Effect of Substrate Surface Roughness on Properties of WC-12Co Coatings Sprayed by High Velocity Oxygen Fuel Spraying on AZ31B Magnesium Alloy

被引：0
|
作者：
Li, Chang [1 ]
Li, Siyu [1 ]
Wang, Xuan [1 ]
Mei, Haohao [1 ]
Han, Xing [1 ]
机构：
[1] Univ Sci & Technol Liaoning, Sch Mech Engn & Automat, Anshan 114051, Liaoning, Peoples R China
来源：
JOURNAL OF THERMAL SPRAY TECHNOLOGY | 2025年
关键词：
AZ31B magnesium alloy; ceramic coating; different roughness; HVOF;
D O I：
10.1007/s11666-025-01980-y
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Magnesium alloy is a lightweight structural material, but commercial AZ31B magnesium alloy has poor wear and corrosion resistance. WC-12Co has high hardness, wear resistance and corrosion resistance. In this paper, WC-12Co coating was prepared on AZ31B substrate by high velocity oxygen fuel (HVOF) spraying technology to improve its comprehensive service performance. Based on the surface of AZ31B magnesium alloy substrate with different roughness, the coating microcharacterization experiment was carried out. The effects of substrate surface roughness on the hardness, adhesion, wear resistance and corrosion resistance of the coating were revealed. The results show that the adhesion between the coating and the substrate and the corrosion resistance of the coating are significantly improved with the increasing surface roughness.
引用
收藏
页数：13
相关论文
共 50 条
  • [41] Effect of processing variables on microstructure and mechanical properties of AZ31B magnesium alloy sheet
    Li, Peng-Xi
    Zhang, Bo-Ping
    Chen, Jing-Yi
    Tu, Yi-Fan
    Cai, Qing-Wu
    Cailiao Rechuli Xuebao/Transactions of Materials and Heat Treatment, 2006, 27 (03): : 60 - 63
  • [42] Effect of heat input on microstructure and properties of welded joint in magnesium alloy AZ31B
    刘黎明
    苗玉刚
    宋刚
    梁国俐
    TransactionsofNonferrousMetalsSocietyofChina, 2004, (01) : 88 - 92
  • [43] Effect of Shot Peening on Mechanical Properties and Ballistic Resistance of Magnesium Alloy AZ31B
    S. Dharani Kumar
    U. Magarajan
    Saurabh S. Kumar
    S. Balasubramani
    Metal Science and Heat Treatment, 2021, 63 : 197 - 202
  • [44] The Effect of GTAW Variants on Tensile and Microstructural Properties of AZ31B Magnesium Alloy Joints
    Subravel, V.
    Padmanaban, G.
    Rajamurugan, T. V.
    Seeman, M.
    Chandrasekaran, V.
    Rajaganapathy, C.
    Lenin, Haiter A.
    ADVANCES IN MATERIALS SCIENCE AND ENGINEERING, 2022, 2022
  • [45] Effect of Shot Peening on Mechanical Properties and Ballistic Resistance of Magnesium Alloy AZ31B
    Kumar, S. Dharani
    Magarajan, U.
    Kumar, Saurabh S.
    Balasubramani, S.
    METAL SCIENCE AND HEAT TREATMENT, 2021, 63 (3-4) : 197 - 202
  • [46] Effect of heat input on microstructure and properties of welded joint in magnesium alloy AZ31B
    Liu, LM
    Miao, YG
    Song, G
    Liang, GL
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2004, 14 (01) : 88 - 92
  • [47] Microstructure and Mechanical Properties of AZ31B Magnesium Alloy via Ultrasonic Surface Rolling Process
    Geng, Jilong
    Yan, Zhifeng
    Zhang, Hongxia
    Liu, Yongquan
    Dong, Peng
    Yuan, Shuo
    Wang, Wenxian
    ADVANCED ENGINEERING MATERIALS, 2021, 23 (09)
  • [48] Surface Roughness Evaluation of AZ31B Magnesium Alloy After Rough Milling Using Tools with Different Geometries
    Zagorski, Ireneusz
    STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING, 2024, 70 (7-8): : 355 - 368
  • [49] Energy Required for Erosive Wear of Cermet Coatings Sprayed Using the High-Velocity Oxygen Fuel Method on a Magnesium Alloy Substrate
    Orynycz, Olga
    Jonda, Ewa
    Kulesza, Ewa
    Latka, Leszek
    Swic, Antoni
    ENERGIES, 2024, 17 (13)
  • [50] Tribological investigation of surface structures processed by high-feed milling on HVOF sprayed WC-12Co coatings
    Tillmann, Wolfgang
    Stangier, Dominic
    Hagen, Leif
    Biermann, Dirk
    Freiburg, Dennis
    Meijer, Alexander
    SURFACE & COATINGS TECHNOLOGY, 2020, 395 (395):
12345