EXAMINATION OF MECHANICAL TESTS FOR RESISTANCE SPOT WELDED LOW CARBON STEEL SHEET.

被引：0
|
作者：
Dinsdale, W.O.
Johnson, K.I.
机构：
来源：
Welding Research International | 1975年 / 5卷 / 01期
关键词：
D O I：
暂无
中图分类号：
学科分类号：
摘要：
An impact tensile-shear test has been developed for use on resistance spot welded sheet specimens. Test results have been compared with those obtained using conventional static tensile-shear and cross-tension tests on single spot welds in 1. 2mm mild steel sheet. A 55% reduction in weld diameter from the normally recommended value reduced the static tensile-shear strength by only 18%, while the estimated energy for failure was reduced by 81%. The implications of the results obtained are discussed and it is considered that further work must be conducted before spot welded assemblies can be used with confidence where impact conditions are met with in service. Refs.
引用
收藏
页码：91 / 105
相关论文
共 50 条
  • [21] Dependence of overload performance on weld attributes for resistance spot welded galvanized low carbon steel
    Goodarzi, M.
    Marashi, S. P. H.
    Pouranvari, M.
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2009, 209 (09) : 4379 - 4384
  • [22] FAILURE BEHAVIOUR OF RESISTANCE SPOT WELDED LOW CARBON STEEL IN TENSILE-SHEAR AND COACH-PEEL TESTS: A COMPARATIVE STUDY
    Pouranvari, Majid
    Marashi, Pirooz
    METALLURGICAL & MATERIALS ENGINEERING-ASSOCIATION OF METALLURGICAL ENGINEERS OF SERBIA, 2009, 15 (03): : 149 - 157
  • [23] Mechanical properties characterization of resistance spot welded DP1000 steel under uniaxial tensile tests
    Javaheri, Ehsan
    Pittner, Andreas
    Graf, Beniamin
    Rethmeier, Michael
    MATERIALS TESTING, 2019, 61 (06) : 527 - 532
  • [24] FLEXURAL TESTS ON CONCRETE BEAMS EXTERNALLY REINFORCED BY STEEL SHEET.
    Solomon, S.K.
    Gopalani, L.K.
    1600, (53):
  • [25] An experimental study of resistance spot welding in 1 mm thick sheet of low carbon steel
    De, A
    Gupta, OP
    Dorn, L
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 1996, 210 (04) : 341 - 347
  • [26] Experimental study of resistance spot welding in 1 mm thick sheet of low carbon steel
    Indian Inst of Technology, Kharagpur, India
    Proc Inst Mech Eng Part B J Eng Manuf, B4 (341-347):
  • [27] Weldability and Fracture Behaviour of Low Carbon Steel/Aluminium/Stainless Steel Clad Sheet with Resistance Spot Welding
    Siva Prasad Murugan
    Muralimohan Cheepu
    Dae-Geun Nam
    Yeong-Do Park
    Transactions of the Indian Institute of Metals, 2017, 70 : 759 - 768
  • [28] Weldability and Fracture Behaviour of Low Carbon Steel/Aluminium/Stainless Steel Clad Sheet with Resistance Spot Welding
    Murugan, Siva Prasad
    Cheepu, Muralimohan
    Nam, Dae-Geun
    Park, Yeong-Do
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2017, 70 (03) : 759 - 768
  • [29] Effects of welding parameters on the quality of resistance spot welded SAE 1010 steel sheet
    Bayramoglu, M
    Esme, U
    Geren, N
    INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY, 2003, 19 (05): : 362 - 373
  • [30] Mechanic parameters analysis of spot welded low carbon steel structure
    Wang X.
    Li X.
    Chen S.
    Yu H.
    Li X.
    Hanjie Xuebao/Transactions of the China Welding Institution, 2018, 39 (03): : 107 - 111
12345