Ground Fault Detection of Photovoltaic and Energy Storage DC Converter Load on User Side

With the rapid development of DC power supply technology, the operation, maintenance, and fault detection of DC power supply equipment and devices on the user side have become important tasks in power load management. DC/DC converters, as core components of photovoltaic and energy storage DC systems, have issues with detecting ground faults on the positive and negative input/output buses, leading to difficulties in troubleshooting device malfunctions and potentially endangering user safety. To address these issues, a method for detecting ground faults on the positive and negative buses of a synchronous buck photovoltaic and energy storage DC/DC converter is proposed, which involves the comprehensive measurement of multi-point common-mode voltages. This method collects the input positive bus voltage, output positive bus voltage, switch voltage, and the common-mode voltage at the midpoint of the bridge arm, then sums these after removing the switching harmonics. By analyzing the characteristic differences of the summed voltage under the ground fault modes of the positive and negative input/output buses, characteristic parameters are extracted to establish a ground fault identification method, thereby achieving effective detection of ground faults in the photovoltaic and energy storage DC/DC converter. Finally, the effectiveness of the method proposed in this paper was validated through simulations and experiments.