ECONOMIC MEASUREMENT OF ALLOY POURING TEMPERATURES WITH EXPENDABLE THERMOCOUPLE TIPS.

被引：0
|
作者：
Kusiak, Joseph W.
机构：
来源：
Industrial Heating | 1974年 / 41卷 / 02期
关键词：
THERMOCOUPLES;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Utilizing expendable sensing tips in induction melting furnaces, has reduced the cost per temperature reading by 60%. Quality control is also improved, since pouring at too high a temperature produces porosity; low temperatures cause misruns.
引用
收藏
页码：46 / 47
相关论文
共 45 条
  • [31] Measurement of damping performance of M2052 alloy at cryogenic temperatures
    Tanji, T. (tanji@hagi.t.u-tokyo.ac.jp), 1600, Elsevier Ltd (355): : 1 - 2
  • [32] Effects of Pouring and Mold Temperatures on the Fluidity and Hot Tearing Susceptibility of Al-3.5Si-0.5Mg-0.4Cu Alloy
    Zou, GuoTong
    Zhang, HengHua
    Yang, YiTao
    Lu, FuMin
    Yu, ZhongTu
    Wang, Chenjun
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2020, 73 (10) : 2511 - 2517
  • [33] Measurement of electrical conductivity of Zn50Se50 alloy at different temperatures
    Kishore, V.
    Saxena, N. S.
    Saraswat, Vibhav K.
    Sharma, Kanan Bala
    Sharma, T. P.
    JOURNAL OF OPTOELECTRONICS AND ADVANCED MATERIALS, 2006, 8 (04): : 1641 - 1642
  • [34] Effects of Pouring and Mold Temperatures on the Fluidity and Hot Tearing Susceptibility of Al–3.5Si–0.5Mg–0.4Cu Alloy
    GuoTong Zou
    HengHua Zhang
    YiTao Yang
    FuMin Lu
    ZhongTu Yu
    Chenjun Wang
    Transactions of the Indian Institute of Metals, 2020, 73 : 2511 - 2517
  • [35] In-situ measurement of near-surface fretting contact temperatures in an aluminum alloy
    Szolwinski, MP
    Harish, G
    Farris, TN
    Sakagami, T
    JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, 1999, 121 (01): : 11 - 19
  • [36] HEAT TREATMENT T4 AND T6 EFFECTS ON MECHANICAL PROPERTIES IN AL-CU ALLOY AFTER REMELT WITH DIFFERENT POURING TEMPERATURES
    Iswanto, P. T.
    Akhyar
    Pambekti, A.
    METALURGIJA, 2020, 59 (02): : 171 - 174
  • [37] MEASUREMENT OF THE THERMAL EXPANSION COEFFICIENT OF AN Al-Mg ALLOY AT ULTRA-LOW TEMPERATURES
    Bassan, M.
    Buonomo, B.
    Cavallari, G.
    Coccia, E.
    D'Antonio, S.
    Fafone, V.
    Foggetta, L. G.
    Ligi, C.
    Marini, A.
    Mazzitelli, G.
    Modestino, G.
    Pizzella, G.
    Quintieri, L.
    Ronga, F.
    Valente, P.
    INTERNATIONAL JOURNAL OF MODERN PHYSICS B, 2013, 27 (22):
  • [38] OPTICAL MEASUREMENT OF THE MAGNESIUM ALLOY AZ31B STRAIN DISTRIBUTION AT THE HIGHER TEMPERATURES
    Belkova, Monika
    Solfronk, Pavel
    METAL 2016: 25TH ANNIVERSARY INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS, 2016, : 1351 - 1356
  • [39] MEASUREMENT OF THE VARIATION OF MECHANICAL PROPERTIES WITH AGING TEMPERATURES FOR SAND CAST Cu-5Ni-5Sn ALLOY
    Ilangovan, S.
    Sellamuthu, R.
    JOURNAL OF ENGINEERING SCIENCE AND TECHNOLOGY, 2016, 11 (11) : 1609 - 1619
  • [40] High Strain Rate Stress-Strain Measurement of SAC105 Leadfree Alloy at Temperatures up to 200°C
    Lall, Pradeep
    Yadav, Vikas
    Suhling, Jeff
    Locker, David
    2016 15TH IEEE INTERSOCIETY CONFERENCE ON THERMAL AND THERMOMECHANICAL PHENOMENA IN ELECTRONIC SYSTEMS (ITHERM), 2016, : 1225 - 1235
12345