Numerical simulation of fluid flow and heat transfer during mold filling for die casting

被引：0

作者：

Jia, L.R. ^{[1
]}

Xiong, S.M. ^{[1
]}

Feng, W.M. ^{[1
]}

Liu, B.C. ^{[1
]}

机构：

[1] Dep. of Mechanical Eng., Tsinghua Univ., Beijing 100084, China

来源：

Qinghua Daxue Xuebao/Journal of Tsinghua University | 2001年 / 41卷 / 02期

关键词：

Computer simulation - Filling - Heat transfer - Molds - Turbulent flow;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

A mathematical model was developed for simulating the fluid flow and heat transfer phenomena during mold filling for die casting by using the finite difference method. A computational program was developed based on the SOLA-VOF algorithm. The model was verified by numerically simulating the filling of a S-shaped cavity with either laminar flow or turbulent flow. The simulation results show that the turbulent model is more accurate for high-pressure die casting as compared with benchmark test results. Finally, the filling of a complicated 3-D die casting component was simulated with a 'transient surface layer' concept proposed to describe the temperature distribution in the die after the filling process.

引用

页码：8 / 11

共 50 条

[11] Numerical simulation on influence of pouring velocity on flow field of casting during mold-filling
Southeast University, Nanjing 210018, China
Zhuzao, 2007, 11 (1190-1194):
[12] Numerical simulation on the mold filling of impeller casting during suction pouring
Sun, Xun
An, Geying
Wang, Junqing
Jixie Gongcheng Xuebao/Chinese Journal of Mechanical Engineering, 2000, 36 (01): : 63 - 66
[13] Numerical simulation of melt flow and heat transfer in casting filling process based on SPH
Chen, Chen
Sun, Yu
COMPUTERS & FLUIDS, 2024, 280
[14] NUMERICAL SIMULATION OF EMEBR ON FLUID FLOW, HEAT TRANSFER AND INCLUSIONS REMOVING DURING CONTINUOUS CASTING CASTER
Wu, Suzhou
Li, Zhizheng
Xue, Zhengliang
METALURGIA INTERNATIONAL, 2011, 16 (02): : 21 - 29
[15] Observation of Air Entrapment during Mold Filling of Die Casting Using Water Model Experiment for Mold Filling Simulation
Niida, Atsushi
Maeda, Yasuhiro
MATERIALS TRANSACTIONS, 2020, 61 (07) : 1364 - 1368
[16] NUMERICAL SIMULATION OF CASTING'S MOLD FILLING PROCESS
J.X. Zhou
Acta Metallurgica Sinica(English Letters), 2005, (06) : 724 - 730
[17] THE MODELING OF FLUID-FLOW AND HEAT-TRANSFER IN MOLD FILLING
MISHIMA, S
SZEKELY, J
ISIJ INTERNATIONAL, 1989, 29 (04) : 324 - 332
[18] Numerical simulation of filling process in die casting
Li, YB
Zhou, W
MATERIALS TECHNOLOGY, 2003, 18 (01) : 36 - 41
[19] Numerical Simulation of Initial Development of Fluid Flow and Heat Transfer in Planar Flow Casting Process
Liu, Heping
Chen, Wenzhi
Qiu, Shengtao
Liu, Guodong
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 2009, 40 (03): : 411 - 429
[20] Numerical Simulation of Initial Development of Fluid Flow and Heat Transfer in Planar Flow Casting Process
Heping Liu
Wenzhi Chen
Shengtao Qiu
Guodong Liu
Metallurgical and Materials Transactions B, 2009, 40 : 411 - 429

← 1 2 3 4 5 →