Transient analysis of stall onset in highly-loaded tandem rotor configurations for an axial compressor

被引:0
|
作者
Kumar, Amit [1 ]
Kumar, Akshay [2 ]
Chhugani, Hitesh [2 ]
Payyappalli, Manas [3 ]
Pradeep, A. M. [2 ]
机构
[1] Tech Univ Denmark, Dept Energy Convers & Storage, Anker Engelunds Vej 1,Bygning 101A, DK-2800 Kongens Lyngby, Denmark
[2] Indian Inst Technol, Dept Aerosp Engn, Mumbai 400076, India
[3] Delft Univ Technol, Fac Aerosp Engn, Kluyverweg 1, NL-2629 HS Delft, Netherlands
关键词
PERFORMANCE; INCEPTION; CASCADE; DESIGN; FLOW;
D O I
10.1063/5.0256513
中图分类号
O3 [力学];
学科分类号
08 ; 0801 ;
摘要
High thrust-to-weight ratio is crucial in aero-engine design. The adverse pressure gradient in compressors limits the maximum diffusion per stage, necessitating more stages to achieve the desired pressure ratio. Tandem airfoils, with their superior diffusion capability compared to conventional single airfoils, can achieve the required pressure ratio with fewer stages. However, the presence of two tip leakage vortices from both the forward and aft rotors creates a more complex tip region compared to conventional rotors. The design and performance aspects of the tandem rotor have been reasonably well documented. However, the stall characteristics of such rotors are yet to be thoroughly investigated. To better understand the stall phenomenon in a tandem rotor, the role of each tip leakage vortex must be investigated separately. Full annulus unsteady analysis of the highly loaded tandem rotor is carried out using the commercially available software Ansys CFX. As the rotor approaches stall, significant changes occur in the trajectory and strength of these vortices, with increased blockage near the stall point. For the tandem rotor, forward rotor spillage is critical. This spillage increases the local incidence near the tip of the forward rotor, resulting in localized flow separation. Small disturbances arising from the leading-edge separation coalesce, forming a rotating stall cell that grows in strength and size as it rotates in the direction opposite to rotor rotation. Even though the aft rotor encounters tip vortex spillage from the forward and aft rotors of the subsequent passage, the nozzle gap effect effectively mitigates flow separation, ensuring stable operation of the tandem rotor system. The leading-edge separation over the forward rotor suction surface evolves into a tornado vortex, with the suction leg on the forward rotor suction surface and the other end connected to the casing. Apart from the tip leakage vortex of the aft rotor, other vortex structures on the aft rotor are intermittent, with some collapsing and new vortices forming.
引用
收藏
页数:20
相关论文
共 50 条
  • [21] A Developed Methodology in Design of Highly Loaded Tandem Axial Flow Compressor Stage
    Eshraghi, H.
    Boroomand, M.
    Tousi, A. M.
    JOURNAL OF APPLIED FLUID MECHANICS, 2016, 9 (01) : 83 - 94
  • [22] Effects of air injection on performance of highly-loaded compressor cascades
    Song, Yanping
    Chen, Huanlong
    Chen, Fu
    Wang, Zhongqi
    Proceedings of the ASME Turbo Expo 2007, Vol 6, Pts A and B, 2007, : 77 - 86
  • [23] Numerical and Experimental Study of Separation Control by Boundary Layer Aspiration in a Highly-Loaded Axial Compressor Cascade
    Mao, X.
    Liu, B.
    Yuan, F.
    JOURNAL OF APPLIED FLUID MECHANICS, 2018, 11 (02) : 433 - 446
  • [24] Rotor-stator interaction in a highly-loaded, single-stage, low-speed axial compressor: Unsteady measurements in the rotor relative frame - Unsteady measurements in the rotor relative frame
    Burkhardt, O
    Nitsche, W
    Goller, M
    Swoboda, M
    Guemmer, V
    Rohkamm, H
    Kosyna, G
    UNSTEADY AERODYNAMICS, AEROACOUSTICS AND AEROELASTICITY OF TURBOMACHINES, 2006, : 603 - +
  • [25] Investigation on slot schemes of highly-loaded aspirated compressor cascade
    Chen, Shao-Wen
    Guo, Shuang
    Chen, Fu
    Wang, Zhong-Qi
    Shiyan Liuti Lixue/Journal of Experiments in Fluid Mechanics, 2010, 24 (05): : 26 - 30
  • [26] Numerical Investigation of Circumferential Groove Casing Treatment in a Highly-Loaded Low-Reaction Transonic Compressor Rotor
    Wei Zhu
    Le Cai
    Songtao Wang
    Zhongqi Wang
    Journal of Thermal Science, 2020, 29 : 916 - 927
  • [27] Numerical Investigation of Circumferential Groove Casing Treatment in a Highly-Loaded Low-Reaction Transonic Compressor Rotor
    ZHU Wei
    CAI Le
    WANG Songtao
    WANG Zhongqi
    Journal of Thermal Science, 2020, 29 (04) : 916 - 927
  • [28] Numerical Investigation of Circumferential Groove Casing Treatment in a Highly-Loaded Low-Reaction Transonic Compressor Rotor
    Zhu Wei
    Cai Le
    Wang Songtao
    Wang Zhongqi
    JOURNAL OF THERMAL SCIENCE, 2020, 29 (04) : 916 - 927
  • [29] The Effect of Variable Stator on Performance of a Highly Loaded Tandem Axial Flow Compressor Stage
    Hamzeh Eshraghi
    Masoud Boroomand
    Abolghasem M.Tousi
    Mohammad Toude Fallah
    Ali Mohammadi
    Journal of Thermal Science, 2016, 25 (03) : 223 - 230
  • [30] Load split design strategy of tandem stators in a highly loaded micro axial compressor
    Mao, Xiaochen
    Lei, Fu
    Wang, Yunyu
    Ding, Zhihua
    Cheng, Hao
    Liu, Bo
    AEROSPACE SCIENCE AND TECHNOLOGY, 2025, 160