Optimization of thermoacoustic refrigerator using response surface methodology

被引：0

作者：

HARIHARAN N. M. ^{[1
]}

SIVASHANMUGAM P. ^{[1
]}

KASTHURIRENGAN S. ^{[2
]}

机构：

[1] Department of Chemical Engineering, National Institute of Technology

[2] Centre for Cryogenic Technology, Indian Institute of Science

来源：

Journal of Hydrodynamics | 2013年 / 25卷 / 01期

关键词：

Design Environment for Low-amplitude ThermoAcoustic Energy Conversion (DeltaEC); optimization; Response Surface Methodology (RSM); temperature difference; thermoacoustic refrigerator (TAR);

D O I：

暂无

中图分类号：

TB651 [制冷机];

学科分类号：

0807 ; 080705 ;

摘要：

Thermoacoustic refrigerator (TAR) converts acoustic waves into heat without any moving parts. The study presented here aims to optimize the parameters like frequency, stack position, stack length, and plate spacing involving in designing TAR using the Response Surface Methodology (RSM). A mathematical model is developed using the RSM based on the results obtained from DeltaEC software. For desired temperature difference of 40 K, optimized parameters suggested by the RSM are the frequency 254 Hz, stack position 0.108 m, stack length 0.08 m, and plate spacing 0.0005 m. The experiments were conducted with optimized parameters and simulations were performed using the Design Environment for Low-amplitude ThermoAcoustic Energy Conversion (DeltaEC) which showed similar results.

引用

页码：72 / 82

页数：11

共 50 条

[31] Design methodology of standing-wave thermoacoustic refrigerator: theoretical analysis
Mohanad Q. Kamil
Samir Gh. Yahya
Itimad D. J. Azzawi
[J]. International Journal of Air-Conditioning and Refrigeration, 31
[32] Frequency Tuning Algorithm for Loudspeaker Driven Thermoacoustic Refrigerator Optimization
Kondratenko, Yuriy P.
Korobko, Oleksiy
Kozlov, Oleksiy V.
[J]. MODELING AND SIMULATION IN ENGINEERING, ECONOMICS, AND MANAGEMENT, MS 2012, 2012, 115 : 270 - 279
[33] SIMULTANEOUS OPTIMIZATION OF FOUR PARAMETERS IN THE STACK UNIT OF A THERMOACOUSTIC REFRIGERATOR
Zolpakar, Nor Atiqah
Mohd-Ghazali, Normah
Ahmad, Robiah
[J]. INTERNATIONAL JOURNAL OF AIR-CONDITIONING AND REFRIGERATION, 2014, 22 (02)
[34] Optimization of Vegetal Pear Drying Using Response Surface Methodology
Perez-Francisco, J. M.
Cerecero-Enriquez, R.
Andrade-Gonzalez, I.
Ragazzo-Sanchez, J. A.
Luna-Solano, G.
[J]. DRYING TECHNOLOGY, 2008, 26 (11) : 1401 - 1405
[35] Aintshop production line optimization using Response Surface Methodology
Dengiz, Berna
Belgin, Onder
[J]. PROCEEDINGS OF THE 2007 WINTER SIMULATION CONFERENCE, VOLS 1-5, 2007, : 1646 - 1651
[36] FOREBODY OPTIMIZATION USING RESPONSE SURFACE METHODOLOGY WITH GENETIC ALGORITHM
Kandemir, Omer
Tuncer, Ismail H.
[J]. PROCEEDINGS OF ASME 2021 INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION (IMECE2021), VOL 6, 2021,
[37] Design and optimization of a siphon turbine using the response surface methodology
Guerra, Juliana
Velasquez, Laura
Rubio-Clemente, Ainhoa
Jaramillo, Leyla
Chica, Edwin
[J]. RESULTS IN ENGINEERING, 2024, 22
[38] Experimental optimization of deep drawing using response surface methodology
Chu, Tsuhsiao
Fuh, Kuanghua
Yeh, Weiching
[J]. FRONTIERS OF MANUFACTURING AND DESIGN SCIENCE II, PTS 1-6, 2012, 121-126 : 1495 - +
[39] Optimization of Milk Sample Cleanup Using Response Surface Methodology
Lucas Ulisses Rovigatti Chiavelli
Antonio Cesar Godoy
Roberta da Silveira
Patricia Daniele Silva Santos
Tiago A. M. Lopes
Oscar Oliveira Santos
Jesuí Vergílio Visentainer
[J]. Food Analytical Methods, 2020, 13 : 166 - 175
[40] Optimization of osmotic dehydration of potato using response surface methodology
Eren, Ismail
Kaymak-Ertekin, Figen
[J]. JOURNAL OF FOOD ENGINEERING, 2007, 79 (01) : 344 - 352

← 1 2 3 4 5 →