Experimental determination of mechanical properties and short-time creep of AISI 304 stainless steel at elevated temperatures

被引：0

作者：

Josip Brnic ^{[1
]}

Ji-tai Niu ^{[2
]}

Goran Turkalj ^{[1
]}

Marko Canadija ^{[1
]}

Domagoj Lanc ^{[1
]}

机构：

[1] Faculty of Engineering,University of Rijeka

[2] School of Material and Chemical Engineering,Zhongyuan University of Technology

来源：

International Journal of Minerals,Metallurgy and Materials | 2010年 / 17卷 / 01期

关键词：

AISI; 304; mechanical properties; elevated temperature; creep tests; constitutive model;

D O I：

暂无

中图分类号：

TG142.71 [不锈钢、耐酸钢];

学科分类号：

080502 ;

摘要：

The high temperature properties of AISI 304 stainless steel were studied.Basic data about the employed experimental equipment,testing procedures,and specimen geometry were given.The experimental setup was used to obtain stress-strain diagrams from tensile tests at room temperature as well as several elevated temperatures.Furthermore,the specimens were subjected to short-time creep tests at various temperatures.Stress levels for creep testing were established as a percentage of yield stress.The results indicate that at lowered temperatures and lower stress levels,AISI 304 stainless steel can be used as a sufficiently creep resistant material.

引用

页码：39 / 45

页数：7

共 50 条

[21] Experimental study of the mechanical properties of a new duplex stainless steel exposed to elevated temperatures
Li, Shuobiao
Ding, Wenqi
Zhang, Qingzhao
Xiao, Xiangyong
Zhou, Qinglong
CASE STUDIES IN CONSTRUCTION MATERIALS, 2022, 17
[22] Microstructural evaluation of austenitic stainless steel AISI 304 at the Creep tests
Saenz Palencia, Laura
Avendano, Yurelis
Blanco, Keyla
INGENIERIA UC, 2007, 14 (02): : 42 - 49
[23] A Statistical Study on Stress-Strain Relation of AISI 304 Stainless Steel Under Elevated Temperatures
Park, S. H.
Kim, J. K.
Kim, J. H.
MATERIALS WITH COMPLEX BEHAVIOUR: MODELLING, SIMULATION, TESTING, AND APPLICATIONS, 2010, 3 : 3 - +
[24] Martensitic stainless steel AISI 420—mechanical properties, creep and fracture toughness
J. Brnic
G. Turkalj
M. Canadija
D. Lanc
S. Krscanski
Mechanics of Time-Dependent Materials, 2011, 15 : 341 - 352
[25] Investigation on Mechanical Properties of Pulsed Nd:YAG Laser Welding on AISI 304 Stainless Steel to AISI 1008 Steel
Shamsudin, Shazarel
Yoon, Phoon Chee
MATERIALS AND COMPUTATIONAL MECHANICS, PTS 1-3, 2012, 117-119 : 402 - 408
[26] Experimental investigation on mechanical properties of TIG welded dissimilar AISI 304 and AISI 316 stainless steel using 308 filler rod
Ramakrishnan, A.
Rameshkumar, T.
Rajamurugan, G.
Sundarraju, G.
Selvamuthukumaran, D.
MATERIALS TODAY-PROCEEDINGS, 2021, 45 : 8207 - 8211
[27] Effect of RF carbonitriding and improvement of mechanical properties on AISI 304 stainless steel - A review
Vaijayanth, Sheri
Koppula, Shivani
Sateesh, N.
Subbiah, Ram
MATERIALS TODAY-PROCEEDINGS, 2020, 27 : 1655 - 1659
[28] MECHANICAL AND METALLURGICAL PROPERTIES OF FRICTION-STIR-WELDED AISI 304 STAINLESS STEEL
Govindaraj, Sundar Raju
Karuppan, Sivakumar
MATERIALI IN TEHNOLOGIJE, 2023, 57 (02): : 127 - 134
[29] Phase transition and mechanical properties of ZrNxOy thin films on AISI 304 stainless steel
Huang, Jia-Hong
Lin, Tzu-Chun
Yu, Ge-Ping
SURFACE & COATINGS TECHNOLOGY, 2011, 206 (01): : 107 - 116
[30] EXPERIMENTAL-OBSERVATIONS AND ANALYSIS OF CREEP CAVITATION IN AISI TYPE-304 STAINLESS-STEEL
LIU, TS
FIELDS, RJ
FARIBORZ, SJ
HARLOW, DG
DELPH, TJ
ACTA METALLURGICA, 1988, 36 (09): : 2481 - 2491

← 1 2 3 4 5 →