Effect of Cr addition on the microstructure and properties of Cu-15Ni-8Sn alloy

被引：0
|
作者：
Yuan, Mingquan [1 ]
Tang, Kun [1 ]
Guo, Chengjun [1 ,2 ]
Chen, Jinshui [1 ]
Shi, Yufan [1 ]
Yang, Bin [1 ]
机构：
[1] Jiangxi Univ Sci & Technol, Fac Mat Met & Chem, Ganzhou 341000, Peoples R China
[2] Ningbo Changzhen Copper Ind Co Ltd, Ningbo 315400, Peoples R China
来源：
MATERIALS TODAY COMMUNICATIONS | 2025年 / 44卷
基金：
中国国家自然科学基金;
关键词：
Cu-15Ni-8Sn alloy; Cr addition; Discontinuous precipitation; Microstructure and Properties;
D O I：
10.1016/j.mtcomm.2025.111874
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The Cu-15Ni-8Sn alloy has attracted considerable attention as a novel copper-based alloy material. The impact of chromium (Cr) addition on the microstructure and properties of the Cu-15Ni-8Sn alloy were investigated by using optical microscopy (OM), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The results show that the incorporation of Cr reduces the secondary dendrite spacing in as-cast alloys and effectively mitigates dendrite segregation. Additionally, Cr begins to precipitate during the solidification process, forming Cr-rich phases. During the aging process, these Cr phases occupy the nucleation sites of the discontinuous precipitates and impede the movement of their front interfaces, thereby effectively suppressing the formation of discontinuous precipitates. The addition of 0.7 wt% Cr exhibited the most pronounced inhibitory effect, leading to a peak hardness of 357.9 HV, tensile strength of 742.6 MPa, and conductivity of similar to 9.8 % IACS after aging at 450 degrees C for 7 hours.
引用
收藏
页数：9
相关论文
共 50 条
  • [41] Aging behavior of Cu-15Ni-8Sn alloy prepared by mechanical alloying
    Department of Materials Science and Engineering, Zhejiang University, Hangzhou 310027, China
    Trans Nonferrous Met Soc China, 4 (707-711):
  • [42] Ageing behavior of Cu-15Ni-8Sn alloy prepared by mechanical alloying
    郑史烈
    吴进明
    曾跃武
    李志章
    Transactions of Nonferrous Metals Society of China, 1999, (04) : 707 - 711
  • [43] Ageing behavior of Cu-15Ni-8Sn alloy prepared by mechanical alloying
    Zheng, SL
    Wu, JM
    Zeng, YW
    Li, ZZ
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 1999, 9 (04) : 707 - 711
  • [44] A comparative study of Cu-15Ni-8Sn alloy prepared by L-DED and L-PBF: Microstructure and properties
    Wang, Jibing
    Zhou, Xianglin
    Li, Jinghao
    Zhu, Jialei
    Zhang, Mina
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2022, 840
  • [45] RELATIONSHIP BETWEEN MICROSTRUCTURE AND MECHANICAL-PROPERTIES OF A SPINODALLY DECOMPOSING CU-15NI-8SN ALLOY PREPARED BY SPRAY DEPOSITION
    HERMANN, P
    MORRIS, DG
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1994, 25 (07): : 1403 - 1412
  • [46] Spinodal decomposition in a melt-spun Cu-15Ni-8Sn alloy
    Kondo, Shin-ichiro
    Nakashima, Hiromichi
    Morimura, Takao
    PHYSICA B-CONDENSED MATTER, 2019, 560 : 244 - 254
  • [47] On the rolling and annealing texture in a Cu-15Ni-8Sn (wt.%) alloy
    Alili, B.
    Bradai, D.
    Mathon, M. H.
    Jakani, S.
    Baudin, T.
    KOVOVE MATERIALY-METALLIC MATERIALS, 2008, 46 (06): : 371 - 376
  • [48] Microstructure and properties of Cu-15Ni-8Sn-0.4Si alloy
    王艳辉
    汪明朴
    洪斌
    李周
    Transactions of Nonferrous Metals Society of China, 2003, (05) : 1051 - 1055
  • [49] Influence of heat treatments on microstructure and mechanical properties of Cu-15Ni-8Sn prepared by spray forming
    Hermann, P
    Biselli, C
    Morris, DG
    MATERIALS SCIENCE AND TECHNOLOGY, 1997, 13 (06) : 489 - 496
  • [50] Influence of heat treatments on microstructure and mechanical properties of Cu-15Ni-8Sn prepared by spray forming
    Hermann, P.
    Biselli, C.
    Morris, D. G.
    Materials Science and Technology, 13 (06):
12345