Dynamic Analysis of an Excavator using a Robotic Arm Through MATLAB and Adams Simulations

被引：0
|
作者：
Rameshkumar, R. [1 ]
Babu, Bachina Harish [2 ]
Ganesh, P. Ravichandra [3 ]
Ahammed, Syed Riyaz [4 ]
Babu, J.M. [1 ]
Karthik, K. [1 ]
Ramu, Bhargava [5 ]
Elumalai, P.V. [1 ]
机构：
[1] Dept. of Mech. Engg, Vel Tech Rangarajan Dr. Sagunthala R & D Institute of Sci. and Tech, Tamil Nadu, Chennai, India
[2] Dept. of Automobile Engg, VNR Vignana Jyothi Institute of Engg. and Tech, Telangana, Hyderabad, India
[3] Dept. of Mech. Engg, Dr. M.G.R. Educational and Research Institute, Tamil Nadu, Chennai, India
[4] Dept. of Electronics & Communication Engg, NMAM Institute of Tech, Nitte University, Karnataka, Mangalore, India
[5] Dept. of Electrical and Electronics Engg, MLR Institute of Tech, Telangana, Hyderabad, India
来源：
International Journal of Vehicle Structures and Systems | 2024年 / 16卷 / 04期
关键词：
Dynamic loads - Excavators - Lagrange multipliers - Robotic arms - Vibration analysis;
D O I：
10.4273/ijvss.16.4.14
中图分类号：
学科分类号：
摘要：
In a mechanical excavator, the properties of the working device are complex and therefore require a systematic approach. The study of these dynamics typically begins with the mechanical properties of the excavator in the working condition. To break the integrated constraint of the system dynamics, the Lagrange equation is employed, allowing for computation of the maximum dynamic cargo and dynamic cargo measure. These values give a dependable base for determining the necessary structural strength required to safely operate the excavator. This knowledge can assist in optimizing excavator performance and efficiency, ultimately resulting in improved excavator technology and practical applications. © 2024. Carbon Magics Ltd.
引用
收藏
页码：566 / 569
相关论文
共 50 条
  • [1] Vibration Analysis of Dipper Arm Cylinder in an Excavator using MATLAB-Adams Co-simulations
    Rameshkumar, R.
    Ravichandra Ganesh, P.
    Prakash, Kode Jaya
    Ahammed, Syed Riyaz
    Babu, J.M.
    Karthik, K.
    Reddy, Sreenivasa
    International Journal of Vehicle Structures and Systems, 2024, 16 (03) : 442 - 445
  • [2] Kinematics Analysis and Simulation of a Robotic Arm using MATLAB
    Barakat, Alla N.
    Gouda, Khaled A.
    Bozed, Kenz A.
    2016 4TH INTERNATIONAL CONFERENCE ON CONTROL ENGINEERING & INFORMATION TECHNOLOGY (CEIT), 2016,
  • [3] Dynamic characteristics analysis based on ADAMS for general robotic arm of Minimally Invasive Surgical Robot
    Yang, Jing
    Yu, Lingtao
    Wang, Lan
    Wang, Zhengyu
    Zhuang, Zhongping
    2015 IEEE INTERNATIONAL CONFERENCE ON MECHATRONICS AND AUTOMATION, 2015, : 854 - 859
  • [4] Dynamic Properties of Hydraulic Excavator's Simulation and Analysis Based on ADAMS
    Zhao Chunhua
    Chen Shijun
    Zhong Xianyou
    Zhao Meiyun
    Tan Zhongqi
    RECENT TRENDS IN MATERIALS AND MECHANICAL ENGINEERING MATERIALS, MECHATRONICS AND AUTOMATION, PTS 1-3, 2011, 55-57 : 1905 - 1909
  • [5] Kinematic and Dynamic Simulation Analysis of Hydraulic Excavator's Working Equipment based on ADAMS
    Yu, Hong Yan
    Yuan, Ming Hai
    Deng, Kun
    Dong, Rong
    2016 INTERNATIONAL CONFERENCE ON MECHATRONICS, MANUFACTURING AND MATERIALS ENGINEERING (MMME 2016), 2016, 63
  • [6] Human hand tracking using MATLAB to control Arduino based robotic arm
    Lengare, Pankaj S.
    Rane, Milind E.
    2015 INTERNATIONAL CONFERENCE ON PERVASIVE COMPUTING (ICPC), 2015,
  • [7] Robotic Arm Control through Human Arm Movement Detection using Potentiometers
    Mathew, Edwin Basil
    Khanduja, Dushyant
    Sapra, Bhavya
    Bhushan, Bharat
    2015 INTERNATIONAL CONFERENCE ON RECENT DEVELOPMENTS IN CONTROL, AUTOMATION AND POWER ENGINEERING (RDCAPE), 2015, : 298 - 303
  • [8] Modelling of Robotic Single Peg-In-Hole Assembly Using ADAMS/MATLAB Co-simulation
    Nagarajan, P.
    Vigneshwaran, S.
    Yuvaraj, K.
    Ismail, A. Mohammed
    Prabhu, S. Raghavendra
    INTERNATIONAL CONFERENCE ON MECHATRONICS IN ENERGY AND ENVIRONMENT PROTECTION (ICMEEP 2020), 2020, 995
  • [9] Lightweight robotic mobility: template-based modeling for dynamics and controls using ADAMS/Car and MATLAB
    Adamczyk, PG
    Gorsich, D
    Hudas, G
    Overholt, J
    UNMANNED GROUND VEHICLE TECHNOLOGY V, 2003, 5083 : 63 - 74
  • [10] VALIDATION OF THE DYNAMIC MODEL OF THE PLANAR ROBOTIC ARM WITH USING GRAVITY TEST
    Trojanova, Monika
    Cakurda, Tomas
    MM SCIENCE JOURNAL, 2020, 2020 : 4210 - 4215
12345