Interface Microstructure of Al-Fe Tubes Joint by Magnetic Pulse Welding

被引：1

作者：

XU Zhi-dan ^{[1
]}

YU Hai-ping ^{[1
,2
]}

LI Chun-feng ^{[1
]}

HAN Yu-jie ^{[1
]}

机构：

[1] National Key Laboratory for Precision Hot Processing of Metals,Harbin Institute of Technology

[2] The Key Laboratory of Advanced Welding and Joining,Harbin Institute of Technology

来源：

Journal of Iron and Steel Research(International) | 2012年 / S1期

关键词：

magnetic pulse welding; dissimilar material; ultrafine grained microstructure;

D O I：

10.13228/j.boyuan.issn1006-706x.2012.s1.089

中图分类号：

TG457.14 [铝];

学科分类号：

080201 ; 080503 ;

摘要：

Magnetic Pulse Welding(MPW)is a very high speed process which produces solid-state welds.In this work,Welding interface microstructure of Al/Fe tubes by MPW and its influence factors were investigated.The equipment with a capacitor of 100μF was used under different voltages range from 8 kV to 15 kV.SEM and TEM observation were carried out to investigate microstructure of the welding interface.The results show that the dissimilar tubes(Al/Fe)could be welded with the optimum tapered angle of about 4 degree.The welding interface in Al/Fe joints exhibits a characteristic wavy morphology with wavelength of about 100μm.A new layer exists between base tubes consisting of Al and Fe elements.Ultrafme grained microstructure is founded near the welding interface.The results obtain in this work provide the fundamentals for the investigation of MPW mechanism of dissimilar tubes.

引用

页码：442 / 445

页数：4

共 50 条

[21] Mechanical properties and interface morphology of magnetic pulse-welded Al–Fe tubes with preset geometric features
Haiping Yu
Haiqing Dang
The International Journal of Advanced Manufacturing Technology, 2022, 123 : 2853 - 2868
[22] Fatigue fracture properties of magnetic pulse welded dissimilar Al-Fe lap joints
Geng, Huihui
Sun, Liqiang
Li, Guangyao
Cui, Junjia
Huang, Liang
Xu, Zhidan
INTERNATIONAL JOURNAL OF FATIGUE, 2019, 121 : 146 - 154
[23] Improving the quality of Al-Fe tube joints manufactured via magnetic pulse welding using an inclined-wall field shaper
Dang, Haiqing
Yu, Haiping
Journal of Manufacturing Processes, 2022, 73 : 78 - 89
[24] Improving the quality of Al-Fe tube joints manufactured via magnetic pulse welding using an inclined-wall field shaper
Dang, Haiqing
Yu, Haiping
JOURNAL OF MANUFACTURING PROCESSES, 2022, 73 : 78 - 89
[25] Influence of yttrium on the microstructure of hypereutectic Al-Fe alloys
Department of Material Engineering, Shenyang Institute of Aeronautical Engineering, Shenyang 110034, China
Zhuzao Jishu, 2006, 11 (1214-1216):
[26] Microstructure and properties of Al-Fe die casting alloy
Key Laboratory of Liquid Structure and Heredity of Materials, Shandong University, Jinan 250001, China
不详
Tezhong Zhuzao Ji Youse Hejin, 2007, 9 (698-701):
[27] DECANTED INTERFACE MORPHOLOGY OF DILUTE AL-FE ALLOYS
YUE, AS
JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS, 1967, S : 197 - &
[28] MAGNETIC PULSE WELDING OF TUBES FOR DOMESTIC REFRIGERATORS
KHRENOV, KK
AUTOMATIC WELDING USSR, 1970, 23 (08): : 71 - &
[29] Characterization of the Microstructure and Interfacial Morphology of Magnetic Pulse Welded Steel/Al Tubes
Hu, Tianhan
Li, Bolong
Wu, Tianhai
Pan, Hua
Ding, Kai
Gao, Yulai
MATERIALS, 2025, 18 (04)
[30] Experimental and Numerical Analyses of Wavy Interface Formation and Local Melting Phenomena at the Magnetic Pulse Welded Al/Fe Joint Interface
Li, Jiedi
Muraishi, Shinji
Kumai, Shinji
MATERIALS TRANSACTIONS, 2021, 62 (08) : 1184 - 1193

← 1 2 3 4 5 →