FLOWS IN A CURVED RECTANGULAR CHANNEL (2ND REPORT, VELOCITY MEASUREMENTS IN THE DEVELOPING REGION OF LAMINAR FLOW BY USING LDV.

被引：0

作者：

Sugiyama, Shiro

Yamamoto, Masaaki

Hayashi, Taro

机构：

来源：

Nippon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B | 1987年 / 53卷 / 487期

关键词：

FLUID MECHANICS - VELOCIMETERS - Laser Doppler;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

An experimental investigation is carried out. The fully developed steady laminar flow in the entrance region of a curved rectangular channel is studied under the velocity profile of Poiseuille flow at the inlet and the Dean number is 220. The channel has an aspect ratio of 2 and a curvature ratio of 8. The axial velocity and the radial component of the secondary velocity are measured by using a laser doppler velocimeter (LDV) at 15 sections from the inlet ( theta equals 0 degree ) to the outlet ( theta equals 270 degree ) of the channel. The developing secondary flow is clearly presented and is in good agreement with the results obtained from a flow visualization carried out by the authors.

引用

页码：750 / 756

共 50 条

[41] SHOCK PHENOMENA IN A ONE-COMPONENT TWO-PHASE BUBBLY FLOW (2ND REPORT, PRESSURE RISE AND PROPAGATION VELOCITY OF PRESSURE WAVES).
Fujii, Terushige
Akagawa, Koji
Tsubokura, Sadao
Matsushita, Hajime
Nippon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B, 1987, 53 (495): : 3193 - 3198
[42] Simultaneous measurements of three velocity components by a flying hot-wire method using an X-array hot-wire probe (2nd report, calibration technique and its application to a flow field downstream of a vortex generator)
Shiino, Toshikazu
Yamamoto, Keiichi
Shizawa, Takaaki
Honami, Shinji
Nippon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B, 1995, 61 (592): : 109 - 115
[43] EXPERIMENTAL INVESTIGATION ON HEAT TRANSFER CHARACTERISTICS OF THE SEPARATED FLOW REGION IN DIFFUSERS. (2ND REPORT: EXPERIMENTS BY AIR FLOW IN A TWO-DIMENSIONAL UNILATERALLY DIVERGING DIFFUSER).
Wakisaka, Nobuaki
Senpaku Gijutsu Kenkyusho Hokoku/Papers of Ship Research Institute, 1985, 22 (03): : 155 - 188
[44] PRODUCTION OF FULLY DEVELOPED PIPE FLOW USING PERFORATED PLATES (2ND REPORT, EFFECT OF RECTIFYING DEVICE ON ORIFICE FLOWMETER ACCURACY).
Kado, Hisayoshi
Fujiwara, Yoshiki
Hosokawa, Yoshinobu
Morikawa, Yoshinobu
Nippon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B, 1986, 52 (477): : 2094 - 2099
[45] IN-SITU TESTS USING CRACK-DETECTOR WITH ROTATING PROBES FOR MEASURING SONIC VELOCITY (2ND REPORT) - STUDIES ON CRACK DISTRIBUTION AND SONIC VELOCITY CHANGE IN ROCKS (3RD REPORT).
Sugimoto, Fumio
Furuzumi, Mitsumasa
Nihon Kogyokaishi, 1987, 103 (1198): : 829 - 834
[46] Design and performance of quick opening shock tube using rubber membrane (2nd report, modification of the facility and analysis of shock tube flow)
Yang, J.
Meguro, T.
Onodera, O.
Takayama, K.
Nippon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B, 1995, 61 (591): : 4031 - 4038
[47] Natural convection heat transfer in an inclined rectangular enclosure with two stratified fluid layer (2nd report. Experimental study of heat transfer in boundary layer type flow)
Kimura, Teruo
Takeuchi, Masanori
Tanaka, Kazunori
Nippon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B, 1988, 54 (504): : 2075 - 2082
[48] NUMERICAL COMPUTATION OF UNSTEADY LAMINAR BOUNDARY LAYERS WITH SEPARATION USING ONE-PARAMETER INTEGRAL METHOD. (2ND REPORT, THE SEPARATION SINGULARITY IN UNSTEADY BOUNDARY LAYER).
Matsushita, Michinori
Akamatsu, Teruaki
Bulletin of the JSME, 1985, 28 (240): : 1044 - 1049
[49] Measurement and visualization of a two-dimensional velocity distribution by laser speckle photography using a He-Ne gas laser (2nd report. The application to the coaxial cylindrical Couette flow and the measuring accuracy of the two-dimensional velocity field)
Narumi, Akira
Kashiwagi, Takao
Sato, Kouji
Sakata, Masanori
Nippon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B, 1988, 54 (504): : 1994 - 2001
[50] EXPERIMENTAL STUDY ON A COMPACT METHANOL-FUELED REFORMER WITH HEAT REGENERATION USING CERAMIC HONEYCOMB (2ND REPORT: REACTION REGION DETECTION BY A POSITIVE ION CURRENT PROBE)
Rai, Yasuhiro
Kogame, Hideyuki
Tatsumi, Kazuya
Nakabe, Kazuyoshi
PROCEEDINGS OF THE ASME POWER CONFERENCE - 2011, VOL 1, 2012, : 147 - 152

← 1 2 3 4 5 →