Laser micro drilling of around 3 microns into Ajinomoto Build-up Film

被引：0

作者：

Otsu, Toshio ^{[1
]}

Tani, Shuntaro ^{[1
]}

Nagayama, Shoko ^{[2
]}

Miyamoto, Ryo ^{[2
]}

Okada, George ^{[3
]}

Nakamura, Naoyuki ^{[4
]}

Nishimae, Junichi ^{[4
]}

Tamaru, Hroharu ^{[5
]}

Kobayashi, Yohei ^{[1
]}

机构：

[1] Univ Tokyo, Chiba, Japan

[2] Ajinomoto Fine Techno Co Inc, Yokohama, Kanagawa, Japan

[3] Spectronix Co, Osaka, Japan

[4] Mitsubishi Electr Corp, Kobe, Hyogo, Japan

[5] Univ Tokyo, Tokyo, Japan

来源：

PROCEEDINGS OF THE IEEE 74TH ELECTRONIC COMPONENTS AND TECHNOLOGY CONFERENCE, ECTC 2024 | 2024年

关键词：

ABF; via; DUV laser; direct laser processing; HIGH-DENSITY;

D O I：

10.1109/ECTC51529.2024.00133

中图分类号：

TM [电工技术]; TN [电子技术、通信技术];

学科分类号：

0808 ; 0809 ;

摘要：

As the electrode spacing of the chip decreases, the diameter of the via holes in the redistribution layer or build-up substrate must also decrease. Here, we have demonstrated a via hole creation with a diameter of 3 microns on Ajinomoto Build-up Film (R) (ABF) by irradiation of a picosecond, 266-nm wavelength laser. A copper wiring pattern was created on a glass substrate, and 3-micorometer-thick ABF was attached on top of the pattern, which was used as a model substrate.

引用

页码：829 / 833

页数：5

共 50 条

[1] Reliability of Heterogeneous Integration on Hybrid Substrate With Ajinomoto Build-Up Film
Yang, Channing Cheng-Lin
Lau, John H.
Peng, Andy Yan-Jia
Teng, Vincent
Chen, Gary Chang-Fu
Huang, Jones Yu-Cheng
Chen, Y. H.
Liu, Hsing-Ning
Tseng, Tzyy-Jang
Li, Ming
2023 IEEE 73RD ELECTRONIC COMPONENTS AND TECHNOLOGY CONFERENCE, ECTC, 2023, : 542 - 547
[2] Measurement of Laser Drilling Shift for Opaque Build-up Film by Infrared Microscope
Ke, Chung-Yu
Chen, Liang-Pin
2022 17TH INTERNATIONAL MICROSYSTEMS, PACKAGING, ASSEMBLY AND CIRCUITS TECHNOLOGY CONFERENCE (IMPACT), 2022,
[3] 2.3D Hybrid Substrate with Ajinomoto Build-Up Film for Heterogeneous Integration
Chen, Gary Chang-Fu
Lau, John H.
Yang, Channing Cheng-Lin
Huang, Jones Yu-Cheng
Peng, Andy Yan-Jia
Liu, Hsing-Ning
Tseng, Tzyy-Jang
Li, Ming
IEEE 72ND ELECTRONIC COMPONENTS AND TECHNOLOGY CONFERENCE (ECTC 2022), 2022, : 30 - 37
[4] Pinhole formation and its mitigation for Cu electrodeposition on the Ajinomoto build-up film (ABF) with different surface roughnesses
Hsu, Pei-Chia
Yang, Zhao-Yu
Lee, Chi
Ho, Cheng-En
Chen, Chih-Ming
Shen, Yu-An
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2025, 36 : 193 - 202
[5] High-speed electrodeposition for Cu pillar fabrication and Cu pillar adhesion to an Ajinomoto build-up film (ABF)
Lee, Pei-Tzu
Chang, Chih-Hao
Lee, Cheng-Yu
Wu, Ying-Syuan
Yang, Cheng-Hsien
Ho, Cheng-En
MATERIALS & DESIGN, 2021, 206
[6] High Frequency Characterization of Ajinomoto Build-Up (ABF) Laminates for Millimeter Wave Applications
Jogalekar, Aditya N.
McGarry, Michael
Lee, Mark
Murugan, Rajan
Iyer, Mahadevan
Henderson, Rashaunda
2024 103RD ARFTG MICROWAVE MEASUREMENT CONFERENCE, ARFTG 2024, 2024,
[7] A study of the μ-solder joint on Ajinomoto Build-up Film using the Solder On Pad (SOP) process for Multi-Chip Module
Zhang, Shuye
Liu, Jinhong
Liu, Junfu
He, Peng
2024 25TH INTERNATIONAL CONFERENCE ON ELECTRONIC PACKAGING TECHNOLOGY, ICEPT, 2024,
[8] A Novel Build-up Film for FCBGA Application
Lin, Deyu
He, Yufang
2024 25TH INTERNATIONAL CONFERENCE ON ELECTRONIC PACKAGING TECHNOLOGY, ICEPT, 2024,
[9] Local heat treatment of a laser build-up
Theron, Maritha
van Rooyen, Corney
Malabi, Khoro
Hoosain, Shaik
2ND INTERNATIONAL CONFERENCE ON SUSTAINABLE MATERIALS PROCESSING AND MANUFACTURING (SMPM 2019), 2019, 35 : 377 - 382
[10] Validation of Film Dosimetry in the Dose Build-Up Region
Corradini, N.
Presilla, S.
Sassowsky, M.
Schombourg, K.
MEDICAL PHYSICS, 2012, 39 (06) : 3613 - 3613

← 1 2 3 4 5 →