Comparative Study on the Performance of Wound Brushless Doubly-fed Machines With Different Slot Ratios

被引：0
|
作者：
Kan, Chaohao [1 ]
Yin, Renjie [1 ]
Zen, Jiale [1 ]
Hu, Zhaowen [2 ]
Yu, Yingang [3 ]
机构：
[1] College of Electrical & Automatic Engineering, Hefei University of Technology, Anhui Province, Hefei,230009, China
[2] School of Mechanical Engineering, Hefei University of Technology, Anhui Province, Hefei,230009, China
[3] Anhui Province Joint Construction Discipline Key Laboratory of High Reliable Power Distribution Technology, Anhui Province, Hefei,230009, China
来源：
Zhongguo Dianji Gongcheng Xuebao/Proceedings of the Chinese Society of Electrical Engineering | 2024年 / 44卷 / 15期
基金：
中国国家自然科学基金;
关键词：
Asynchronous machinery - Machine vibrations - Rotors - Rotors (windings) - Speed regulators - Static Var compensators - Vibration analysis;
D O I：
10.13334/j.0258-8013.pcsee.230859
中图分类号：
学科分类号：
摘要：
Brushless double-fed machines (BDFM) have received a lot of attention in the field of wind power generation due to their simple structure, high reliability and small inverter capacity, etc. The slot ratio of the stator and rotor has a certain degree of influence on the motor performance and vibration. In this paper, the magnetic potential of the stator and rotor of a winding brushless double-fed motor is analyzed as a basis to derive the comparison of the electromagnetic force waves of different slot ratios and the effect of slot ratios on the performance of the motor, three options of slot ratios are given to meet the requirements, and the rotor winding harmonics of each option are calculated for analysis and comparison. The finite element method is used to study the load performance of 48/36 slot, 42/36 slot and 36/30 slot solutions under the same requirements. And the electromagnetic force of the stator tooth is derived to analyze and compare the vibration response of the motor. Finally, the prototype is tested to verify the correctness of the finite element simulation. At the same time, the test results also prove that the motor equipped with the selected slot exhibits minimal vibration, low rotor current, high system output voltage and low saturation level. ©2024 Chin.Soc.for Elec.Eng.
引用
收藏
页码：6199 / 6208
相关论文
共 50 条
  • [41] Reactive Power Regulating of a Wound Rotor Brushless Doubly-Fed Motor
    Kong, Ming
    Wang, Xuefan
    2016 19TH INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES AND SYSTEMS (ICEMS 2016), 2016,
  • [42] Development of Amplitude Equations Model and Assessment of Performance Limits for Brushless Doubly-Fed Reluctance Machines
    Moazen, Maryam
    ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, 2023, 48 (11) : 15271 - 15282
  • [43] Development of Amplitude Equations Model and Assessment of Performance Limits for Brushless Doubly-Fed Reluctance Machines
    Maryam Moazen
    Arabian Journal for Science and Engineering, 2023, 48 : 15271 - 15282
  • [44] Simulation study of brushless doubly-fed machine (BDFM)
    Kuczek, Klaudia
    Plis, Danuta
    PRZEGLAD ELEKTROTECHNICZNY, 2018, 94 (01): : 65 - 68
  • [45] Reduction of Slot Harmonics in a Brushless Doubly-Fed Machine by Using the Tooth Notching
    Xiong, Fei
    Xu, Wei
    Liu, Yi
    Xia, Shengfen
    2017 20TH INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES AND SYSTEMS (ICEMS), 2017,
  • [46] A Comparison of the Brushless Doubly-Fed Generator with Different Rotor Structures
    Jia, Lei
    Yang, Xuejiao
    2016 19TH INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES AND SYSTEMS (ICEMS 2016), 2016,
  • [47] A Study of Rotor Eccentricities Effects on Brushless Doubly Fed Machines Performance
    Abdi, S.
    Abdi, E.
    McMahon, R. A.
    2015 IEEE INTERNATIONAL ELECTRIC MACHINES & DRIVES CONFERENCE (IEMDC), 2015, : 66 - 71
  • [48] Performance Analysis of Brushless Doubly Fed Reluctance Machines
    Taluo, Taufik
    Ristic, Leposava
    Jovanovic, Milutin
    2019 20TH INTERNATIONAL SYMPOSIUM ON POWER ELECTRONICS (EE), 2019,
  • [49] Performance of Brushless Doubly-Fed Synchronous Generator with Hybrid Rotor
    Zhang, Fengge
    Song, Shuang
    Jia, Guanglong
    Jin, Shi
    2013 INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES AND SYSTEMS (ICEMS), 2013, : 695 - 698
  • [50] PERFORMANCE SIMULATION OF BRUSHLESS DOUBLY-FED ADJUSTABLE SPEED DRIVES
    SPEE, R
    WALLACE, AK
    LAUW, HK
    CONFERENCE RECORD OF THE 1989 IEEE INDUSTRY APPLICATIONS SOCIETY ANNUAL MEETING, PTS 1-2, 1989, : 738 - 743
12345