Effect of 0.12wt%Sr Addition on Structural, Mechanical and Tribological Properties of Al-12Si+10wt%Zn Alloy

被引：0
|
作者：
Hekimoglu, Ali Pasa [1 ]
Zimitoglu, Sueha [1 ]
Haciosmanoglu, Murat [1 ]
机构：
[1] Recep Tayyip Erdogan Univ, Fac Engn & Architecture, Mech Engn Dept, Rize, Turkiye
来源：
INTERNATIONAL JOURNAL OF METALCASTING | 2025年
关键词：
Al-12Si-based alloy; microstructure; strength properties; friction; wear; DRY SLIDING WEAR; AL-SI-CU; HEAT-TREATMENT; EUTECTIC MODIFICATION; GRAIN-REFINEMENT; ALUMINUM-ALLOYS; AS-CAST; MICROSTRUCTURE; BEHAVIOR; FRICTION;
D O I：
10.1007/s40962-025-01564-0
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
The effects of 0.12wt%Sr additive on some material properties of Al-12Si+10wt%Zn alloy were examined in this study. Al-12Si+10wt%Zn and Al-12Si+10wt%Zn+0.12wt%Sr alloys were manufactured by permanent mold casting. Microstructures of these alloys were examined with both optic and scanning electron microscopes. Phases in the alloys were identified by energy-dispersive spectroscopy and X-ray diffraction analyses. Hardness measurements were performed with the Brinell method. Mechanical and tribological properties of the alloys were investigated with tensile and friction-wear tests, respectively. The microstructure of the Al-12Si+10wt%Zn alloy consists of alpha-Al, eutectic Al-Si mixture, primary Si and beta phases. Al-12Si+10wt%Zn+0.12wt%Sr alloy includes the Al-Zn-Fe-Si and Sr-Al-Si phases in addition to phases observed in the Al-12Si+10wt%Zn alloy. Sr addition resulted in the eutectic silicon particles becoming thinner and a spherical-like shape. The Sr addition to the Al-12Si+10wt%Zn alloy caused the hardness, yield strength and tensile strength to increase from 97 HBN to 138 HBN, 163 MPa to 233 MPa and 215 MPa to 240 MPa, respectively. The addition of Sr also caused coefficient of friction and wear volume of the Al-12Si-10Zn alloy to decrease from 0.5189 to 0.4621 and 4.488 mm3 to 4.025 mm3, respectively. Effects of Sr additive on the material properties of the Al-12Si+10wt%Zn alloy were discussed based on the microstructural changes.
引用
收藏
页数：13
相关论文
共 50 条
  • [41] Structural and Mechanical Evaluation of a Nanocrystalline Al-5 wt %Si Alloy Produced by Mechanical Alloying
    Dayani, Davood
    Shokuhfar, Ali
    Vaezi, Mohammad Reza
    Rezaei, Seyed Reza Jafarpour
    Hosseinpour, Saman
    METALS, 2017, 7 (09)
  • [42] Effect of processing on mechanical properties of an Fe-8.5 wt% Al-1.1 wt% C alloy
    Baligidad, RG
    Prakash, U
    Radhakrishna, A
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1998, 255 (1-2): : 162 - 168
  • [43] Effect of Zn-addition and structural transformation on the creep behaviour of Pb-10 wt.% Sn alloy
    El-Daly, AA
    Abdel-Daiem, AM
    Abdel-Rahman, AN
    Mohammed, SM
    MATERIALS CHEMISTRY AND PHYSICS, 2004, 85 (01) : 163 - 170
  • [44] Investigation of Mechanical and Tribological Properties of Al-7 Wt.% Si alloy Metal Matrix Composites Reinforced with SiC
    Singh, Rahul
    Singh, Abhishek Kr
    Chaurashiya, Pankaj
    Rai, Amrendra
    Singh, Vinay Kumar
    SILICON, 2023, 15 (10) : 4365 - 4374
  • [45] Effect of carbon addition on structure and mechanical properties of electroslag remelted Fe-20 wt% Al alloy
    Baligidad, RG
    Prakash, U
    Krishna, AR
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1998, 249 (1-2): : 97 - 102
  • [46] Response of Mg Addition on the Dendritic Structures and Mechanical Properties of Hypoeutectic Al-10Si (Wt Pct) Alloys
    Ercan Karaköse
    Mehmet Yildiz
    Mustafa Keskin
    Metallurgical and Materials Transactions B, 2016, 47 : 2468 - 2478
  • [47] The effect of Al-5 wt%Ti-0.2 wt%B on the solidification characteristics of 55 wt%Al-Zn-1.6 wt%Si alloy in hot-dip coating
    Peng, Wangjun
    Wu, Guangxin
    Peng, Hao
    Ding, Dejian
    Yu, Yaowei
    Zhang, Jieyu
    SURFACE & COATINGS TECHNOLOGY, 2016, 306 : 378 - 389
  • [48] Effect of Multidirectional Forging and SIMA Process on Mechanical and Tribological Behavior of Hypereutectic Al-18 Wt.% Si Alloy
    Choudhary, Ishwari Narain
    Sinha, Nitesh Kumar
    Mahali, Manik
    Singh, Jayant Kumar
    SILICON, 2023, 15 (17) : 7541 - 7551
  • [49] Response of Mg Addition on the Dendritic Structures and Mechanical Properties of Hypoeutectic Al-10Si (Wt Pct) Alloys
    Karakose, Ercan
    Yildiz, Mehmet
    Keskin, Mustafa
    METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 2016, 47 (04): : 2468 - 2478
  • [50] Effects of TiO2, CuO, and SiO2 nanoparticles addition on the microstructure and mechanical properties of Al-10 wt% Zn alloy
    AbdElRhiem, Eman
    Mostafa, M. M.
    Nada, R. H.
    Mohamed, S. G.
    Barakat, Y. F.
    Abdelaziz, Shereen M.
    PHYSICA SCRIPTA, 2023, 98 (06)
12345