fabricated,and their capacities for the pressure measurement are tested using a wireless interrogation method.Using the fabricated sensor,a study is conducted to measure the atmospheric pressure in a sealed vessel.The experimental sensitivity of the device is 2 Hz/Pa of zirconia and 1.08 Hz/Pa of alumina below 0.5 MPa with a readout distance of 2.5 cm.The described sensor technology can be applied for monitoring of atmospheric pressure to evaluate important component parameters in harsh environments.
引用
收藏
页码:258 / 263
页数:6
相关论文
共 50 条
  • [31] Fabrication of a low temperature co-fired ceramic package using powder blasting technology
    Yves Lacrotte
    John P. Carr
    Robert W. Kay
    Marc P. Y. Desmulliez
    Microsystem Technologies, 2013, 19 : 791 - 799
  • [32] Cad modeling of square spiral inductors with low temperature co-fired ceramic technology
    Tang, Wanchun
    Cui, Qi
    Xu, Guang
    MICROWAVE AND OPTICAL TECHNOLOGY LETTERS, 2008, 50 (02) : 281 - 285
  • [33] Low temperature Co-fired Ceramic on Metal (LTCC-M) packaging technology
    Fathy, A.
    McGinty, F.
    Pendrick, V.
    Ayers, G.
    Geller, B.
    Narayan, Y.
    Thaler, B.
    Chen, H.D.
    Liberatore, M.J.
    IEEE Topical Meeting on Electrical Performance of Electronic Packaging, 2000, : 261 - 264
  • [34] Millinewton force sensor based on low temperature co-fired ceramic (LTCC) technology
    Birol, H
    Maeder, T
    Boers, M
    Jacq, C
    Corradini, G
    Ryser, P
    2005 PhD Research in Microelectronics and Electronics, Vols 1 and 2, Proceedings, 2005, : 343 - 346
  • [35] Low Temperature Co-fired Ceramic (LTTC) technology for ridge waveguide filters & multiplexers
    Zaki, KA
    2003 IEEE TOPICAL CONFERENCE ON WIRELESS COMMUNICATION TECHNOLOGY, 2003, : 177 - 177
  • [36] Characterization and performance prediction for integral resistors in low temperature co-fired ceramic technology
    Delaney, K
    Barrett, J
    Barton, J
    Doyle, R
    IEEE TRANSACTIONS ON ADVANCED PACKAGING, 1999, 22 (01): : 78 - 85
  • [37] Fabrication of a low temperature co-fired ceramic package using powder blasting technology
    Lacrotte, Yves
    Carr, John P.
    Kay, Robert W.
    Desmulliez, Marc P. Y.
    MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS, 2013, 19 (06): : 791 - 799
  • [38] Design of a Microstrip Patch Antenna Using Low Temperature Co-Fired Ceramic Technology
    Natashah, N. Mohd
    Muammar, M. I.
    Soh, P. J.
    Azremi, A. A. H.
    Norhawati, A.
    ICED: 2008 INTERNATIONAL CONFERENCE ON ELECTRONIC DESIGN, VOLS 1 AND 2, 2008, : 721 - +
  • [39] Characterization and performance prediction for integral capacitors in low temperature co-fired ceramic technology
    Delaney, K
    Barrett, J
    Barton, J
    Doyle, R
    IEEE TRANSACTIONS ON ADVANCED PACKAGING, 1999, 22 (01): : 68 - 77
  • [40] Sintering and thermomechanical behavior of a Low Temperature Co-fired Ceramic
    Heux, A.
    Antou, G.
    Pradeilles, N.
    Delhote, N.
    Karnfelt, C.
    Gallee, F.
    Maitre, A.
    CERAMICS INTERNATIONAL, 2018, 44 (18) : 22609 - 22615