Effect of Equal Channel Angular Extrusion on the Microstructures and Properties of Two Extruded Al-Mg-Si Alloys

被引：0

作者：

G.W.Lorimer

机构：

[1] Grosvenor Street

[2] Ml 7HS

[3] School of Materials

[4] The University of Manchester

[5] UK

来源：

Journal of Materials Science & Technology | 2005年 / 05期

关键词：

Equal channel angular extrusion; Electron backscattered diffraction; Al-Mg-Si alloys;

D O I：

暂无

中图分类号：

TG113 [金相学（金属的组织与性能）];

学科分类号：

摘要：

The effect of equal channel angular extrusion (ECAE) on the microstructure of two Al-Mg-Si extrusion alloys wasinvestigated by high resolution electron backscattered diffraction (EBSD) using a field emission gun scanning electronmicroscope (FEG-SEM) and a transmission electron microscope (TEM). Two contrasting alloys: a dilute alloy, basedon alloy 6061 and a concentrated alloy, based on alloy 6069 were employed for this research. It has been foundthat prior ECAE to extrusion promotes high angle grain boundaries (HAGBs) in the extrusions, and the increase inHAGBs ratio is due to the large shear deformation involved in the process of ECAE. Tensile testing results show thata further ageing treatment strengthens the alloys after extrusion and the ECAE processed extrusions are more ductilethan conventional extrusions.

引用

页码：17 / 23

页数：7

共 50 条

[21] Mechanical properties of 1.5 wt.% TiB2-added hypoeutectic Al-Mg-Si alloys processed by equal channel angular pressing
Syukron, Muhammad
Ojima, Mayumi
Abu Seman, Anasyida
Hussain, Zuhailawati
Koseki, Toshihiko
5TH INTERNATIONAL CONFERENCE ON RECENT ADVANCES IN MATERIALS, MINERALS AND ENVIRONMENT (RAMM) & 2ND INTERNATIONAL POSTGRADUATE CONFERENCE ON MATERIALS, MINERAL AND POLYMER (MAMIP), 2016, 19 : 106 - 112
[22] Effect of Cu and excess Si on mechanical properties in Al-Mg-Si alloys
Matsuda, K
Kido, K
Uetani, Y
Ikeno, S
PRICM 4: FORTH PACIFIC RIM INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND PROCESSING, VOLS I AND II, 2001, : 2619 - 2622
[23] Microstructure and strengthening mechanisms in an Al-Mg-Si alloy processed by equal channel angular pressing (ECAP)
Khelfa, T.
Rekik, M. A.
Munoz-Bolanos, J. A.
Cabrera-Marrero, J. M.
Khitouni, M.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2018, 95 (1-4): : 1165 - 1177
[24] Microstructure and strengthening mechanisms in an Al-Mg-Si alloy processed by equal channel angular pressing (ECAP)
Khelfa, T. (tarekkhelfa@yahoo.fr), 2018, Springer London (95): : 1 - 4
[25] Dynamic ageing and the mechanical response of Al-Mg-Si alloy through equal channel angular pressing
Vaseghi, Majid
Taheri, Ali Karimi
Hong, Sun Ig
Kim, Hyoung Seop
MATERIALS & DESIGN, 2010, 31 (09) : 4076 - 4082
[26] Structure and microstructure evolution of Al-Mg-Si alloy processed by equal-channel angular pressing
Khelfa, T.
Rekik, M. A.
Khitouni, M.
Cabrera-Marrero, J. M.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2017, 92 (5-8): : 1731 - 1740
[27] Microstructure and strengthening mechanisms in an Al-Mg-Si alloy processed by equal channel angular pressing (ECAP)
T. Khelfa
M. A. Rekik
J. A. Muñoz-Bolaños
J. M. Cabrera-Marrero
M. Khitouni
The International Journal of Advanced Manufacturing Technology, 2018, 95 : 1165 - 1177
[28] Effect of Multidirectional Forging on the Microstructures and Mechanical Properties of the Al-Mg-Si Alloy
Mao, Juncheng
Yi, Youping
Huang, Shiquan
He, Hailin
Fu, Yunfan
Tang, Jiaguo
METALS AND MATERIALS INTERNATIONAL, 2024, 30 (10) : 2898 - 2915
[29] Effect of Alloy Elements on Microstructures and Mechanical Properties in Al-Mg-Si Alloy
Kato, Yoshikazu
Hisayuki, Koji
Sakaguchi, Masashi
Higashi, Kenji
PROCEEDINGS OF THE 13TH INTERNATIONAL CONFERENCE ON ALUMINUM ALLOYS (ICAA13), 2012, : 1521 - 1526
[30] Effect of second phase on the mechanical properties of Mg-Al-Zn alloy by equal channel angular extrusion
Ding, Wenjiang
Jin, Li
Lin, Dongliang
Zeng, Xiaoqin
Mao, Dali
2006 BIMW: 2006 BEIJING INTERNATIONAL MATERIALS WEEK, PTS 1-4: MAGNESIUM, 2007, 546-549 : 249 - +

← 1 2 3 4 5 →