Power control of an autonomous wind energy conversion system based on a permanent magnet synchronous generator with integrated pumping storage

被引:1
|
作者
Merahi, Farid [1 ]
Mernache, Hamza [2 ]
Aouzelag, Djamal [3 ]
Badoud, Abd Essalam [1 ]
Bajaj, Mohit [4 ,5 ,6 ]
Zaitsev, Ievgen [7 ,8 ]
机构
[1] Univ Ferhat Abbas Setif 1, Elect Engn Dept, Automat Lab Setif, Maabouda City, Algeria
[2] Univ Bejaia, Fac Technol, Ind & Informat Techol Lab, Bejaia 06000, Algeria
[3] Univ Bejaia, Fac technol, Renewable Energies Mastering Lab, Bejaia 06000, Algeria
[4] Graph Era, Dept Elect Engn, Dehra Dun 248002, India
[5] AL Ahliyya Amman Univ, Hourani Ctr Appl Sci Res, Amman, Jordan
[6] Univ Business & Technol, Coll Engn, Jeddah 21448, Saudi Arabia
[7] Natl Acad Sci Ukraine, Inst Electrodynam, Dept Theoret Elect Engn & Diagnost Elect Equipment, Beresteyskiy 56, UA-03680 Kiev 57, Ukraine
[8] Natl Acad Sci Ukraine, Ctr Informat Analyt & Tech Support Nucl Power Faci, Akad Palladina Ave 34-A, Kyiv, Ukraine
来源
SCIENTIFIC REPORTS | 2024年 / 14卷 / 01期
关键词
Wind energy conversion system; Power control; Permanent magnet synchronous generator (PMSG); Water pumping storage station (WPS); Optimal torque control (OTC); Vector control; Autonomous operation; Isolated site; MATLAB/Simulink;
D O I
10.1038/s41598-024-81522-8
中图分类号
O [数理科学和化学]; P [天文学、地球科学]; Q [生物科学]; N [自然科学总论];
学科分类号
07 ; 0710 ; 09 ;
摘要
Wind energy plays a crucial role as a renewable source for electricity generation, especially in remote or isolated regions without access to the main power grid. The intermittent characteristics of wind energy make it essential to incorporate energy storage solutions to guarantee a consistent power supply. This study introduces the design, modeling, and control mechanisms of a self-sufficient wind energy conversion system (WECS) that utilizes a Permanent magnet synchronous generator (PMSG) in conjunction with a Water pumping storage station (WPS). The system employs Optimal torque control (OTC) to maximize power extraction from the wind turbine, achieving a peak power coefficient (Cp) of 0.43. A vector control strategy is applied to the PMSG, maintaining the DC bus voltage at a regulated 465 V for stable system operation. The integrated WPS operates in both motor and generator modes, depending on the excess or shortfall of generated wind energy relative to load demand. In generator mode, the WPS supplements power when wind speeds are insufficient, while in motor mode, it stores excess energy by pumping water to an upper reservoir. Simulation results, conducted in MATLAB/Simulink, show that the system efficiently tracks maximum power points and regulates key parameters. For instance, the PMSG successfully maintains the reference quadrature current, achieving optimal torque and power output. The system's response under varying wind speeds, with an average wind speed of 8 m/s, demonstrates that the generator speed closely follows turbine speed without a gearbox, leading to efficient power conversion. The results confirm the flexibility and robustness of the control strategies, ensuring continuous power delivery to the load. This makes the system a feasible solution for isolated, off-grid applications, contributing to advancements in renewable energy technologies and autonomous power generation systems.
引用
收藏
页数:32
相关论文
共 50 条
  • [31] POWER CONTROL OF PERMANENT MAGNET SYNCHRONOUS GENERATOR WIND TURBINES
    Acho, Leonardo
    INTERNATIONAL JOURNAL OF POWER AND ENERGY SYSTEMS, 2015, 35 (01): : 14 - 19
  • [32] Maximum power point tracking control of wind energy conversion system driving a permanent magnet synchronous generator: Comparative study
    Elbeji, Omessaad
    Hannachi, Marwa
    Benhamed, Mouna
    Sbita, Lassaad
    WIND ENGINEERING, 2021, 45 (05) : 1072 - 1081
  • [33] A Novel Cascaded Boost Chopper for the Wind Energy Conversion System Based on the Permanent Magnet Synchronous Generator
    Xia, Changliang
    Wang, Zhiqiang
    Shi, Tingna
    Song, Zhanfeng
    IEEE TRANSACTIONS ON ENERGY CONVERSION, 2013, 28 (03) : 512 - 522
  • [34] Sensor Fault Resilient Operation of Permanent Magnet Synchronous Generator Based Wind Energy Conversion System
    Saha, S.
    Haque, M. E.
    Mahmud, M. A.
    Tan, C. P.
    2017 IEEE INDUSTRY APPLICATIONS SOCIETY ANNUAL MEETING, 2017,
  • [35] Diagnosis and Mitigation of Sensor Malfunctioning in a Permanent Magnet Synchronous Generator Based Wind Energy Conversion System
    Saha, Sajeeb
    Haque, Md Enamul
    Mahmud, Md. Apel
    IEEE TRANSACTIONS ON ENERGY CONVERSION, 2018, 33 (03) : 938 - 948
  • [36] A Fault Ride Through Strategy for Wind Energy Conversion System based on Permanent Magnet Synchronous Generator
    Soliman, Mohammed M.
    El-Saady, Gaber
    PROCEEDINGS OF 2018 INTERNATIONAL CONFERENCE ON INNOVATIVE TRENDS IN COMPUTER ENGINEERING (ITCE' 2018), 2018, : 453 - 460
  • [37] Sensor Fault Resilient Operation of Permanent Magnet Synchronous Generator Based Wind Energy Conversion System
    Saha, Sajeeb
    Haque, Md Enamul
    Tan, Chee Pin
    Mahmud, Md Apel
    IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, 2019, 55 (04) : 4298 - 4308
  • [38] Direct Power and Voltage Oriented Control Strategies of Grid-Connected Wind Energy Conversion System Based on Permanent Magnet Synchronous Generator
    Soyed, Abdessami
    Kadri, Ameni
    Hasnaoui, Othman
    Bacha, Faouzi
    CYBERNETICS AND SYSTEMS, 2022, 53 (01) : 103 - 125
  • [39] Grid-integrated permanent magnet synchronous generator based wind energy conversion systems: A technology review
    Tripathi, S. M.
    Tiwari, A. N.
    Singh, Deependra
    RENEWABLE & SUSTAINABLE ENERGY REVIEWS, 2015, 51 : 1288 - 1305
  • [40] Performance of Wind Energy Conversion System using a Permanent Magnet Synchronous Generator for Maximum Power Point Tracking
    Vijayalakshmi, S.
    Kovendan, E.
    Anuradha, C.
    Rattankumar, V.
    2012 INTERNATIONAL CONFERENCE ON EMERGING TRENDS IN ELECTRICAL ENGINEERING AND ENERGY MANAGEMENT (ICETEEEM - 2012), 2012,