Study of anisotropy impact of 2A12 and 7075 dissimilar aluminum alloys FSW joints

被引：0

作者：

Wang, Yongqi ^{[1
]}

Bai, Zhihao ^{[1
]}

Wang, Pengyu ^{[1
]}

Du, Wanting ^{[1
]}

Huang, Rui ^{[1
]}

Tang, Zhengwei ^{[1
]}

Xia, Jiangnan ^{[1
]}

Zhou, Dongshuai ^{[1
]}

Wang, Jian ^{[1
]}

机构：

[1] Jiangsu Univ Technol, Dept Mat & Engn, 1801 Zhongwu St, Changzhou 213001, Peoples R China

来源：

VACUUM | 2025年 / 236卷

基金：

中国国家自然科学基金;

关键词：

Friction stir welding; Anisotropy; Aluminum alloy; Mechanical property; MECHANICAL-PROPERTIES; MICROSTRUCTURE;

D O I：

10.1016/j.vacuum.2025.114173

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The influence of anisotropy on dissimilar aluminum alloy FSW joints were studied by changing the welding direction and advancing side materials. The results show the significant differences in both mechanical properties and microstructure of the welded joints. The 0 degrees 7AS joint has the highest tensile strength (414 MPa), reaching 87 % of the 2A12 aluminum alloys strength. The 0 degrees 7AS joint has the smallest average grain size in the weld nugget, and the best recovery and recrystallization ability. In the HAZ, the strongest texture types of the 0 degrees 7AS and 45 degrees 7AS joints are different. The 0 degrees 7AS joint has the highest texture strength, with a prominent {011} <211> brass texture. This paper provides the guidance for aluminum alloys welding.

引用

页数：5

共 50 条

[41] Investigation of the optimal parameters for butt joints in a friction stir welding (FSW) process with dissimilar aluminium alloys
Harachai, Komsak
Prasomthong, Suriya
MATERIALS RESEARCH EXPRESS, 2023, 10 (02)
[42] Crystal orientation evolution of friction stir welding of 2024/7075 dissimilar aluminum alloys
Zhou, Jun
Zhang, Jin
Ji, Pengfei
Hanjie Xuebao/Transactions of the China Welding Institution, 2016, 37 (08): : 59 - 62
[43] Exfoliation corrosion of friction stir welded dissimilar 2024-to-7075 aluminum alloys
Niu, P. L.
Li, W. Y.
Li, N.
Xu, Y. X.
Chen, D. L.
MATERIALS CHARACTERIZATION, 2019, 147 : 93 - 100
[44] FSW of T joints in overlap configuration: process optimization in joining dissimilar aluminium alloys for the aeronautic application
Ciliberto, S.
Astarita, A.
Squillace, A.
SURFACE AND INTERFACE ANALYSIS, 2013, 45 (10) : 1631 - 1637
[45] Process parameters study on FSW joint of dissimilar metals for aluminum-steel
Chen, Thaiping
JOURNAL OF MATERIALS SCIENCE, 2009, 44 (10) : 2573 - 2580
[46] A study on dissimilar FSW process parameters in aluminum alloy and low carbon steel
Chen, Thaiping
Lin, Wei-Bang
2008 INTERNATIONAL CONFERENCE ON SMART MANUFACTURING APPLICATION, 2008, : 9 - 14
[47] Experimental investigation of hardness of FSW and TIG joints of Aluminium alloys of AA7075 and AA6061
Patil, Chetan
Patil, Hemant
Patil, Hiralal
FRATTURA ED INTEGRITA STRUTTURALE, 2016, 37 (37): : 325 - 332
[48] Effect of Ultrasonic Impact on the Macrostructure and Strength of Dissimilar Aluminum and Titanium Alloys Joints Produced by Friction Stir Welding
A. A. Eliseev
S. A. Ermakova
E. A. Kolubaev
Russian Physics Journal, 2023, 65 : 2210 - 2215
[49] Effect of Ultrasonic Impact on the Macrostructure and Strength of Dissimilar Aluminum and Titanium Alloys Joints Produced by Friction Stir Welding
Eliseev, A. A.
Ermakova, S. A.
Kolubaev, E. A.
RUSSIAN PHYSICS JOURNAL, 2023, 65 (12) : 2210 - 2215
[50] Electrical conductivity field analysis for evaluation of FSW joints in AA6013 and AA7075 alloys
Santos, T. G.
Vilaca, P.
Miranda, R. M.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2011, 211 (02) : 174 - 180

← 1 2 3 4 5 →