Numerical analysis of thermal process in continuous drive radial friction welding

被引：0
|
作者：
秦国梁 [1 ]
梁永亮 [1 ]
耿培皓 [1 ]
王严 [1 ]
周军 [2 ]
机构：
[1] MOE Key Laboratory for Liquid-Solid Structural Evolution and Processing of Materials,and Institute of Materials Joining,Shandong University
[2] Harbin Welding
来源：
China Welding | 2015年 / 24卷 / 01期
关键词：
D O I：
暂无
中图分类号：
TG453.9 [];
学科分类号：
摘要：
A heat source model for radial friction welding was proposed,which was determined by friction pressure,friction coefficient,material properties and extrusion speed of material.A 3D model was established to analyze the continuous drive radial friction welding temperature field of 45 steel pipe.The influences of friction pressure,friction time and rotation speed on the temperature of the friction interface were analyzed.The results showed that the temperature on the friction interface rapidly rose to a peak temperature in initial friction stage and kept constant in the stable friction stage.Welding parameters of friction pressure,friction time and rotation speed had few influences on the peak temperature,while the increase of friction pressure and rotation speed could shorten the time to reach the peak temperature.
引用
收藏
页码：18 / 24
页数：7
相关论文
共 50 条
  • [1] Numerical analysis of thermal process in continuous drive radial friction welding
    Qin, Guoliang
    Liang, Yongliang
    Geng, Peihao
    Wang, Yan
    Zhou, Jun
    China Welding (English Edition), 2015, 24 (01): : 18 - 24
  • [2] A study of the mechanisms involved in initial friction process of continuous drive friction welding
    Li, Peng
    Li, Jinglong
    Li, Xun
    Xiong, Jiangtao
    Zhang, Fusheng
    Liang, Li
    JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 2015, 29 (12) : 1246 - 1257
  • [3] Numerical analysis of friction stir welding process
    R. K. Uyyuru
    Satish V. Kailas
    Journal of Materials Engineering and Performance, 2006, 15 : 505 - 518
  • [4] Numerical Analysis of Friction Stir Welding Process
    Uyyuru, R. K.
    Kailas, Satish V.
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2013, 22 (10) : 2921 - 2934
  • [5] Numerical analysis of friction stir welding process
    Uyyuru, R. K.
    Kailas, Satish V.
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2006, 15 (05) : 505 - 518
  • [6] Numerical Analysis of Friction Stir Welding Process
    Journal of Materials Engineering and Performance, 2013, 22 : 2921 - 2934
  • [7] Experimental and numerical studies of the effects of process parameters in the continuous friction welding process
    Mousavi, S. A. A. Akbari
    Kefishami, A. Rahbar
    ADVANCED WELDING AND MICRO JOINING / PACKAGING FOR THE 21ST CENTURY, 2008, 580-582 : 335 - 338
  • [8] Experimental and numerical study of thermal process in friction stir welding
    Xu, JD
    Vaze, SR
    Ritter, RJ
    Colligan, KJ
    Pickens, JR
    Joining of Advanced and Specialty Materials VI, 2004, : 10 - 19
  • [9] THERMAL-MECHANICAL NUMERICAL MODELING OF THE FRICTION ELEMENT WELDING PROCESS
    Varma, Ankit
    Absar, Saheem
    Zhao, Xin
    Choi, Hongseok
    Abke, Tim
    Skovron, Jamie D.
    Ruszkiewicz, Brandt J.
    Mears, Laine
    PROCEEDINGS OF THE ASME 13TH INTERNATIONAL MANUFACTURING SCIENCE AND ENGINEERING CONFERENCE, 2018, VOL 2, 2018,
  • [10] ROLE OF MECHANICAL DRIVE IN FRICTION WELDING PROCESS
    VOINOV, VP
    BOLDYREV, RN
    WELDING PRODUCTION, 1974, 21 (01): : 58 - 61
12345