Inspection interval optimization for aircraft composite structures with dent and delamination damage

The optimization of inspection intervals for composite structures has been proposed, but only one damage type, dent damage, has been addressed so far. The present study focuses on the two main damage types of dent and delamination, and a model for optimizing the inspection interval of composite structures is proposed to minimize the total maintenance cost on the premise that the probability of structure failure will not exceed the acceptable level. In order to analyze the damage characteristics and the residual strength of the composite structure, the frequency, energy, size, and depth of the damage are studied,and the situation of missing detection during the inspection is considered. The structural residual strength and total maintenance cost are quantified corresponding to different inspection intervals. The proposed optimization method relieves the constraints in previous simulation methods, and is more consistent with the actual situation. Finally, the outer wing of aircraft is taken as an example, and with the historical cases and experimental data, the optimization method is verified. The optimal inspection interval is shorter than the actually implemented inspection interval, and the corresponding maintenance cost is reduced by 23.3%. The result shows the feasibility and effectiveness of the proposed optimization method.