Understanding rotor flux behaviour of a multi-megawatt DFIG in wind energy conversion

被引:0
|
作者
Pimple B.B. [1 ]
Babu N.N.V.S. [2 ]
机构
[1] Department of Electrical Engineering, SP College of Engineering, Maharashtra, Mumbai
[2] Department of Electrical and Electronics Engineering, Anurag Univeristy, Telangana, Hyderabad
关键词
DFIG; doubly-fed induction generator; maximum rotor magnetisation; reactive power; rotor flux evaluation; rotor side control;
D O I
10.1504/IJPELEC.2024.136560
中图分类号
学科分类号
摘要
Rotor flux of a doubly-fed induction generator (DFIG) mainly depends on torque developed by the machine and reactive power interaction with the grid. Evaluation of the rotor flux of the machine is critical since lower value results in reactive power consumption from the grid, whereas higher value in unstable operation of the DFIG system. If rotor flux requirement is evaluated beforehand, the machine operation can be made more economical and stable. This paper presents an analytical study for the evaluation of rotor flux of a multi-mega watt DFIG. The analysis is carried out by deriving generalised expressions and rotor flux requirement is evaluated for various operating conditions on a 2 MW machine. Further, a simulation study using rotor voltage vector-based direct torque control (DTC) on the DFIG is carried out in MATLAB Simulink and the analytical results are compared with simulation results. Copyright © 2024 Inderscience Enterprises Ltd.
引用
收藏
页码:152 / 166
页数:14
相关论文
共 50 条
  • [31] Hybrid, Multi-Megawatt HVDC Transformer Topology Comparison for Future Offshore Wind Farms
    Smailes, Michael
    Ng, Chong
    Mckeever, Paul
    Shek, Jonathan
    Theotokatos, Gerasimos
    Abusara, Mohammad
    ENERGIES, 2017, 10 (07):
  • [32] Multi-Megawatt Horizontal Axis Wind Turbine Blade Optimization Based on PSO Method
    Kaviani, Hamid R. R.
    Moshfeghi, Mohammad
    AEROSPACE, 2023, 10 (02)
  • [33] Robust Linear Parameter-Varying Control for Multi-Megawatt Wind Turbine Testing
    Basler, Maximilian
    Hruschka, Felix
    Abel, Dirk
    2021 60TH IEEE CONFERENCE ON DECISION AND CONTROL (CDC), 2021, : 2038 - 2045
  • [34] Structural design of a multi-megawatt wind turbine blade with ONE SHOT BLADE® Technology
    Damiano, M.
    D'Ettore, A.
    SCIENCE OF MAKING TORQUE FROM WIND (TORQUE 2018), 2018, 1037
  • [35] Effects of a Near Wake model on the performance of a Multi-Megawatt wind turbine with an active flap
    Gamberini, A.
    Barlas, T.
    Gonzalez, A. Gomez
    SCIENCE OF MAKING TORQUE FROM WIND, TORQUE 2024, 2024, 2767
  • [36] A Unified Model of DFIG for Simulating Acceleration with Rotor Injection and Harmonics in Wind Energy Conversion Systems
    Fan, Lingling
    Miao, Zhixin
    Yuvarajan, Subbaraya
    2009 IEEE POWER & ENERGY SOCIETY GENERAL MEETING, VOLS 1-8, 2009, : 2887 - +
  • [37] Fatigue Load Mitigation in Multi-megawatt Wind Turbines Using Output Regulation Control
    Mandizadeh, Amin
    Schmid, Robert
    Oetomo, Denny
    2017 21ST INTERNATIONAL CONFERENCE ON SYSTEM THEORY, CONTROL AND COMPUTING (ICSTCC), 2017, : 163 - 168
  • [38] Individual Blade Pitch Control for Extended Fatigue Lifetime of Multi-Megawatt Wind Turbines
    Hoghooghi, H.
    Chokani, N.
    Abhari, R. S.
    SCIENCE OF MAKING TORQUE FROM WIND (TORQUE 2020), PTS 1-5, 2020, 1618
  • [39] Offshore based WARP™ Power Spar buoys for multi-megawatt wind power plants
    Weisbrick, AL
    Rhodes, AF
    PROCEEDINGS OF THE AMERICAN POWER CONFERENCE, VOL. 60, PTS I & II, 1998, : 210 - 215
  • [40] Improved Efficiency of DFIG Wind Energy Conversion Systems by Operating in the Rotor-Tied Configuration
    David, Nicholas
    Aliprantis, Dionysios C.
    2014 INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES (ICEM), 2014, : 189 - 195