Effect of 0.12wt%Sr Addition on Structural, Mechanical and Tribological Properties of Al-12Si+10wt%Zn Alloy

被引：0
|
作者：
Hekimoglu, Ali Pasa [1 ]
Zimitoglu, Sueha [1 ]
Haciosmanoglu, Murat [1 ]
机构：
[1] Recep Tayyip Erdogan Univ, Fac Engn & Architecture, Mech Engn Dept, Rize, Turkiye
来源：
INTERNATIONAL JOURNAL OF METALCASTING | 2025年
关键词：
Al-12Si-based alloy; microstructure; strength properties; friction; wear; DRY SLIDING WEAR; AL-SI-CU; HEAT-TREATMENT; EUTECTIC MODIFICATION; GRAIN-REFINEMENT; ALUMINUM-ALLOYS; AS-CAST; MICROSTRUCTURE; BEHAVIOR; FRICTION;
D O I：
10.1007/s40962-025-01564-0
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
The effects of 0.12wt%Sr additive on some material properties of Al-12Si+10wt%Zn alloy were examined in this study. Al-12Si+10wt%Zn and Al-12Si+10wt%Zn+0.12wt%Sr alloys were manufactured by permanent mold casting. Microstructures of these alloys were examined with both optic and scanning electron microscopes. Phases in the alloys were identified by energy-dispersive spectroscopy and X-ray diffraction analyses. Hardness measurements were performed with the Brinell method. Mechanical and tribological properties of the alloys were investigated with tensile and friction-wear tests, respectively. The microstructure of the Al-12Si+10wt%Zn alloy consists of alpha-Al, eutectic Al-Si mixture, primary Si and beta phases. Al-12Si+10wt%Zn+0.12wt%Sr alloy includes the Al-Zn-Fe-Si and Sr-Al-Si phases in addition to phases observed in the Al-12Si+10wt%Zn alloy. Sr addition resulted in the eutectic silicon particles becoming thinner and a spherical-like shape. The Sr addition to the Al-12Si+10wt%Zn alloy caused the hardness, yield strength and tensile strength to increase from 97 HBN to 138 HBN, 163 MPa to 233 MPa and 215 MPa to 240 MPa, respectively. The addition of Sr also caused coefficient of friction and wear volume of the Al-12Si-10Zn alloy to decrease from 0.5189 to 0.4621 and 4.488 mm3 to 4.025 mm3, respectively. Effects of Sr additive on the material properties of the Al-12Si+10wt%Zn alloy were discussed based on the microstructural changes.
引用
收藏
页数：13
相关论文
共 50 条
  • [1] Effect of Zn and Cu Addition on Microstructure and Mechanical Properties of Al-10wt%Mg Alloy
    Wang, Xinbiao
    Liu, Shengfa
    Lin, Yaojun
    METALS, 2022, 12 (06)
  • [2] Effect of Zn Addition on the Structural, Mechanical and Tribological Properties of Al12Si (EN AC 44100) Alloy
    Hekimoglu, Ali Pasa
    Sonmezisik, Ahsen
    Zimitoglu, Suha
    Haciosmanoglu, Murat
    Savaskan, Temel
    INTERNATIONAL JOURNAL OF METALCASTING, 2024,
  • [3] Effect of Sr addition on the microstructure of a rapidly solidified Al-12 wt.% Si alloy
    Wang, Y
    Zhang, ZH
    Zheng, SH
    Wang, WM
    Bian, XF
    PRAKTISCHE METALLOGRAPHIE-PRACTICAL METALLOGRAPHY, 2005, 42 (08): : 411 - 422
  • [4] Effect of Cu addition on the microstructure and mechanical properties of Al-30 wt% Zn alloy
    Abd El-Rehim, A. F.
    Sakr, M. S.
    El-Sayed, M. M.
    Abd El-Hafez, M.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2014, 607 : 157 - 162
  • [5] Effect of addition of Al-Si eutectic alloy on microstructure and mechanical properties of Mg-12wt%Li alloy
    Zilong Zhao
    Xuegang Xing
    Jinyu Ma
    Liping Bian
    Wei Liang
    Yide Wang
    JournalofMaterialsScience&Technology, 2018, 34 (09) : 1564 - 1569
  • [6] Effect of addition of Al-Si eutectic alloy on microstructure and mechanical properties of Mg-12wt%Li alloy
    Zhao, Zilong
    Xing, Xuegang
    Ma, Jinyu
    Bian, Liping
    Liang, Wei
    Wang, Yide
    JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2018, 34 (09) : 1564 - 1569
  • [7] Effect of Sr on the Microstructure and Properties of Hypereutectic Al-20 wt% Si Alloy
    Li, Xiaosong
    Cai, Anhui
    Liu, Gang
    Zhou, Yong
    Zeng, Jijie
    ADVANCES IN SUPERALLOYS, PTS 1 AND 2, 2011, 146-147 : 454 - +
  • [8] Structural, mechanical and tribological characterization of Zn25Al alloys with Si and Sr addition
    Vencl, Aleksandar
    Bobic, Ilija
    Vucetic, Filip
    Bobic, Biljana
    Ruzic, Jovana
    MATERIALS & DESIGN, 2014, 64 : 381 - 392
  • [9] Influence of quenching conditions on the mechanical and structural properties of Al-30 wt% Zn alloy
    Abd El-Rehim, A. F.
    El-Sayed, M. M.
    Nagy, M. R.
    Abd El-Hafez, M.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2014, 602 : 105 - 109
  • [10] The Effect of Tin on Microstructure and Properties of the Al-10 wt.% Si Alloy
    Kozana, Janusz
    Pieekos, Marcin
    Garbacz-Klempka, Aldona
    Perek-Nowak, Malgorzata
    MATERIALS, 2022, 15 (18)
12345