Surface alloying of Ti6Al4V alloy by pulsed laser

被引：0

作者：

Zambon, A. ^{[1
]}

Ramous, E. ^{[1
]}

Bianco, M. ^{[1
]}

Rivela, C. ^{[1
]}

机构：

[1] Universita di Padova, Padova, Italy

来源：

Materials Science Forum | 1994年 / 163-6卷 / pt 1期

关键词：

Alloying - Carburizing - Hardness testing - Laser pulses - Neodymium lasers - Nitriding - Surface properties - Surface testing - Surface treatment - Titanium metallography - Wear resistance - X ray analysis;

D O I：

10.4028/www.scientific.net/msf.163-165.411

中图分类号：

学科分类号：

摘要：

The feasibility of gas surface alloying of Titanium alloys by laser has been already studied. However relevant difficulties in the aforesaid process result in surface chemical heterogeneity and roughness. We tried to overcome these problems by optimizing the nitriding and carburizing treatments with a pulsed Nd-YAG laser. Treated samples were examined by metallographic techniques, XRD and by hardness and roughness tests. Results showed that carburized layers exhibit better properties compared with nitrided ones, both as hardness profiles and surface roughness. Preliminary wear tests confirmed the better behaviour of carburized layers.

引用

页码：411 / 416

共 50 条

[41] SURFACE MODIFICATIONS OF A Ti6AL4V IMPLANT/ALLOY BY A PICOSECOND Nd:YAG LASER
Trtica, M. S.
Gakovic, B.
Radak, B.
Maravic, D.
Batani, D.
Desai, T.
24TH SUMMER SCHOOL AND INTERNATIONAL SYMPOSIUM ON THE PHYSICS OF IONIZED GASES, CONTRIBUTED PAPERS, 2008, (84): : 227 - +
[42] Laser surface nitriding of Ti6Al4V alloy coupled with an external stress field
Xuan, Fu-Zhen
Cao, Li-Qin
Wang, Zhengdong
Tu, Shan-Tung
JOURNAL OF MATERIALS RESEARCH, 2010, 25 (02) : 344 - 349
[43] SURFACE ROUGHNESS OF Ti6Al4V ALLOY PRODUCED BY LASER POWDER BED FUSION
Liovic, David
Franulovic, Marina
Ferlic, Luka
Gubeljak, Nenad
FACTA UNIVERSITATIS-SERIES MECHANICAL ENGINEERING, 2024, 22 (01) : 63 - 76
[44] Study on Surface Roughness Improvement of Selective Laser Melted Ti6Al4V Alloy
Wang, Di
Lv, Jiale
Wei, Xiongmian
Lu, Dong
Chen, Chen
CRYSTALS, 2023, 13 (02)
[45] Influence of Surface Pre-treatments on Laser Welding of Ti6Al4V Alloy
J. M. Sánchez-Amaya
M. R. Amaya-Vázquez
L. González-Rovira
M. Botana-Galvin
F. J. Botana
Journal of Materials Engineering and Performance, 2014, 23 : 1568 - 1575
[46] Effect of Surface Texture on the Adhesion Performance of Laser Treated Ti6Al4V Alloy
Maressa, Pietro
Anodio, Luca
Bernasconi, Andrea
Demir, Ali Goekhan
Previtali, Barbara
JOURNAL OF ADHESION, 2015, 91 (07): : 518 - 537
[47] Surface Modification of Ti6Al4V Alloy by Pack Boriding
Atar, Erdem
Kayali, E. Sabri
Cimenoglu, Huseyin
TMS 2009 138TH ANNUAL MEETING & EXHIBITION - SUPPLEMENTAL PROCEEDINGS, VOL 3: GENERAL PAPER SELECTIONS, 2009, : 601 - +
[48] Predictive Modeling of the Ti6Al4V Alloy Surface Roughness
Tsourveloudis, Nikos C.
JOURNAL OF INTELLIGENT & ROBOTIC SYSTEMS, 2010, 60 (3-4) : 513 - 530
[49] Surface Modifications to the Ti6Al4V Alloy for Improvement as Biomaterial
Flores-Alvarez, J. F.
Rodriguez-Gomez, F. J.
Onofre-Bustamante, E.
XXXII NATIONAL CONGRESS OF THE MEXICAN SOCIETY OF ELECTROCHEMISTRY/10TH MEETING OF THE ECS MEXICAN SECTION, 2018, 84 (01): : 15 - 27
[50] Influence of Surface Pre-treatments on Laser Welding of Ti6Al4V Alloy
Sanchez-Amaya, J. M.
Amaya-Vazquez, M. R.
Gonzalez-Rovira, L.
Botana-Galvin, M.
Botana, F. J.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2014, 23 (05) : 1568 - 1575

← 1 2 3 4 5 →