Effect of Si addition on microstructure and mechanical properties of Al-Mg-Si-Zn alloy

被引:0
|
作者
Fan-bo Meng [1 ]
Hong-jun Huang [1 ]
Xiao-guang Yuan [1 ]
Ze-wen Cui [2 ]
Xian-lei Hu [3 ]
机构
[1] School of Materials Science and Engineering, Shenyang University of Technology
[2] School of Materials Science and Engineering, Liaoning Technology University
[3] State Key Laboratory of Rolling and Automation, Northeastern University
关键词
Si content; mean shape factor; area fraction; tensile strength; aluminum alloy;
D O I
暂无
中图分类号
TG146.21 [];
学科分类号
080502 ;
摘要
The effect of Si addition on the microstructure and mechanical properties of Al-Mg-Si-Zn aluminum alloys were investigated. Results show that the microstructure of Al-Mg-Si-Zn alloy with low Si contents is mainly composed of Mg2 Si and Mg5 Si6 phases. With the increasing of Si content, Si and Al3.21Si0.47phases precipitate in the form of eutectic phases in the alloys, at the same time, the mean shape factor of the second phase firstly increases and then decreases. Regression analysis results show that the Si content has the main influence and the mean shape factor has the least influence on tensile strength. Tensile strength increases significantly with the addition of Si, however, there is a remarkable drop in the elongation of the alloys. Decreased elongation is related to the formation of monotonous Al(200) structure and the enlargement of interplanar spacing of(111) and(200) crystalline planes.
引用
收藏
页码:15 / 20
页数:6
相关论文
共 50 条
  • [31] Effect of Cd and Sn addition on the microstructure and mechanical properties of Al-Si-Cu-Mg cast alloy
    Li, RD
    Li, RX
    Yu, L
    Hu, ZQ
    14TH CONGRESS OF INTERNATIONAL FEDERATION FOR HEAT TREATMENT AND SURFACE ENGINEERING, VOLS 1 and 2, PROCEEDINGS, 2004, : 113 - 116
  • [32] Effect of Ti on microstructure and mechanical properties of die-cast Al-Mg-Zn-Si alloy
    Zhang, Yu
    Yan, Feng
    Zhao, Yu-hong
    Song, Chun-li
    Hou, Hua
    MATERIALS RESEARCH EXPRESS, 2020, 7 (03)
  • [33] Influence of Gd Content on the Microstructure and Mechanical Properties of Zn-Al-Mg-Si Alloy
    Wei, Aili
    Liu, Xinghai
    Zhang, Kunyu
    Liang, Wei
    ADVANCES IN MATERIALS AND MATERIALS PROCESSING, PTS 1-3, 2013, 652-654 : 1059 - 1062
  • [34] Effect of Mg/Si mass ratio on microstructure and mechanical properties of Al-Mg-Si cast aluminum alloy
    Jiayan Chen
    Ce Zheng
    Cheng Zhu
    Yingju Li
    Tianjiao Luo
    Cuirong Liu
    Shaoqiang Xu
    Yuansheng Yang
    China Foundry, 2025, 22 (02) : 163 - 172
  • [35] Effect of Mg/Si mass ratio on microstructure and mechanical properties of Al-Mg-Si cast aluminum alloy
    Jia-yan Chen
    Ce Zheng
    Cheng Zhu
    Ying-ju Li
    Tian-jiao Luo
    Cui-rong Liu
    Shao-qiang Xu
    Yuan-sheng Yang
    China Foundry, 2025, 22 (2) : 163 - 172
  • [36] Effect of Zn on microstructure and properties of Al-Si alloy
    Zhao, Haofeng
    Wang, Ling
    Liu, Xuedong
    Te Zhong Zhu Zao Ji You Se He Jin/Journal of Special Casting & Nonferrous Alloys, 1994, (02): : 5 - 7
  • [37] Effect of Heat Treatment and Zn Addition on Microstructure and Properties of Al-Si-Cu-Mg-Cr-B Alloy
    Zheng, Jiale
    Du, Xiaodong
    INTERNATIONAL JOURNAL OF METALCASTING, 2024,
  • [38] Effects of interrupted ageing and asymmetric rolling on microstructures, mechanical properties, and intergranular corrosion behavior of Al-Mg-Si-Zn alloy
    Tian Ai-qin
    Xu Xue-hong
    Sun Lin
    Deng Yun-lai
    JOURNAL OF CENTRAL SOUTH UNIVERSITY, 2022, 29 (03) : 821 - 835
  • [39] Effects of Sr and Nd Addition on Microstructure and Mechanical Properties of Mg-9Al-1Si-0.3Zn Alloy
    Zou Zhiwen
    Xiong Shoumei
    RARE METAL MATERIALS AND ENGINEERING, 2011, 40 (08) : 1402 - 1406
  • [40] Effect of Scandium on Microstructure and Mechanical Properties of Cast Al-Si-Mg Alloy
    Kaiser, M. S.
    Basher, M. R.
    Kurny, A. S. W.
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2012, 21 (07) : 1504 - 1508