Optimization of thermoacoustic refrigerator using response surface methodology

被引：0
|
作者：
HARIHARAN N. M. [1 ]
SIVASHANMUGAM P. [1 ]
KASTHURIRENGAN S. [2 ]
机构：
[1] Department of Chemical Engineering, National Institute of Technology
[2] Centre for Cryogenic Technology, Indian Institute of Science
来源：
Journal of Hydrodynamics | 2013年 / 25卷 / 01期
关键词：
Design Environment for Low-amplitude ThermoAcoustic Energy Conversion (DeltaEC); optimization; Response Surface Methodology (RSM); temperature difference; thermoacoustic refrigerator (TAR);
D O I：
暂无
中图分类号：
TB651 [制冷机];
学科分类号：
0807 ; 080705 ;
摘要：
Thermoacoustic refrigerator (TAR) converts acoustic waves into heat without any moving parts. The study presented here aims to optimize the parameters like frequency, stack position, stack length, and plate spacing involving in designing TAR using the Response Surface Methodology (RSM). A mathematical model is developed using the RSM based on the results obtained from DeltaEC software. For desired temperature difference of 40 K, optimized parameters suggested by the RSM are the frequency 254 Hz, stack position 0.108 m, stack length 0.08 m, and plate spacing 0.0005 m. The experiments were conducted with optimized parameters and simulations were performed using the Design Environment for Low-amplitude ThermoAcoustic Energy Conversion (DeltaEC) which showed similar results.
引用
收藏
页码：72 / 82
页数：11
相关论文
共 50 条
  • [1] Optimization of thermoacoustic refrigerator using response surface methodology
    N. M. Hariharan
    P. Sivashanmugam
    S. Kasthurirengan
    [J]. Journal of Hydrodynamics, 2013, 25 : 72 - 82
  • [2] Optimization of thermoacoustic refrigerator using response surface methodology
    Hariharan, N. M.
    Sivashanmugam, P.
    Kasthurirengan, S.
    [J]. JOURNAL OF HYDRODYNAMICS, 2013, 25 (01) : 72 - 82
  • [3] Optimization of thermoacoustic engine driven thermoacoustic refrigerator using response surface methodology
    Desai, A. B.
    Desai, K. P.
    Naik, H. B.
    Atrey, M. D.
    [J]. 26TH INTERNATIONAL CRYOGENIC ENGINEERING CONFERENCE & INTERNATIONAL CRYOGENIC MATERIALS CONFERENCE 2016, 2017, 171
  • [4] DYNAMIC MESH MODELING AND OPTIMIZATION OF A THERMOACOUSTIC REFRIGERATOR USING RESPONSE SURFACE METHODOLOGY
    Liu, Liu
    Yang, Zhe
    Liu, Yingwen
    Gao, Bo
    [J]. THERMAL SCIENCE, 2018, 22 : S739 - S747
  • [5] Optimization of thermoacoustic primemover using response surface methodology
    Hariharan, N. M.
    Sivashanmugam, P.
    Kasthurirengan, S.
    [J]. HVAC&R RESEARCH, 2012, 18 (05): : 890 - 903
  • [6] DESIGN AND OPTIMIZATION OF ANHARMONIC THERMOACOUSTIC REFRIGERATOR
    Abdel-Rahman, Ehab
    Arafa, Nadim
    Addas, Karim
    Larsson, Krister
    [J]. PROCEEDINGS OF THE 17TH INTERNATIONAL CONGRESS ON SOUND AND VIBRATION, 2010,
  • [7] Thermoacoustic Refrigerator's Stack Optimization
    El-Fawal, Mawahib Hassan
    Mohd-Ghazali, Normah
    Yaacob, Mohd Shafik
    Darus, Amer Nordin
    [J]. 10TH ASIAN INTERNATIONAL CONFERENCE ON FLUID MACHINERY, 2010, 1225 : 193 - 204
  • [8] Optimization of the Stack Unit in a Thermoacoustic Refrigerator
    Zolpakar, Nor Atiqah
    Mohd-Ghazali, Normah
    Ahmad, Robiah
    [J]. HEAT TRANSFER ENGINEERING, 2017, 38 (04) : 431 - 437
  • [9] OPTIMIZATION OF A THERMOACOUSTIC REFRIGERATOR WITH AN EVOLUTIONARY ALGORITHM APPROACH
    Zolpakar, Nor Atiqah
    Mohd-Ghazali, Normah
    [J]. JURNAL TEKNOLOGI, 2016, 78 (9-2): : 19 - 24
  • [10] Design and optimization of a heat driven thermoacoustic refrigerator
    Ghorbanian, K.
    Karimi, M.
    [J]. APPLIED THERMAL ENGINEERING, 2014, 62 (02) : 653 - 661
12345