THERMAL PERFORMANCES OF ASINUSOIDAL PIN FIN: AN ANALYTICALSOLUTION

被引:0
|
作者
El Moutaouakil, L. [1 ]
机构
[1] Cadi Ayyad Univ, Fac Sci Semlalia, Dept Phys, Fluid Mech & Energet Lab, BP 2390, Marrakech, Morocco
来源
HIGH TEMPERATURE MATERIAL PROCESSES | 2025年 / 29卷 / 01期
关键词
extraction mode; injection mode; heat generation; sinusoidal; convection; radiation; analytical; temperature dependent properties; efficiency; effectiveness; ADOMIAN DECOMPOSITION METHOD; HEAT-TRANSFER; POROUS FINS; TEMPERATURE; CONDUCTIVITY; CONVERGENCE;
D O I
10.1615/HighTempMatProc.2024054101
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
In this paper, the Adomian decomposition method is applied to determine the efficiency and the ef-fectiveness of a heat-generating sinusoidal pin fin, involving convective and radiative heat transferswith different environments. The developed analytical solution takes into account the fact that sev-eral characteristics of sinusoidal pin fin are temperature-dependent. The parameters considered tobe temperature-dependent are the thermal conductivity, the convective heat transfer coefficient, theemissivity, and the heat generation rate. To check the applicability of the analytical method, a numer-ical solution is carried out using the finite volume approach. Results from Adomian decompositionmethod were used to investigate the effect of various parameters on the thermal performances of thesinusoidal pin fin. These results show a good agreement with numerical data. In addition, sinusoidalpin fins are found to perform better than the conventional pin fins with uniform cross section
引用
收藏
页码:15 / 32
页数:18
相关论文
共 50 条
  • [1] Hydraulic and thermal performances of micro pin fin heat sink with increasing pin fin height
    Li, Hang
    Jing, Dalei
    CASE STUDIES IN THERMAL ENGINEERING, 2024, 53
  • [2] Hydraulic and thermal performances of metal foam and pin fin hybrid heat sink
    Li, Yongtong
    Gong, Liang
    Xu, Minghai
    Joshi, Yogendra
    APPLIED THERMAL ENGINEERING, 2020, 166
  • [3] Comparison of thermal performances of plate-fin and pin-fin heat sinks subject to an impinging flow
    Kim, Dong-Kwon
    Kim, Sung Jin
    Bae, Jin-Kwon
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2009, 52 (15-16) : 3510 - 3517
  • [4] Comparison of thermal performances of plate-fin and pin-fin heat sinks subject to an impinging flow
    Kim, Dong-Kwon
    Bae, Jin-Kwon
    Kim, Sung Jin
    2008 11TH IEEE INTERSOCIETY CONFERENCE ON THERMAL AND THERMOMECHANICAL PHENOMENA IN ELECTRONIC SYSTEMS, VOLS 1-3, 2008, : 360 - 366
  • [5] Thermal Performances of Hybrid Pin Fin with Connector Heat Sink Under Natural Convection
    Bahsan, Rosnadiah
    Zamri, Muhammad Aniq Asyraf Mohd
    Tijani, Alhassan Salami
    Kubenthiran, Jeeventh
    Abdulrahman, Sajith Thottathil
    Muritala, Ibrahim Kolawole
    PERTANIKA JOURNAL OF SCIENCE AND TECHNOLOGY, 2022, 30 (03): : 2077 - 2096
  • [6] Evaluation of Thermal Performances of Various Fan-Shaped Pin-Fin Geometries
    Moon, Mi-Ae
    Kim, Kwang-Yong
    TRANSACTIONS OF THE KOREAN SOCIETY OF MECHANICAL ENGINEERS B, 2014, 38 (07) : 557 - 570
  • [7] Application of response surface methodology in describing the thermal performances of a pin-fin heat sink
    Chiang, Ko-Ta
    Chou, Chih-Chung
    Liu, Nun-Ming
    INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2009, 48 (06) : 1196 - 1205
  • [8] Effect of pin fin configuration on thermal performance of plate pin fin heat sinks
    Nilpueng, Kitti
    Mesgarpour, Mehrdad
    Asirvatham, Lazarus Godson
    Ahn, Ho Seon
    Mahian, Omid
    Wongwises, Somchai
    Dalkilic, Ahmet Selim
    CASE STUDIES IN THERMAL ENGINEERING, 2021, 27
  • [9] An experimental study on the thermal and hydraulic performances of nanofluids flow in a miniature circular pin fin heat sink
    Duangthongsuk, Weerapun
    Wongwises, Somchai
    EXPERIMENTAL THERMAL AND FLUID SCIENCE, 2015, 66 : 28 - 35
  • [10] Thermal and hydraulic performance of micro pin fin heat sinks with different pin fin shapes
    Wang, Peng
    Chen, Liang
    2018 THE 6TH INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING, MATERIALS SCIENCE AND CIVIL ENGINEERING, 2019, 542