Experimental determination of mechanical properties and short-time creep of AISI 304 stainless steel at elevated temperatures

被引：0
|
作者：
Josip Brnic [1 ]
Ji-tai Niu [2 ]
Goran Turkalj [1 ]
Marko Canadija [1 ]
Domagoj Lanc [1 ]
机构：
[1] Faculty of Engineering,University of Rijeka
[2] School of Material and Chemical Engineering,Zhongyuan University of Technology
来源：
International Journal of Minerals,Metallurgy and Materials | 2010年 / 17卷 / 01期
关键词：
AISI; 304; mechanical properties; elevated temperature; creep tests; constitutive model;
D O I：
暂无
中图分类号：
TG142.71 [不锈钢、耐酸钢];
学科分类号：
080502 ;
摘要：
The high temperature properties of AISI 304 stainless steel were studied.Basic data about the employed experimental equipment,testing procedures,and specimen geometry were given.The experimental setup was used to obtain stress-strain diagrams from tensile tests at room temperature as well as several elevated temperatures.Furthermore,the specimens were subjected to short-time creep tests at various temperatures.Stress levels for creep testing were established as a percentage of yield stress.The results indicate that at lowered temperatures and lower stress levels,AISI 304 stainless steel can be used as a sufficiently creep resistant material.
引用
收藏
页码：39 / 45
页数：7
相关论文
共 50 条
  • [1] Experimental determination of mechanical properties and short-time creep of AISI 304 stainless steel at elevated temperatures
    Brnic, Josip
    Niu, Ji-tai
    Turkalj, Goran
    Canadija, Marko
    Lanc, Domagoj
    [J]. INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS, 2010, 17 (01) : 39 - 45
  • [2] Experimental determination of mechanical properties and short-time creep of AISI 304 stainless steel at elevated temperatures
    Josip Brnic
    Ji-tai Niu
    Goran Turkalj
    Marko Canadija
    Domagoj Lanc
    [J]. International Journal of Minerals, Metallurgy, and Materials, 2010, 17 : 39 - 45
  • [3] EFFECT OF CREEP EXPOSURE ON MECHANICAL-PROPERTIES OF AISI 304 STAINLESS-STEEL
    ETIENNE, CF
    ZEEDIJK, HB
    SCHEEPENS, CP
    [J]. METALS TECHNOLOGY, 1979, 6 (AUG): : 285 - 290
  • [4] MICROMECHANICAL INVESTIGATION OF AISI-304 STAINLESS-STEEL CREEP TESTED AT SEVERAL ELEVATED-TEMPERATURES
    MOTEFF, J
    ROSA, E
    [J]. JOURNAL OF METALS, 1983, 35 (12): : 54 - 54
  • [5] Effect of Friction Time on Microstructure and Mechanical Properties of Friction Welded AISI 304 Stainless Steel to AISI 1060 Steel
    Ates, Hakan
    Kaya, Nihat
    [J]. METALLOFIZIKA I NOVEISHIE TEKHNOLOGII, 2013, 35 (02): : 241 - 252
  • [6] MECHANICAL AND MICROSTRUCTURAL PROPERTIES OF FRICTION WELDED AISI 304 STAINLESS STEEL TO AISI 1060 STEEL
    Ates, H.
    Kaya, N.
    [J]. ARCHIVES OF METALLURGY AND MATERIALS, 2014, 59 (03) : 841 - 846
  • [7] Vibratory cavitation erosion behavior of AISI 304 stainless steel in water at elevated temperatures
    Li, Zhen
    Han, Jiesheng
    Lu, Jinjun
    Zhou, Jiansong
    Chen, Jianmin
    [J]. WEAR, 2014, 321 : 33 - 37
  • [8] EFFECTS OF IRRADIATION ON CREEP AND TENSILE PROPERTIES OF ANNEALED AISI 304 STAINLESS STEEL
    IRVIN, JE
    WILLIAMS, JA
    [J]. TRANSACTIONS OF THE AMERICAN NUCLEAR SOCIETY, 1966, 9 (02): : 387 - +
  • [9] Application of Support Vector Regression on Mechanical Properties of Austenitic Stainless Steel 304 at Elevated Temperatures
    Kanumuri, Lakshmi
    Srishuka, M.
    Gupta, Amit Kumar
    Singh, Swadesh Kumar
    [J]. MATERIALS TODAY-PROCEEDINGS, 2015, 2 (4-5) : 1479 - 1486
  • [10] Mechanical properties of an austenitic stainless steel at elevated temperatures
    Outinen, J
    Mäkeläinen, P
    [J]. ADVANCES IN STEEL STRUCTURES, VOLS 1 AND 2, 1999, : 1063 - 1069
12345