Effect of Zr addition on precipitates in K4169 superalloy

被引:0
|
作者
Li Yamin
机构
关键词
K4169; superalloy; precipitation; Zr; long time aging; heat treatment;
D O I
暂无
中图分类号
TG132.33 [];
学科分类号
080502 ;
摘要
In order to investigate the effect of Zr addition on the precipitations of K4169 superalloy,a manual electric arc furnace was used to prepare the superalloy with different Zr addition from 0.03wt.% to 0.07wt%.After standard heat treatment and long-time aging,the microstructures of the alloys were observed using XRD,SEM and TEM.The results show that Zr not only inhibits the precipitation of Laves phase at the grain boundary,but also significantly promotes the precipitation of earlobe-like γ’ and γ″ phases.After long time aging at 680℃ for 500 h,the γ″ phase grows up obviously and forms a γ’/γ’’ clad microstructure when the Zr addition is 0.03 wt.%.A large number of fine orbed γ’ particles precipitate in the grains and some γ″ phase transforms to disk-like δ phase when the Zr addition increases to 0.05wt.%.The nano-polycrystalline γ’ phase precipitates in the grains and there is a little δ phase when the Zr addition is 0.07wt.%.As the Zr addition increases,the amount of Laves phase at the grain boundary decreases at first,and then increases and forms flaky morphology.
引用
收藏
页码:6 / 10
页数:5
相关论文
共 50 条
  • [21] Effect of low-voltage pulsed magnetic field on solidified structure of superalloy K4169
    Xie, Xiaohua
    Zhou, Quan
    Xiao, Chengbo
    Tang, Xin
    APPLIED MATERIALS AND TECHNOLOGIES FOR MODERN MANUFACTURING, PTS 1-4, 2013, 423-426 : 725 - +
  • [22] Effect of magnetic-thermal coordinated control solidification on grains and porosities of a superalloy K4169
    Zhu, C.
    Zhang, K. L.
    Li, Y. J.
    Zheng, C.
    Feng, X. H.
    Yang, Y. S.
    MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, 2024, 55 (09) : 1291 - 1296
  • [23] Study of Casting Defect Repair and Fatigue Performance of K4169 Superalloy Casting
    K4169高温合金铸件铸造缺陷修复及疲劳性能研究
    Xie, Zhixiong (xzx@hbut.edu.cn), 1600, Cailiao Daobaoshe/ Materials Review (35): : 22115 - 22120
  • [24] Grain refinement of superalloys K3 and K4169 by the addition of refiners
    Xiong, Yuhua
    Yang, Aimin
    Guo, Yiping
    Liu, Wei
    Liu, Lin
    SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS, 2001, 2 (01) : 13 - 17
  • [25] Effects of mechanical vibration and pouring temperature on solidified structure of superalloy K4169
    Xie, Xiaohua
    Chen, Leping
    Xiao, Chengbo
    Tang, Xin
    MATERIALS, MECHANICAL AND MANUFACTURING ENGINEERING, 2014, 842 : 332 - +
  • [26] Microstructure evolution of the K4169 superalloy blade based on cellular automaton simulation
    Yan, X
    Zhao, ZL
    Yan, WD
    Liu, L
    ADVANCES IN NATURAL COMPUTATION, PT 3, PROCEEDINGS, 2005, 3612 : 980 - 983
  • [27] Effect of rectangle aspect ratio on grain refinement of superalloy K4169 under pulsed magnetic field
    Institute of Metal Research, Chinese Academy of Sciences, Shenyang
    110016, China
    Jinshu Xuebao, 7 (844-852):
  • [28] EFFECT OF RECTANGLE ASPECT RATIO ON GRAIN REFINEMENT OF SUPERALLOY K4169 UNDER PULSED MAGNETIC FIELD
    Teng Yuefei
    Li Yingju
    Feng Xiaohui
    Yang Yuansheng
    ACTA METALLURGICA SINICA, 2015, 51 (07) : 844 - 852
  • [29] Effect of the Mold Positive and Negative Rotation on the Microstructure and Room-Temperature Mechanical Properties of K4169 Superalloy
    Chen Cheng
    Yang Guangyu
    Jin Menghui
    Wang Qiang
    Tang Xin
    Cheng Huimin
    Jie Wanqi
    ACTA METALLURGICA SINICA, 2024, 60 (07) : 926 - 936
  • [30] Study on the cutting performance of ultrasonic-assisted turning for cast superalloy K4169
    Kang, Renke
    Chao, Shenghao
    Sun, Jiansong
    Luan, Jinchuan
    Dong, Zhigang
    Wang, Yidan
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2025, 137 (3-4): : 1089 - 1102