Some Considerations to the Energy Dissipation of Frictionally Stressed Lubricating Greases

被引:0
|
作者
Kuhn, Erik [1 ]
机构
[1] Hamburg Univ Appl Sci, Inst Engn Design & Prod Dev, Tribol Res Ctr TREC, Berliner Tor 21, D-20099 Hamburg, Germany
关键词
lubricating grease; energy dissipation; lubricant wear; entropy production; SELF-ORGANIZATION; SHEAR DEGRADATION;
D O I
10.3390/lubricants13020086
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
The introduction of mechanical energy during a friction process stimulates the system to eliminate this disturbance and find ways for energy dissipation. There are two principal situations: the system is either near equilibrium or far from equilibrium. Near equilibrium, it can be expected that the disturbance will be damped after a certain time, and the system will settle in a stationary state at a level where it began. However, the situation could be entirely different when the system is far from equilibrium. After a phase of instability and crossing a critical parameter, there is a probability of a change in the order level. This means that a new structure will be formed. This paper describes some aspects of the criteria that lead a friction process inside the grease film to instability and examines the influence of different dependencies. In this publication, the dependencies are extended to verify the stability criterion. Finally, the rest phase of a thixotropic experiment is examined from the perspective of potential instability and, thus, the possibility of self-organizing processes occurring.
引用
收藏
页数:8
相关论文
共 50 条
  • [21] On the shear-induced structural degradation of lubricating greases and associated activation energy: An experimental rheological study
    Acar, Nazli
    Franco, Jose M.
    Kuhn, Erik
    TRIBOLOGY INTERNATIONAL, 2020, 144
  • [22] BREAKAGE OF RUBBER-FILLER LINKAGES AND ENERGY DISSIPATION IN STRESSED RUBBER
    BLANCHARD, AF
    JOURNAL OF POLYMER SCIENCE, 1954, 14 (76): : 355 - 374
  • [23] SOME ENERGY CONSIDERATIONS FOR US
    NEHMER, S
    AMERICAN GAS ASSOCIATION MONTHLY, 1972, 54 (11): : 6 - &
  • [24] Some considerations for measuring the collisional dissipation rate of flexible fibers
    Buettner, K. E.
    Guo, Y.
    Curtis, J. S.
    POWDER TECHNOLOGY, 2019, 357 : 360 - 366
  • [25] Energy dissipation of the friction sliding isolation structure with MoS2 as the lubricating material
    Li, Jiangle
    Wang, Sheliang
    Gao, Li
    Hao, Yanzhou
    Zhan, Meng
    ANNALES DE CHIMIE-SCIENCE DES MATERIAUX, 2018, 42 (02): : 303 - 316
  • [26] SOME CONSIDERATIONS ON THE EVALUATION METHOD OF SCORING RESISTANCE OF LUBRICATING OILS BY 4 BALL TEST
    FUJITA, K
    OBATA, F
    JOURNAL OF JAPAN SOCIETY OF LUBRICATION ENGINEERS, 1979, 24 (09): : 573 - 578
  • [27] ENERGY CONSIDERATIONS IN SOME TINI MEMORY MATERIALS
    RINDNER, W
    HOPKINS, JB
    BULLETIN OF THE AMERICAN PHYSICAL SOCIETY, 1970, 15 (11): : 1354 - &
  • [28] Some Considerations on Energy Aspect of the Forced Vibrations
    Pasare, Minodora Maria
    Ianasi, Catalina
    MATERIALE PLASTICE, 2012, 49 (04) : 266 - 269
  • [29] SOME ENERGY AND MOMENTUM CONSIDERATIONS IN THE PERFORATION OF PLATES
    GIERE, AC
    AIAA JOURNAL, 1964, 2 (08) : 1471 - 1472
  • [30] Two temperature theory of initially stressed electro-microstretch medium without energy dissipation
    Renu Yadav
    Kapil Kumar Kalkal
    Sunita Deswal
    Microsystem Technologies, 2017, 23 : 4931 - 4940