An exPerimental study of effect of solder joint geometry on thermal cycle life in SMT

被引：1
|
作者：
王国忠
方鸿渊
王春青
钱乙余
机构：
来源：
China Welding | 1997年 / 01期
关键词：
SMT; solder joint geometry; thennal cycle life; solder fillet shape; stand offheight;
D O I：
暂无
中图分类号：
TG407 [焊接接头的力学性能及其强度计算];
学科分类号：
080201 ; 080503 ;
摘要：
The geometry of solder joint in SMT is one of the important factors which determine the solder joint reliability. In this study, a type of solder joint specimen has been designed and is subjected to thermal cycling to failure between -55℃ to +125℃ with a 36 ℃/min heating and cooling rate and 10 min temperature holding times. The solder joint geometry is castellated and controlled with different solder fillet shape and stand off height. A statistical analysis of the scattered thermal cycle lives of solder joints by two parameter Weibull’s probability density function has been carried out in this paper. The experimental results show that the more reliable solder.joint geometry has flat or slight convex solder fillet with a stand off height larger than 0.1 mm. The results may be the recommended guideline to design optimal solder joint geometry.
引用
收藏
页码：70 / 76
页数：7
相关论文
共 50 条
  • [31] Effect of Thermal Shock Profile on solder joint of WLCSP
    Hong, RongHua
    Wang, Jun
    2011 12TH INTERNATIONAL CONFERENCE ON ELECTRONIC PACKAGING TECHNOLOGY AND HIGH DENSITY PACKAGING (ICEPT-HDP), 2011, : 641 - 646
  • [32] The application of transient thermal analysis in solder joint thermal fatigue life analysis
    Kong, Xianglei
    Lu, Fengming
    Li, Weili
    PROCEEDINGS OF 2014 PROGNOSTICS AND SYSTEM HEALTH MANAGEMENT CONFERENCE (PHM-2014 HUNAN), 2014, : 71 - 74
  • [33] The Effect of Solder Paste Volume on Chip Resistor Solder Joint Fatigue Life
    Wang, Huayan
    Pan, Ke
    Ha, Jonghwan
    Cai, Chongyang
    Xu, Jiefeng
    Park, Seungbae
    29TH INTERNATIONAL CONFERENCE ON FLEXIBLE AUTOMATION AND INTELLIGENT MANUFACTURING (FAIM 2019): BEYOND INDUSTRY 4.0: INDUSTRIAL ADVANCES, ENGINEERING EDUCATION AND INTELLIGENT MANUFACTURING, 2019, 38 : 1372 - 1380
  • [34] DIC Based Investigation into the Effect of Mean Temperature of Thermal Cycle on the Strain State in SnAgCu Solder Joint
    Lall, Pradeep
    Mirza, Kazi
    Suhling, Jeff
    INTERNATIONAL TECHNICAL CONFERENCE AND EXHIBITION ON PACKAGING AND INTEGRATION OF ELECTRONIC AND PHOTONIC MICROSYSTEMS, 2015, VOL 2, 2015,
  • [35] Effect of Solder-Joint Geometry on the Low-Cycle Fatigue Behavior of Sn-xAg-0.7Cu
    Lee, Hwa-Teng
    Huang, Kuo-Chen
    JOURNAL OF ELECTRONIC MATERIALS, 2016, 45 (12) : 6102 - 6112
  • [36] Effect of Solder-Joint Geometry on the Low-Cycle Fatigue Behavior of Sn-xAg-0.7Cu
    Hwa-Teng Lee
    Kuo-Chen Huang
    Journal of Electronic Materials, 2016, 45 : 6102 - 6112
  • [37] Study on Intelligent Analysis of the Causes of SMT Solder Joint Defects Based on Fuzzy Neural Network
    Huang, Chunyue
    Wei, Hegeng
    Li, Tianming
    Yan, Dejin
    MANUFACTURING PROCESS TECHNOLOGY, PTS 1-5, 2011, 189-193 : 3257 - +
  • [38] Prediction on response to the thermal fatigue of through-hole solder joint I. Experimental research of solder joint response to the thermal fatigue
    Ding, Y
    Wang, CQ
    Tian, YH
    ACTA METALLURGICA SINICA, 2003, 39 (08) : 879 - 884
  • [39] Study on Intelligent Detecting Technology for Solder Joint Quality of SMT Based on Fuzzy Diagnosis Technique
    Chen Xiaoyong
    Zhou Dejian
    Wu Zhaohua
    Li Chunquan
    2010 11TH INTERNATIONAL CONFERENCE ON ELECTRONIC PACKAGING TECHNOLOGY & HIGH DENSITY PACKAGING (ICEPT-HDP), 2010, : 989 - 992
  • [40] Study on the board-level SMT assembly and solder joint reliability of different QFN packages
    Sun, Wei
    Zhu, W. H.
    Danny, Retuta
    Che, F. X.
    Wang, C. K.
    Sun, Anthony Y. S.
    Tan, H. B.
    EUROSIME 2007: THERMAL, MECHANICAL AND MULTI-PHYSICS SIMULATION AND EXPERIMENTS IN MICRO-ELECTRONICS AND MICRO-SYSTEMS, PROCEEDINGS, 2007, : 344 - +
12345