Numerical analysis of thermal process in continuous drive radial friction welding

被引：0
|
作者：
秦国梁 [1 ]
梁永亮 [1 ]
耿培皓 [1 ]
王严 [1 ]
周军 [2 ]
机构：
[1] MOE Key Laboratory for Liquid-Solid Structural Evolution and Processing of Materials,and Institute of Materials Joining,Shandong University
[2] Harbin Welding
来源：
China Welding | 2015年 / 24卷 / 01期
关键词：
D O I：
暂无
中图分类号：
TG453.9 [];
学科分类号：
摘要：
A heat source model for radial friction welding was proposed,which was determined by friction pressure,friction coefficient,material properties and extrusion speed of material.A 3D model was established to analyze the continuous drive radial friction welding temperature field of 45 steel pipe.The influences of friction pressure,friction time and rotation speed on the temperature of the friction interface were analyzed.The results showed that the temperature on the friction interface rapidly rose to a peak temperature in initial friction stage and kept constant in the stable friction stage.Welding parameters of friction pressure,friction time and rotation speed had few influences on the peak temperature,while the increase of friction pressure and rotation speed could shorten the time to reach the peak temperature.
引用
收藏
页码：18 / 24
页数：7
相关论文
共 50 条
  • [31] DIMENSIONAL ANALYSIS OF THERMAL FIELDS SURROUNDING FRICTION STIR WELDING PROCESS
    Payton, Lewis N.
    Chandrasekaran, Vishnu Vardhan
    Hunko, Wesley S.
    PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2014, VOL 2B, 2014,
  • [32] THERMAL MAPPING OF THE FRICTION STIR WELDING PROCESS
    Payton, Lewis N.
    Kandaswaamy, Sakthivael
    PROCEEDINGS OF THE ASME INTERNATIONAL MANUFACTURING SCIENCE AND ENGINEERING CONFERENCE, VOL 2, 2009, : 25 - 31
  • [33] 3D numerical analysis of material flow behavior and flash formation of 45# steel in continuous drive friction welding
    Ji Shu-de
    Liu Jian-guang
    Yue Yu-mei
    Lu Zan
    Fu Li
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2012, 22 : S528 - S533
  • [34] Parameter design and analysis in continuous drive friction welding of Al6061/SiCp composites
    R. Adalarasan
    A. Shanmuga Sundaram
    Journal of Mechanical Science and Technology, 2015, 29 : 769 - 776
  • [35] Parameter design and analysis in continuous drive friction welding of Al6061/SiCp composites
    Adalarasan, R.
    Sundaram, A. Shanmuga
    JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2015, 29 (02) : 769 - 776
  • [36] Numerical Solution of the Aluminium Plate Welding Process by Friction Stir Welding
    Janco, Roland
    Ecsi, Ladislav
    Elesztos, Pavel
    VEHICLE AND AUTOMOTIVE ENGINEERING 4, VAE2022, 2023, : 925 - 932
  • [37] Process Mechanics in Friction Stir Welding of Magnesium Alloys: Experimental and Numerical Analysis
    Buffa, Gianluca
    Fratini, Liven
    Gnibl, Tobias
    Wieland, Michael
    Merklein, Marion
    MATERIAL FORMING - ESAFORM 2012, PTS 1 & 2, 2012, 504-506 : 735 - +
  • [38] Numerical analysis of reverse dual-rotation friction stir welding process
    石磊
    武传松
    刘会杰
    China Welding, 2013, 22 (04) : 30 - 35
  • [39] NUMERICAL ANALYSIS OF FRICTION INFLUENCE ON THE TRANSVERSE WELDING PHENOMENON IN THE FORWARD EXTRUSION PROCESS
    Piwnik, Jan
    Mogielnicki, Krzysztof
    Kuprianowicz, Jerzy
    JOURNAL OF THEORETICAL AND APPLIED MECHANICS, 2014, 52 (02) : 547 - 555
  • [40] Numerical analysis of friction influence on the transverse welding phenomenon in the forward extrusion process
    Piwnik, Jan
    Mogielnicki, Krzysztof
    Kuprianowicz, Jerzy
    Journal of Theoretical and Applied Mechanics (Poland), 2014, 52 (02): : 547 - 555
12345