Investigation of Fresh Concrete and Mechanical Properties of Self-Compacting Concrete with Waste Zinc Admixture

被引:0
|
作者
Kotan, Turkay [1 ]
Ardahanli, Metehan [1 ]
Ozbey, Omer Furkan [2 ]
机构
[1] Erzurum Tekn Univ, Muhendislik & Mimarlik Fak, Insaat Muhendisligi Bolumu, Erzurum, Turkiye
[2] Erzurum Tekn Univ, Fen Bilimleri Enstitusu, Insaat Muhendisligi Anabilim Dali, Erzurum, Turkiye
来源
KONYA JOURNAL OF ENGINEERING SCIENCES | 2023年 / 11卷 / 02期
关键词
Self-compacting Concrete; Waste Zinc Slag; Fresh Concrete Properties; Compressive Strength; COMPRESSIVE STRENGTH; FLY-ASH; SLAG; LEAD;
D O I
10.36306/konjes.1174194
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Self-compacting concrete (SCC) is a special type of concrete that has high workability, does not require vibration and can easily settle in molds where reinforcement density is high. The use of SCCs is becoming more and more widespread in our day, and many studies are being carried out to reduce the cost, especially by reducing the high cement dosage used in this type of concrete. The use of waste products instead of the part of cement, which is the most costly component of concrete, is at the forefront of these studies. In this study, the waste zinc slag powder was used instead of cement at a rate of 5, 7.5 and 10% by weight, and the properties of fresh concrete and compressive strength results at the end of 7 and 28-days of standard curing of the produced SCCs were investigated. As fresh concrete experiments; slump-flow test, V-funnel test, L-box test and U-box test were performed. When the results were examined, it was seen that waste zinc slag powder could improve the fresh concrete properties of SCC, and it was determined that SCC concretes produced by using this material had high strength and compressive strength equivalent to control concrete.
引用
收藏
页数:13
相关论文
共 50 条
  • [21] Investigations on properties of self-compacting concrete modified by fly ashes admixture
    Rudzionis, Z
    Ivanauskas, E
    8TH INTERNATIONAL CONFERENCE ON MODERN BUILDING MATERIALS, STRUCTURES AND TECHNIQUES, 2004, : 151 - 156
  • [22] Modeling Fresh Concrete Pressure of Normal and Self-Compacting Concrete
    Beitzel, Marc
    DESIGN, PRODUCTION AND PLACEMENT OF SELF-CONSOLIDATING CONCRETE: PROCEEDINGS OF SCC2010, MONTREAL, CANADA, SEPTEMBER 26-29, 2010, 2010, 1 : 243 - 254
  • [23] Influence of viscosity agents on fresh properties of self-compacting concrete
    Yamamoto, Masayoshi
    Sakue, Jiro
    Wattanalamlerd, Chalermchai
    Ouchi, Masahiro
    1ST INTERNATIONAL SYMPOSIUM ON DESIGN, PERFORMANCE AND USE OF SELF-CONSOLIDATING CONCRETE, 2005, 42 : 137 - 144
  • [24] A review of the hardened mechanical properties of self-compacting concrete
    Domone, P. L.
    CEMENT & CONCRETE COMPOSITES, 2007, 29 (01): : 1 - 12
  • [25] Evaluation of the influence of the viscosity modifying admixture on the properties of self-compacting concrete
    de Oliveira Evaristo, Wilson Flexeiras
    de Almeida, Victor Ludovico
    Silva Capuzzo, Valdirene Maria
    MATERIA-RIO DE JANEIRO, 2021, 26 (03):
  • [26] Mechanical properties of fiber reinforced self-compacting concrete
    Cai, Jun
    Jiang, Hongdao
    Zhu, Yeran
    Wang, Dong
    OPTOELECTRONICS AND ADVANCED MATERIALS-RAPID COMMUNICATIONS, 2010, 4 (07): : 1013 - 1016
  • [27] Influence of self-compacting concrete fresh properties on bond to reinforcement
    Ioan Pop
    Geert De Schutter
    Pieter Desnerck
    Henriette Szilagy
    Materials and Structures, 2015, 48 : 1875 - 1886
  • [28] Fresh Properties of Self-compacting Concrete with Coarse Recycled Aggregate
    WaichingTang
    PROGRESS IN MATERIALS AND PROCESSES, PTS 1-3, 2013, 602-604 : 938 - 942
  • [29] Microstructural and mechanical characteristics of self-compacting concrete with waste rubber
    Hadzima-Nyarko, Marijana
    Nyarko, Karlo E.
    Djikanovic, Daniela
    Brankovic, Goran
    STRUCTURAL ENGINEERING AND MECHANICS, 2021, 78 (02) : 175 - 186
  • [30] Mechanical Properties of Fiber Reinforced Self-Compacting Concrete
    Long, Wu-Jian
    Lin, Han-Xin
    Chen, Zhen-Rong
    Zhang, Kai-Long
    Wang, Wei-Lun
    MECHANICAL ENGINEERING, MATERIALS SCIENCE AND CIVIL ENGINEERING II, 2014, 470 : 797 - 801