Roof cutting mechanism of dense drilling in gob-side entry retaining and determination method of key parameters

被引：0
|
作者：
Liu S. [1 ,2 ]
Li X. [1 ]
Zhu W. [3 ]
Fu M. [1 ,2 ]
Zhang D. [4 ]
Peng B. [4 ]
机构：
[1] School of Energy Science and Engineering, Henan Polytechnic University, Jiaozuo
[2] State Collaborative Innovation Center of Coal Work Safety and Clean-efficiency Utilization, Jiaozuo
[3] China Railway Construction Group Co., Ltd., Beijing
[4] Sichuan Chuanmei Huarong Energy Co., Ltd., Chengdu
来源：
Meitan Kexue Jishu/Coal Science and Technology (Peking) | 2024年 / 52卷 / 02期
关键词：
curved triangle plate; dense drilling; gob-side entry retaining; pressure relief by roof cutting; stress concentration between holes;
D O I：
10.12438/cst.2023-1760
中图分类号：
学科分类号：
摘要：
To achieve the safe and stable structural condition of the roof along the goaf under the roof cutting by dense drilling method, the stress distribution and fracture process of the roof strata between normal and dense drilling conditions were studied. Based on rock fracture theory and elastic theory, the stress distribution of the surrounding rock between dense drilling and the fracture process were analyzed before and after mining, clarifying the cutting mechanism of dense drilling and the interaction mechanism of concentrated stress between adjacent drilling. The calculation formula for the tensile-shear stress of the surrounding rock between dense drilling in the arc-shaped triangular panel structure at the end of the working face was derived. Based on this, the influence of different parameters on the tensile-shear stress of the surrounding rock between drilling was analyzed, and a determination method for the key parameters of roof cutting by dense drilling holes along the goaf was proposed. Research has shown that the dense drilling mainly increases the concentration of the surrounding rock's tensile and shear stress by changing the stress conditions around the densely drilled holes before and after mining, causing the expansion and connection of fractures between drilling and forming key rock layers for cutting. Before mining, the drill holes are mainly affected by horizontal compression stress, and after mining, the stress gradually changes to the tensile and shear stress caused by the rotation and subsidence of the goaf roof, and the state of the surrounding rock between the holes transitions from the weakening stage to the formation of crack stage, and then to the fracture stage. The magnitude of the tensile and shear stress of the surrounding rock between the densely drilled holes mainly depends on the thickness of the key rock layer and the ratio of the hole diameter to the hole spacing, and is negatively correlated with the hole height and spacing, and positively correlated with the angle and diameter of the drill holes. Based on this, a method for determining the key parameters of intensive drilling and cutting is proposed, and a plan for intensive drilling and cutting in the goaf with hard roof conditions on the 3124 N working face of Longtan Mine is designed, with a hole length of 8.3 m, an angle of 15°, a hole diameter of 48 mm, and a spacing of 500 mm. The deformation of the goaf roof after cutting is controllable and the overall stability is good, which proves that the arrangement parameters of intensive drilling and cutting are reasonable, and the determination method for the key parameters of roof cutting by dense drilling holes is effective and feasible. © 2024 China Coal Society. All rights reserved.
引用
收藏
页码：23 / 33
页数：10
相关论文
共 27 条
  • [1] CHEN Yong, BAI Jianbiao, ZHU Taolei, Et al., Mechanisms of roadside support in gob-side entry retaining and its application[J], Rock and Soil Mechanics, 33, 5, (2012)
  • [2] HE Manchao, CHEN Shangyuan, GUO Zhibiao, Et al., Control of surrounding rock structure for gob-side entry retaining bycutting roof to release pressure and its engineering application, Journal of China University of Mining & Technology, 46, 5, (2017)
  • [3] HE Manchao, GAO Yubing, YANG Jun, Et al., An energy-gathered roof cutting technique in no-pillar mining and its impact on stress variation in surrounding rocks[J], Chinese Journal of Rock Mechanics and Engineering, 36, 6, (2017)
  • [4] LI Xiaopeng, LIU Shaowei, FU Mengxiong, Et al., Research and application of influencing factors of key parameters of roof cutting and pressure relief by Dense Drilling[J], Coal Science and Technology, 51, 12, (2023)
  • [5] QI Qingxin, LI Yizhe, ZHAO Shankun, Et al., Seventy years development of coal mine rockburst in China:establishment and consideration of theory and technology system[J], Coal Science and Technology, 47, 9, (2019)
  • [6] Jiangwei LIU, LIU Changyou, YAO Qiangling, Mechanisms of crack initiation and propagation in dense linear multihole directional hydraulic fracturing[J], Shock and Vibration, 2019, (2019)
  • [7] LI Dongyin, ZHANG Jingxuan, ZHENG Lijun, Et al., Dense boreholes for weakening bottom layer by cutting roof and pressure relief of gob-side entry retaining[J], Safety in Coal Mines, 53, 7, (2022)
  • [8] ZHOU Fuwei, Research on the technique of guiding gob-side entry formed by advanced roof caving with weaking bore in three-soft coal seam, Xi'an: Xi'an University of Science and Technology, pp. 27-32, (2019)
  • [9] Junqiang MA, Xuehua LI, YAO Qiangling, Et al., Numerical simulation on mechanisms of dense drilling for weakening roofs and its application in roof control[J], Journal of Central South University, 30, 6, (2023)
  • [10] HUI Xindong, Bearing evolution characteristics and stability control of narrow coal pillar in section, Xuzhou:China University of Mining and Technology, pp. 55-57, (2021)
123