The Influencing Factors of Tangential Dressing of Bronze-bond Diamond Grinding Wheel by Picosecond Pulsed Laser

被引：0
|
作者：
Hao M. [1 ,2 ]
Yao P. [1 ,2 ,3 ]
Zhou J. [1 ,2 ]
Li Y. [4 ]
Liang S. [4 ]
Chu D. [1 ,2 ]
Huang C. [5 ]
机构：
[1] Center for Advanced Jet Engineering Technologies (CaJET), School of Mechanical Engineering, Shandong University, Jinan
[2] Key Laboratory of High Efficiency and Clean Mechanical Manufacture of the Ministry of Education, Jinan
[3] Shenzhen Research Institute of Shandong University, Shenzhen
[4] Beijing Institute of Control Engineering, Beijing
[5] School of Mechanical Engineering, Yanshan University, Qinhuangdao
来源：
Jixie Gongcheng Xuebao/Journal of Mechanical Engineering | 2024年 / 60卷 / 09期
关键词：
bronze-bonded diamond grinding wheel; grinding wheel dressing; precision grinding; ultrafast laser;
D O I：
10.3901/JME.2024.09.229
中图分类号：
学科分类号：
摘要：
Bronze-bonded diamond grinding wheel is widely used in the grinding of hard and brittle materials because of its excellent grinding performance and strong wear resistance. In order to improve the grinding performance, this study proposes a picosecond laser dressing study of the bronze-bonded diamond grinding wheel, and laser tangential profiling of the coarse-grained (100 #) bronze-bonded diamond grinding wheel. The power density threshold of laser removing bronze binder and diamond with pulse width of 10 ps is obtained by theoretical calculation. The influences of laser power density, laser scanning speed，grinding wheel speed and offset distance on laser dressing quality are studied, the dressing results of the grinding wheel is evaluated by the surface roughness, relief angle of abrasive grain and the protrusion height of the abrasive grain after dressing. The results show that when the laser power density I40W=2.60×1011 W/cm2, laser scanning speed v=360 mm/min, grinding wheel speed n=9 000 r/min, laser offset distance a=0.5 mm, the diamond grinding wheel surface with higher contour accuracy and better abrasive morphology are obtained. The ultrafast pulsed laser used in this study has extremely high peak power and extremely short pulse width. It can process almost any material, and has the unique advantages of small thermal effect and high machining accuracy. It is expected to achieve higher precision grinding wheel dressing. © 2024 Chinese Mechanical Engineering Society. All rights reserved.
引用
收藏
页码：229 / 240
页数：11
相关论文
共 33 条
  • [21] CAI Song, CHEN Genyu, ZHOU Cong, Et al., Multi-pulse laser dressing the surface metamorphic layer of bronze diamond grinding wheel[J], China Laser, 44, 12, (2017)
  • [22] OKAMOTO Y, OKADA A, KAJITANI A, Et al., High surface quality micro machining of monocrystalline diamond by picosecond pulsed laser[J], CIRP Annals - Manufacturing Technology, 68, 1, pp. 197-200, (2019)
  • [23] CHEN Genyu, ZHOU Xingcai, ZHOU Cong, Et al., Experimental study on radial sharpening and grinding of resin bonded CBN grinding wheel by fiber laser[J], China Laser, 42, 2, (2015)
  • [24] DU Han, CHEN Genyu, ZHOU Cong, Et al., Design of fiber laser on-line shaping diamond grinding wheel detection system[J], Laser Technology, 40, 6, pp. 930-934, (2016)
  • [25] DENG H, CHEN G, Et al., Online，efficient and precision laser profiling of bronze-bonded diamond grinding wheels based on a single-layer deep-cutting intermittent feeding method[J], Optics & Laser Technology, 80, pp. 41-50, (2016)
  • [26] ZHANG C，, GUO B, ZHAO Q, Et al., Ultra-precision grinding of AlON ceramics ： Surface finish and mechanisms[J], Journal of the European Ceramic Society, 39, 13, pp. 3668-3676, (2019)
  • [27] DENG H, ZHOU X., Dressing methods of superabrasive grinding wheels：A review[J], Journal of Manufacturing Processes, 45, pp. 46-69, (2019)
  • [28] DOLD C，, TRANSCHEL R, RABIEY M，, Et al., A study on laser touch dressing of electroplated diamond wheels using pulsed picosecond laser sources[J], CIRP Annals, 60, 1, pp. 363-366, (2011)
  • [29] WALTER C, RABIEY M, WARHANEK M, Et al., Dressing and truing of hybrid bonded CBN grinding tools using a short-pulsed fiber laser[J], CIRP Annals, 61, 1, pp. 279-282, (2012)
  • [30] CHEN G, WEI Y, PENG Y，, Et al., Fiber laser CNC tangential turing V-shaped concave diamond grinding wheel system based on machine vision technology[J], The International Journal of Advanced Manufacturing Technology, 104, 7, pp. 4077-4090, (2019)
1234