Effect of Alloying Elements and Heat Treatment on Mechanical Properties of Low-Alloy Steels

被引：0
|
作者：
Gaidar, S.M. [1 ]
Vetrova, S.M. [1 ]
Barchukova, A.S. [1 ]
机构：
[1] Russian State Agrarian University—Moscow Agricultural Academy named after K.A. Timiryazev, Moscow,127550, Russia
来源：
Steel in Translation | 2024年 / 54卷 / 11期
关键词：
Abrasion - Agricultural robots - Alloying - Brinell Hardness - Corrosion resistance - Corrosion resistant alloys - High-strength low-alloy steel - Presses (machine tools);
D O I：
10.3103/S0967091224702000
中图分类号：
学科分类号：
摘要：
Abstract: The analyzes of domestic and foreign steels used for the manufacture of agricultural machinery parts has been carried out. It is shown that the reliability of domestic steels is significantly lower, which leads to high abrasive and corrosive wear. For effective tillage, it is necessary to ensure the strength of steels at least 1580–2000 MPa instead of 930–980 MPa, the hardness of the steels should be about 1000 HV. The results of a comparative assessment of the wear resistance of steel samples in an abrasive medium relative to the standard (Steel 45) and their corrosion resistance are presented. © Allerton Press, Inc. 2024.
引用
收藏
页码：1098 / 1101
页数：3
相关论文
共 50 条
  • [21] EFFECT OF HYDROGEN ON THE PROPERTIES OF LOW-ALLOY STEELS
    HOBSON, JD
    SYKES, C
    JOURNAL OF THE IRON AND STEEL INSTITUTE, 1951, 169 (03): : 209 - &
  • [22] EFFECT OF ALLOYING ELEMENTS ON THE SSC RESISTANCE OF LOW-ALLOY STEEL
    SHIMADA, T
    ISHIZAWA, Y
    TANIMURA, M
    ONO, T
    JOURNAL OF METALS, 1983, 35 (12): : 48 - 48
  • [23] TEMPERING PROPERTIES OF LOW-ALLOY STEELS .2. MECHANICAL-PROPERTIES AND MICROSTRUCTURES OF LOW-ALLOY STEELS ON RAPID TEMPERING
    OHTANI, H
    TSUMURA, T
    TRANSACTIONS OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1982, 22 (09) : B284 - B284
  • [24] CHARACTERIZATION OF THE EFFECT OF ALLOYING ELEMENTS ON THE FRACTURE-TOUGHNESS OF HIGH-STRENGTH, LOW-ALLOY STEELS
    KLASSEN, RJ
    BASSIM, MN
    BAYOUMI, MR
    WILSDORF, HGF
    MATERIALS SCIENCE AND ENGINEERING, 1986, 80 (01): : 25 - 35
  • [25] EFFECT OF MINOR ALLOYING ELEMENTS ON PITTING RESISTANCE OF SOME HIGH-STRENGTH LOW-ALLOY STEELS
    ABDULAZIM, A
    ABDULHADI, Z
    METWALLY, W
    MARIE, A
    ANNALI DI CHIMICA, 1993, 83 (11-12) : 529 - 536
  • [26] Influence of mechanical properties and alloying elements of low carbon steels on fine blanking and heat treatment processes response
    Chiavazza, T.
    Marnier, M.
    Achille, A.
    Woimbee, V
    Even, D.
    Colasse, C.
    Osmond, D.
    Eve, S.
    Hug, E.
    19TH INTERNATIONAL CONFERENCE ON METAL FORMING, MF 2022, 2022, 1270
  • [27] EFFECT OF DEOXIDATION PRACTICE ON PROPERTIES OF LOW-ALLOY HEAT-RESISTING STEELS
    KEPKA, M
    KLETECKA, Z
    KOSTOHRYS, M
    STEEL IN THE USSR, 1975, 5 (06): : 311 - 315
  • [28] Effect of Chemical Composition and Structure on Mechanical Properties of Low-Alloy Weldable Steels After Thermomechanical Treatment
    Goritskii, V. M.
    Shneiderov, G. R.
    Guseva, I. A.
    METALLURGIST, 2016, 60 (5-6) : 511 - 518
  • [29] Effect of Chemical Composition and Structure on Mechanical Properties of Low-Alloy Weldable Steels After Thermomechanical Treatment
    V. M. Goritskii
    G. R. Shneiderov
    I. A. Guseva
    Metallurgist, 2016, 60 : 511 - 518
  • [30] MECHANICAL PROPERTIES OF LOW-CARBON LOW-ALLOY BAINITIC STEELS
    OHMORI, Y
    OHTANI, H
    KUNITAKE, T
    TRANSACTIONS OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1972, 12 (02) : 146 - &
12345