A Bicortical Pedicle Screw in the Cephalad Trajectory Is the Best Option for the Fixation of an Osteoporotic Vertebra: A Finite Element Study

被引:0
|
作者
Murata, Akimasa [1 ]
Tsutsui, Shunji [1 ]
Yamamoto, Ei [2 ]
Kozaki, Takuhei [1 ]
Nakanishi, Ryuichiro [1 ]
Yamada, Hiroshi [1 ]
机构
[1] Wakayama Med Univ, Dept Orthopaed Surg, Wakayama, Japan
[2] Kindai Univ, Fac Biol Oriented Sci & Technol, Dept Biomed Engn, Kinokawa, Japan
来源
SPINE SURGERY AND RELATED RESEARCH | 2024年 / 8卷 / 05期
关键词
osteoporosis; pedicle screw; depth; trajectory; finite element analysis; LUMBAR SPINE FUSION; STRENGTH; COMPLICATIONS; INSERTION; DEVICE; LOADS;
D O I
10.22603/ssrr.2023-0249
中图分类号
R61 [外科手术学];
学科分类号
摘要
Introduction: Pedicle screws are commonly used in fixation to treat various spinal disorders. However, screw loosening is a prevalent complication, particularly in patients with osteoporosis. Various biomechanical studies have sought to address this issue, but the optimal depth and trajectory to increase the fixation strength of pedicle screws remain controversial. Therefore, a biomechanical study was conducted using finite element models. Methods: Three-dimensional finite element models of the L3 vertebrae were developed from the preoperative computed tomography images of nine patients with osteoporosis and nine patients without who underwent spine surgery. Unicortical and bicortical pedicle screws were inserted into the center and into the anterior wall of the vertebrae, respectively, in different trajectories in the sagittal plane: straightforward, cephalad, and caudal. Subsequently, three different external loads were applied to each pedicle screw at the entry point: axial pullout, craniocaudal, and lateromedial loads. Nonlinear analysis was conducted to examine the fixation strength of the pedicle screws. Results: Irrespective of osteoporosis, the bicortical pedicle screws had greater fixation strength than the unicortical pedicle screws in all trajectories and external loads. The fixation strength of the bicortical pedicle screws was not substantially different among the trajectories against any external loads in the nonosteoporotic vertebrae. However, the fixation strength of the bicortical pedicle screws against craniocaudal load in the cephalad trajectory was considerably greater than those in the caudal (P=0.016) and straightforward (P=0.023) trajectories in the osteoporotic vertebrae. However, this trend was not Conclusions: Our results indicate that bicortical pedicle screws should be used, regardless of whether the patient has osteoporosis or not. Furthermore, pedicle screws should be inserted in the cephalad trajectory in patients with osteoporosis.
引用
收藏
页码:510 / 517
页数:8
相关论文
共 50 条
  • [1] A bicortical pedicle screw in the caudad trajectory is the best option for the fixation of an osteoporotic vertebra: An in-vitro experimental study using synthetic lumbar osteoporotic bone models
    Shibasaki, Yasuyuki
    Tsutsui, Shunji
    Yamamoto, Ei
    Murakami, Kimihide
    Yoshida, Munehito
    Yamada, Hiroshi
    CLINICAL BIOMECHANICS, 2020, 72 : 150 - 154
  • [2] Impact of Screw Diameter and Length on Pedicle Screw Fixation Strength in Osteoporotic Vertebrae: A Finite Element Analysis
    Matsukawa, Keitaro
    Yato, Yoshiyuki
    Imabayashi, Hideaki
    ASIAN SPINE JOURNAL, 2021, 15 (05) : 566 - 574
  • [3] The benefits of cement augmentation of pedicle screw fixation are increased in Osteoporotic bone: A finite element analysis
    Wang W.
    Baran G.R.
    Garg H.
    Betz R.R.
    Moumene M.
    Cahill P.J.
    Spine Deformity, 2014, 2 (4) : 248 - 259
  • [4] Biomechanical Evaluation of Cortical Bone Trajectory Fixation with Traditional Pedicle Screw in the Lumbar Spine: A Finite Element Study
    Su, Kuo-Chih
    Chen, Kun-Hui
    Pan, Chien-Chou
    Lee, Cheng-Hung
    APPLIED SCIENCES-BASEL, 2021, 11 (22):
  • [5] Sparse Representation for Different Animal Vertebra Classification along the Fixation Trajectory of Pedicle Screw
    Liu, YangYang
    Wang, ZhiQiang
    Wang, Kang
    Qian, ZhiYu
    Gao, Yang
    Li, WeiTao
    JOURNAL OF SPECTROSCOPY, 2020, 2020
  • [6] Biomechanical and finite element analyses of bone cement-Injectable cannulated pedicle screw fixation in osteoporotic bone
    Liu, Yaoyao
    Xu, Jianzhong
    Sun, Dong
    Luo, Fei
    Zhang, Zehua
    Dai, Fei
    JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS, 2016, 104 (05) : 960 - 967
  • [7] EVALUATION AND ANALYSIS OF STRAIN IN THE SCREW HEAD FOR LUMBAR PEDICLE SCREW FIXATION: AN EXPERIMENTAL AND FINITE ELEMENT STUDY
    Rana, Masud
    Majumdar, Sourav
    Jain, Pushpdant
    Malas, Anindya
    Pradhan, Rururaja
    Choudhury, Sandeep
    Biswas, Jayanta Kumar
    INTERNATIONAL JOURNAL FOR MULTISCALE COMPUTATIONAL ENGINEERING, 2021, 19 (02) : 21 - 28
  • [8] EVALUATION AND ANALYSIS OF STRAIN IN THE SCREW HEAD FOR LUMBAR PEDICLE SCREW FIXATION: AN EXPERIMENTAL AND FINITE ELEMENT STUDY
    Rana M.
    Majumdar S.
    Jain P.
    Malas A.
    Pradhan R.
    Choudhury S.
    Biswas J.K.
    International Journal for Multiscale Computational Engineering, 2021, 19 (02): : 21 - 28
  • [9] Measurement of strain in the rod for lumbar pedicle screw fixation: An experimental and finite element study
    Rana, Masud
    Biswas, Jayanta Kumar
    Roy, Sandipan
    Ghosh, Niloy
    Bhattacharya, Shambo
    Karmakar, Santanu Kumar
    Roychowdhury, Amit
    BIOMEDICAL PHYSICS & ENGINEERING EXPRESS, 2020, 6 (06)
  • [10] Individualized prediction of pedicle screw fixation strength - an experimentally validated finite element study
    Widmer, Jonas
    Fasser, Marie-Rosa
    Croci, Eleonora
    Spirig, Jose
    Snedeker, Jess
    Farshad, Mazda
    SWISS MEDICAL WEEKLY, 2019, 149 : 26S - 26S