Research on NOx Emissions Testing and Optimization Strategies for Diesel Engines Under Low-Load Cycles

Under low-load cycles (LLCs), the issue of high NOx emissions from diesel engines is attracting widespread attention. Through a combination of experimental and simulation approaches, the NOx emission behavior under LLC conditions was investigated. Furthermore, the optimization strategies for reducing NOx emissions was studied based on a dual selective catalytic reduction (SCR) after-treatment system. The results indicate that emissions at load rates below 30% during LLCs account for more than 67.5% of the total cycle emissions, particularly under idling and start-stop conditions. Moreover, it was found that NOx emissions decrease significantly by using a pre-positioned dual SCR after-treatment system. And, the closer the SCR is to the engine, the higher the NOx conversion efficiency becomes. As the SCR's position is adjusted, the rate of NOx removal stabilizes, achieving a maximum reduction in NOx concentration of up to 60.1%.