Mechanism of end-wall fence in controlling secondary flow of compressor cascade

被引:0
|
作者
Liu, Yan-Ming [1 ]
Zhong, Jing-Jun [2 ]
Huang, Hong-Yan [3 ]
Wang, Song-Tao [3 ]
Feng, Guo-Tai [3 ]
机构
[1] School of Energy and Dynamic Engineering, Beijing University of Aeronautics and Astronautics, Beijing 100083, China
[2] School of Electromechanics and Materials Engineering, Dalian Maritime University, Dalian 116026, China
[3] School of Energy Science and Engineering, Harbin Institute of Technology, Harbin 150001, China
来源
关键词
Compressors - Computer simulation - Energy dissipation - Navier Stokes equations - Viscous flow;
D O I
暂无
中图分类号
学科分类号
摘要
The numerical simulation has been carried out on 3D viscous flowfield in CDA (controlled diffusion airfoils) compressor cascade with and without endwall fences on different streamwise locations and different geometrical parameters. The results show that endwall fence can control secondary flow by decreasing the influx of pressure side of horse vortex into passage vortex and forming reversed fence vortex. The optimal fence is located in the foreside of the passage, about 30% pitch far away from the pressure surface, with the height of 1/3 incoming boundary layer thickness and the length of 3/4 axial chord.
引用
收藏
页码:431 / 436
相关论文
共 50 条
  • [21] Effects of Double Vortex Generator Jets on End-Wall Flow Control in High Speed Compressor Cascade under Different Angles of Attack
    Chen C.
    Liu H.-P.
    Chen F.
    Song Y.-P.
    Wang Y.-B.
    Tuijin Jishu/Journal of Propulsion Technology, 2017, 38 (11): : 2504 - 2511
  • [22] Combined flow control with full-span slot and end-wall boundary layer suction in a large-camber compressor cascade
    Wang, Hejian
    Mao, Xiaochen
    Liu, Bo
    Qing, Yanshan
    AEROSPACE SCIENCE AND TECHNOLOGY, 2021, 119
  • [23] Effect of end-wall roughness on performance of transonic axial compressor
    Li, Zhihui
    Liu, Yanming
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART G-JOURNAL OF AEROSPACE ENGINEERING, 2017, 231 (07) : 1213 - 1224
  • [24] END-WALL SECONDARY FLOW CONTROL USING ENGINEERED RESIDUAL SURFACE STRUCTURE
    Miao, X.
    Zhang, Q.
    Atkin, C.
    Sun, Z.
    PROCEEDINGS OF THE ASME TURBO EXPO: TURBINE TECHNICAL CONFERENCE AND EXPOSITION, 2016, VOL 2B, 2016,
  • [25] END-WALL AND PROFILE LOSSES IN A LOW-SPEED AXIAL-FLOW COMPRESSOR ROTOR
    LAKSHMINARAYANA, B
    SITARAM, N
    ZHANG, J
    JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME, 1986, 108 (01): : 22 - 31
  • [26] Numerical Investigation on the Response of End-Wall Flow to Inlet Total Pressure Distortion in Axial Compressor
    Kuang Y.
    Wang Z.
    Li Y.
    Xi G.
    Hsi-An Chiao Tung Ta Hsueh/Journal of Xi'an Jiaotong University, 2020, 54 (05): : 53 - 60
  • [27] Secondary flow control using endwall jet fence in a high-speed compressor cascade
    Huaping Liu
    Shuai Jiang
    Yongchuan Yu
    Dongfei Zhang
    Huanlong Chen
    Journal of Mechanical Science and Technology, 2017, 31 : 4841 - 4852
  • [28] Secondary flow control using endwall jet fence in a high-speed compressor cascade
    Liu, Huaping
    Jiang, Shuai
    Yu, Yongchuan
    Zhang, Dongfei
    Chen, Huanlong
    JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2017, 31 (10) : 4841 - 4852
  • [29] END-WALL AND PROFILE LOSSES IN A LOW-SPEED AXIAL FLOW COMPRESSOR ROTOR.
    Lakshminarayana, B.
    Sitaram, N.
    Zhang, J.
    Journal of Engineering for Gas Turbines and Power, 1986, 108 (01) : 22 - 31
  • [30] Experimental test of a compressor cascade with non-axisymmetric end-wall contouring at off-design conditions
    Qiang, Xiaoqing
    Li, Jian
    Ma, Yuchen
    APPLIED THERMAL ENGINEERING, 2024, 240