Research on Corrosion Resistance of Checker Bricks in Regenerators of Glass Furnaces

被引：0

作者：

AN Yi ^{[1
]}

LIU Hao ^{[1
]}

WANG Zhoufu ^{[1
]}

MA Yan ^{[1
]}

WANG Xitang ^{[1
]}

机构：

[1] State Key Laboratory of Refractories and Metallurgy,Wuhan University of Science and Technology

来源：

China's Refractories | 2023年 / 32卷 / 01期

基金：

中国国家自然科学基金;

关键词：

D O I：

10.19691/j.cnki.1004-4493.2023.01.004

中图分类号：

TQ171.623 []; TQ175.7 [耐火材料制品];

学科分类号：

0805 ; 080502 ; 080706 ;

摘要：

To extend the service life of the upper checker bricks in the regenerator of glass furnaces with petroleum coke as fuel,the corrosion resistance of magnesia-chrome and alumina-chrome bricks with the similar apparent porosity was systematically researched.The results show that the Cr2O3content and the microstructure present significant effects on the corrosion resistance.The molten corrosion reagent forms silicate and vanadate phases with low melting points between MgO crystals in magnesia-chrome bricks,and the volume strain generated by the melting and solidification process leads to the cracking and spalling of refractories,which intensifies the corrosion process.The encapsulation of alumina particles by alumina-chrome solid solutions in alumina-chrome bricks avoids contact with the low melting point liquid phases and improves the corrosion resistance of refractories.

引用

页码：20 / 24

页数：5

共 50 条

[21] Discussion on "fine or coarse-ground mixtures for checker brick in glass furnaces"
不详
JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1922, 5 (12) : B346 - B347
[22] Environmental impact for regenerators materials selection in soda-lime flat glass furnaces
Meynckens, Jean-Pierre
Cherdon, Benoit
GLASS - THE CHALLENGE FOR THE 21ST CENTURY, 2008, 39-40 : 619 - +
[23] THERMAL INSULATION AND HERMETIC SEALING OF PORTS AND REGENERATORS OF GLASS MELTING FURNACES USING A SPRAYING METHOD
ZASYPKIN, VI
FEDORIV, MP
KATKOV, VG
POPOV, ON
KRASNYI, BL
GLASS AND CERAMICS, 1985, 42 (11-12) : 518 - 522
[24] Postmortem analyses of salvaged conventional silica bricks from glass production furnaces
Wereszczak, A
Wang, H
Karakus, M
Curtis, W
Aume, V
VerDow, D
GLASS SCIENCE AND TECHNOLOGY-GLASTECHNISCHE BERICHTE, 2000, 73 (06): : 165 - 174
[25] Effectiveness of high temperature innovative geometry fixed ceramic matrix regenerators used in glass furnaces
Wolkowycki, Grzegorz
ARCHIVES OF THERMODYNAMICS, 2016, 37 (01) : 113 - 126
[26] A METHOD OF MONITORING CORROSION OF THE REFRACTORIES IN GLASS MELTING FURNACES
GOROBETS, FT
SAMSONOV, VI
USTINOV, AG
GLASS AND CERAMICS, 1983, 40 (7-8) : 339 - 341
[27] Silica Crown Refractory Corrosion in Glass Melting Furnaces
Balandis, A.
Nizeviciene, D.
SCIENCE OF SINTERING, 2011, 43 (03) : 295 - 303
[28] CORROSION-RESISTANCE OF DOLOMA BRICKS IN CONTACT WITH SLAGS
QUON, DHH
WANG, SSB
AOTA, J
WHEAT, TA
BELL, KE
CANADIAN CERAMICS QUARTERLY-JOURNAL OF THE CANADIAN CERAMIC SOCIETY, 1988, 57 (03): : 53 - 59
[29] THERMAL INSULATION AND HERMETIC SEALING OF PORTS AND REGENERATORS OF GLASS MELTING FURNACES USING A SPRAYING METHOD.
Zasypkin, V.I.
Fedoriv, M.P.
Katkov, V.G.
Popov, O.N.
Krasnyi, B.L.
Glass and Ceramics (English translation of Steklo i Keramika), 1985, 42 (11): : 518 - 522
[30] Corrosion resistance of float glass
N. V. Temnyakova
L. A. Shitova
E. V. Yuneva
E. P. Zinina
Glass and Ceramics, 2009, 66 : 79 - 81

← 1 2 3 4 5 →