Effect of laser drilling process on combustor liner effusion hole quality

Effusion cooling is one of the significant cooling technologies in combustor liners in terms of cooling efficiency and weight reduction. However, effusion cooling technology is difficult to manufacture. In fact this technology requires laser-drilling of thousands of tiny holes with shallow angles on a sheet metal with a thickness generally varying between 0.5 to 1.5 mm. In addition, the use of thermal barrier coating is common in gas turbine engines and is one more challenge for the drilling process. In order to obtain more efficient gas turbine engines, the inlet temperature keeps increasing in the last decades, which induces the combustion chamber to operate in a hotter environment. Therefore, efficient cooling technology is needed, even if it is hard to manufacture. For laser drilling, several parameters have to be explored to obtain acceptable holes. This study includes the microstructure investigations of the holes produced with different laser parameters and the optimal laser parameters determined according to the microstructure of six different effusion cooling hole configurations. The results show that laser process differences affect the metal substrate microstructure and thermal barrier coating structure. Drilling method, peak power, number of pulses, gas type and pressure value have a significant effect on the hole geometry and its microstructure.