Roller Burnishing.

被引：0
|
作者：
Finkelnburg, Hans H.
机构：
来源：
TZ fuer Praktische Metallbearbeitung | 1976年 / 70卷 / 01期
关键词：
D O I：
暂无
中图分类号：
TG [金属学与金属工艺];
学科分类号：
0805 ;
摘要：
Roller burnishing is a noncutting forming operation specially developed for smoothing of surfaces, particularly those of spindles, pins, and other tip cylinders. The characteristics of this operation performed with the aid of a fully automatic 5-station roller burnishing machine are described in detail.
引用
收藏
页码：9 / 12
相关论文
共 50 条
  • [41] Improvement in the Scratch Resistance of Polymers by Roller Burnishing Process
    Low, K. O.
    El-Tayeb, N. S. M.
    Brevern, P. V.
    INTERNATIONAL POLYMER PROCESSING, 2010, 25 (03) : 176 - 180
  • [42] Analysis of the Inconel 718 properties after roller burnishing
    Casarin, Samuel José
    de Godoi, Eduardo Luiz
    de Angelo Sanchez, Luiz Eduardo
    de Alcântara, Anne Caroline Melo
    Gonçalves, Aparecido Carlos
    International Journal of Machining and Machinability of Materials, 2022, 24 (06) : 466 - 490
  • [43] SELECTION OF PARAMETERS IN THE HARDENING OF SHAFTS BY ROLLER-BURNISHING
    KUDRYAVTSEV, IV
    SOVIET ENGINEERING RESEARCH, 1983, 3 (04): : 3 - 4
  • [44] ROLLER-BURNISHING CRANKSHAFT FILLETS WITH CORRECTION OF DISTORTION
    KHUDOBIN, DV
    EMELYANO.VN
    RUSSIAN ENGINEERING JOURNAL-USSR, 1970, 50 (01): : 52 - &
  • [45] Investigation of roller burnishing process on aluminium 63400 material
    John, M. R. Stalin
    Vinayagam, B. K.
    AUSTRALIAN JOURNAL OF MECHANICAL ENGINEERING, 2011, 8 (01) : 47 - 54
  • [46] SELECTION OF PARAMETERS IN THE HARDENING OF SHAFTS BY ROLLER-BURNISHING.
    Kudryavtsev, I.V.
    1600, (03):
  • [47] Roller Burnishing of Particle Reinforced Aluminium Matrix Composites
    Nestler, Andreas
    Schubert, Andreas
    METALS, 2018, 8 (02):
  • [48] Assessment of the Depth of the Deformed Layer in the Roller Burnishing Process
    M. Kowalik
    T. Mazur
    T. Trzepiecinski
    Strength of Materials, 2018, 50 : 493 - 503
  • [49] Influence of roller - burnishing on surface roughness parameters and roundness
    Gorog, Augustin
    Gorogova, Ingrid
    Stancekova, Dana
    Janota, Miroslav
    INNOVATIVE TECHNOLOGIES IN ENGINEERING PRODUCTION (ITEP'18), 2018, 244
  • [50] Effect of roller burnishing on pure aluminum alloyed by copper
    Al-Qawabeha, Ubeidulla F.
    Al-Qawabah, Safwan M.
    INDUSTRIAL LUBRICATION AND TRIBOLOGY, 2013, 65 (02) : 71 - 77
12345