A Model for the Prediction of Frictional Power Losses in Hypoid Gears

被引：2

作者：

Grabovic, Eugeniu ^{[1
]}

Ciulli, Enrico ^{[1
]}

Artoni, Alessio ^{[1
]}

Gabiccini, Marco ^{[1
]}

机构：

[1] Univ Pisa, I-56122 Pisa, PI, Italy

来源：

ADVANCES IN ITALIAN MECHANISM SCIENCE, IFTOMM ITALY 2022 | 2022年 / 122卷

关键词：

LUBRICATION;

D O I：

10.1007/978-3-031-10776-4_26

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

This paper proposes a model for the estimation of the coefficient of friction and the friction-induced power losses in lubricated hypoid gears. A specific hypoid gear set is designed to replicate the one used in an experimental investigation of the efficiency of hypoid gears, available from the literature. Despite the simplicity of our lubrication model, a good agreement with the experimental data is achieved. Additional results obtained through a commercial software that implements the ISO/TR 15144-1 standard are also shown for further comparison.

引用

页码：219 / 228

页数：10

共 50 条

[41] Investigations on the power losses in high speed gears
Diab, Y.
Ville, F.
Velex, P.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, 2006, 220 (J3) : 336 - 336
[42] Optimal tooth modifications in hypoid gears
Simon, V
JOURNAL OF MECHANICAL DESIGN, 2005, 127 (04) : 646 - 655
[43] FEM stress analysis in hypoid gears
Simon, V
MECHANISM AND MACHINE THEORY, 2000, 35 (09) : 1197 - 1220
[44] STUDIES ON LIMITING LOAD FOR SCORING AND FRICTIONAL LOSS OF HYPOID GEARS (MAINLY EFFECTS OF SURFACE TREATMENTS AND LUBRICATING OILS)
HAIZUKA, S
NARUSE, C
NEMOTO, R
BULLETIN OF THE JSME-JAPAN SOCIETY OF MECHANICAL ENGINEERS, 1986, 29 (253): : 2281 - 2289
[45] On optimizing the basic geometry of hypoid gears
Baer, Gert F.
MECHANISM AND MACHINE THEORY, 2016, 104 : 274 - 286
[46] Lapping modification and experiments of hypoid gears
Wei, Bingyang
Yang, Hongbin
Yang, Jianjun
Fang, Zongde
Zhongguo Jixie Gongcheng/China Mechanical Engineering, 2007, 18 (07): : 842 - 845
[47] A vectorization model to closed-form solution for cutting forces prediction during face-hobbing of hypoid gears
Huang, Kaifeng
Yu, Jianwu
Wang, Juxin
Zhang, Chunhui
Wan, Liyou
MECHANISM AND MACHINE THEORY, 2022, 173
[48] Lapping tooth surface micro-topography prediction for extended epicycloid hypoid gears
Wen, Jun
Du, Wenlong
Hou, Jinbo
Rong, Shifeng
Zhou, Zhenyu
Wang, Qiang
Ding, Han
MECHANISM AND MACHINE THEORY, 2025, 206
[49] A genuine face milling cutter geometric model for spiral bevel and hypoid gears
Shuangxi Xie
The International Journal of Advanced Manufacturing Technology, 2013, 67 : 2619 - 2626
[50] A Mathematical Model for the Generated Gear Tooth Surfaces of Spiral bevel and Hypoid gears
Wu, Xuncheng
Han, Jingtao
Wang, Jiafu
ADVANCED MANUFACTURING TECHNOLOGY, PTS 1-3, 2011, 314-316 : 384 - 388

← 1 2 3 4 5 →