Numerical Simulation on the Thermodynamic Equilibrium of Inclusions in the Continuous Casting Bloom

被引:0
|
作者
Yao, Hao [1 ]
Zhang, Yuexin [2 ]
Liu, Chengjun [1 ]
Zhang, Lifeng [2 ]
机构
[1] Northeastern Univ, Sch Met, Shenyang 110819, Peoples R China
[2] North China Univ Technol, Sch Mech & Mat Engn, Beijing 100144, Peoples R China
基金
国家重点研发计划; 中国国家自然科学基金;
关键词
DIFFUSION-GOVERNED SOLIDIFICATION; NONMETALLIC INCLUSIONS; SOLUTE REDISTRIBUTION; SPATIAL-DISTRIBUTION; TERNARY ALLOYS; STEEL; PREDICTION; TRANSPORT; MODEL;
D O I
10.1007/s11663-025-03437-7
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
In the continuous casting process, the phenomena of uneven temperature and element distribution occurred, leading to non-uniform inclusion distribution in the continuous casting bloom. A thermodynamic equilibrium model was established for inclusions in the continuous casting bloom that coupled flow, heat transfer, and mass transfer, to study the thermodynamic equilibrium process between steel and inclusions during continuous casting, facilitating further research on the spatial distribution of inclusions in the continuous casting bloom. The predicted intensities and temperatures align well with the measured ones, and the predicted contents of carbon in the positive segregation at the center and negative segregation beneath the surface align well with the detection results. Carbon, Silicon, Manganese, and Phosphorus exhibit a positive segregation at the center of the continuous casting bloom and a negative segregation at the surface layer of the bloom. The average segregation indices of Carbon, Silicon, Manganese, and Phosphorus at the center of the continuous casting bloom were 1.25, 1.21, 1.09, and 1.47, respectively. Subsequently, the equilibrium contents of the components under the multi-component solidification process within the distribution range of elements were calculated and trained using Fact-sage software and a BP neural network model. Finally, the equilibrium state of steel and inclusions along the entire length of the continuous casting bloom was calculated, the equilibrium contents of [Si], [Al], [S], [Mg], and [Ca] and corresponding equilibrium contents of inclusions at different positions in the continuous casting bloom were obtained. The calculation results indicated that, although the elemental segregation of Al, S, Mg, and Ca was not considered, the equilibrium contents of [Si], [Al], [S], [Mg], and [Ca] and the distribution of equilibrium composition of inclusions in the continuous casting bloom were not uniform.
引用
收藏
页码:1605 / 1616
页数:12
相关论文
共 50 条
  • [41] Numerical Investigation on Motion and Removal of Inclusions in Continuous Casting Tundish with Multiorifice Filter
    Liu, Chang
    Xiao, Aida
    He, Zhu
    Yan, Wen
    Li, Guangqiang
    Wang, Qiang
    STEEL RESEARCH INTERNATIONAL, 2022, 93 (12)
  • [42] Numerical simulations of liquid steel alloying in the three strand continuous casting bloom tundish
    Cwudzinski, A.
    JOINT 5TH INTERNATIONAL CONFERENCE ON ADVANCES IN SOLIDIFICATION PROCESSES (ICASP-5) & 5TH INTERNATIONAL SYMPOSIUM ON CUTTING EDGE OF COMPUTER SIMULATION OF SOLIDIFICATION, CASTING AND REFINING (CSSCR-5), 2019, 529
  • [43] Numerical simulation for collision and aggregation of inclusions in a slab continuous caster
    Lei, Hong
    He, Ji-Cheng
    STEEL RESEARCH INTERNATIONAL, 2007, 78 (09) : 704 - 707
  • [44] Monte-carlo simulation for fractal growth of inclusions in the continuous casting mold
    Lei Hong
    He Jicheng
    ACTA METALLURGICA SINICA, 2008, 44 (06) : 698 - 702
  • [45] Mould taper optimization for continuous casting steels by numerical simulation
    Wang Tongmin
    China Foundry, 2010, 7 (01) : 61 - 67
  • [46] Numerical simulation of alternative horizontal levitation electromagnetic continuous casting
    Zhu, SJ
    Ren, ZM
    Deng, K
    Jiang, GC
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 1996, 6 (04) : 42 - 46
  • [47] Numerical Simulation of Solidification Process During Vertical Continuous Casting
    Wang Z.
    Li B.-K.
    Liu Z.-Q.
    Niu R.
    Dongbei Daxue Xuebao/Journal of Northeastern University, 2020, 41 (09): : 1257 - 1261
  • [48] Mould taper optimization for continuous casting steels by numerical simulation
    Wang Tongmin
    Cai Shaowu
    Li Jun
    Xu Jingjing
    Chen Zongning
    Zhu Jing
    Cao Zhiqiang
    Li Tingju
    CHINA FOUNDRY, 2010, 7 (01) : 61 - 67
  • [49] Numerical simulation of shrinkage porosity defect in billet continuous casting
    Wang, Xingjuan
    Guo, Yinxing
    Xiao, Pengcheng
    Liu, Zengxun
    Zhu, Liguang
    HIGH TEMPERATURE MATERIALS AND PROCESSES, 2023, 42 (01)
  • [50] Numerical Simulation of Macrosegregation in a Continuous Casting Mold with Electromagnetic Stirring
    Kihara, Kengo
    Okada, Nobuhiro
    Saito, Shun
    Kawashima, Kento
    ISIJ INTERNATIONAL, 2022, 62 (09) : 1862 - 1873