Optical and structural properties of highly porous shell structured Fe doped TiO2 thin films

TiO2thin films with 0.2 wt%, 0.4 wt%, 0.6wt%, and 0.8 wt% Fe were prepared on glass and silicon substrates using sol–gel spin coating technique. The optical cut-off points are increasingly red-shifted and the absorption edge is shifted over the higher wavelength region with Fe content increasing. As Fe content increases, the optical band gap decreases from 3.03 to 2.48 eV whereas the tail width increases from 0.26 to 1.43 eV. The X-ray diffraction(XRD) patterns for doped films at 0.2 wt% and0.8 wt% Fe reveal no characteristic peaks, indicating that the film is amorphous whereas undoped TiO2exhibits(101) orientation with anatase phase. Thin films of higher Fe content exhibit a homogeneous, uniform, and nanostructured highly porous shell morphology.