K-450-130 STEAM TURBINE FOR THE PGU-800 COMBINED-CYCLE POWER PLANT.

被引：0

作者：

Nezhentsev, Yu.N. ^{[1
]}

Muravko, Yu.S. ^{[1
]}

Tsvetkov, A.M. ^{[1
]}

机构：

[1] Lenigrad Metal Working Plant, Leningrad, USSR, Lenigrad Metal Working Plant, Leningrad, USSR

来源：

Thermal Engineering (English translation of Teploenergetika) | 1987年 / 34卷 / 08期

关键词：

Fuel economy - POWER PLANTS - Gas and Steam Turbine Combined;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

Leningrad Metal working Plant have developed the engineering design for the K-450-130 steam turbine for the 800 MW combined-cycle steam turbine-gas turbine power plant (PGU-800). It is intended that the PGH-800 will be installed at large central power stations working on natural gas. This will enable substantial reductions to be made in specific fuel consumption and capital costs. The technical requirements imposed on the K-450-130 steam turbine result from the features of its operation in the PGU-800 plant. The steam turbine must be of high efficiency and cover both base load operation with 7000 h use per year and also semi-peak load operation with up to 3500 h use per year.

引用

页码：409 / 413

共 50 条

[31] ANALYSIS OF STEAM TURBINE INSTABILITIES OF A 100 MW COMBINED CYCLE POWER PLANT
Becerra Villanueva, Jose A.
Jimenez-Espadafor Aguilar, Francisco J.
Carvajal Trujillo, Elisa
PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION - 2010, VOL 8, PTS A AND B, 2012, : 11 - 19
[32] Heat characteristics of V94.2 gas-turbine units operating at the PGU-450T combined-cycle plant of the North-West cogeneration plant of St. Petersburg
Malakhov S.V.
Ol'khovskii G.G.
Trushechkin V.P.
Khomichenko V.N.
Power Technology and Engineering, 2004, 38 (3) : 151 - 158
[33] Thermoeconomic analysis of a solar dish micro gas-turbine combined-cycle power plant
Aichmayer, L.
Spelling, J.
Laumert, B.
INTERNATIONAL CONFERENCE ON CONCENTRATING SOLAR POWER AND CHEMICAL ENERGY SYSTEMS, SOLARPACES 2014, 2015, 69 : 1089 - 1099
[34] Optimization and the effect of steam turbine outlet quality on the output power of a combined cycle power plant
Ganjehkaviri, A.
Jaafar, M. N. Mohd
Hosseini, S. E.
ENERGY CONVERSION AND MANAGEMENT, 2015, 89 : 231 - 243
[35] PGU-230 steam-gas unit design for combined cycle operation at the Heller thermal power plant
Davydov A.V.
Radin Yu.A.
Il'In M.N.
Orlov M.V.
Andrianov Yu.F.
Mishustin N.I.
Lebedev A.S.
Lisyanskii A.S.
Obukhov S.G.
Guyash F.
Power Technology and Engineering, 2010, 44 (03) : 220 - 226
[36] Effectiveness of Large Power Reduction for a Combined-Cycle Power Plant with Several Gas Turbines and One Steam Turbine and Some of the Shutdown Equipment Used as Hot Reserve
Radin Y.A.
Gombolevskii V.I.
Smyshlyaev V.B.
Rudenko D.V.
Power Technology and Engineering, 2018, 52 (01) : 69 - 73
[37] Optimization of start-up process in combined cycle steam turbine of a power plant
Ding, Y. (dyj1987214@126.com), 1600, Chinese Society for Electrical Engineering (33):
[38] Development of a combined cycle gas turbine/steam plant for training marine and power engineers
Sarnacki, W. Peter
Kimball, Richard
Fleck, Barbara
PROCEEDINGS OF THE ASME TURBO EXPO, VOL 3, 2007, : 535 - 544
[39] IMPROVEMENT OF PRIMARY FREQUENCY CONTROL WITH PARTICIPATION OF STEAM TURBINE COMBINED CYCLE POWER PLANT
Esmaeili, Karim
Ramezani, Amin
Momeni, H. R.
2017 25TH IRANIAN CONFERENCE ON ELECTRICAL ENGINEERING (ICEE), 2017, : 691 - 696
[40] Minimum-cost product mix - Prefabrication of steam turbine rotors for combined-cycle power plants (Siemens Power Generation)
Mutzke, H
WHAT DOES THE PROCESS COST US?: PRACTICAL APPLICATION OF PROCESS COST ACCOUNTING, 2001, 1609 : 81 - 91

← 1 2 3 4 5 →