Effect of nonuniform inlet flow distribution on suction performance of centrifugal pumps (1st report, experimental results)

被引:0
|
作者
Tanaka, Sadashi
Mase, Masahiro
Ueyama, Toshiharu
Sudou, Sumio
机构
关键词
Cavitation; -; Pumps--Inlets;
D O I
暂无
中图分类号
学科分类号
摘要
The flow in various types of suction casings of multi-stage centrifugal pumps is investigated experimentally, and is compared with the suction performance. The results show that the symmetrical bend type casing has poor suction performance because of distorted inflows at the impeller inlet section, while better suction performance is obtained from the volute type casing which has fairly good flow distribution. It is clarified that the suction performance is affected by the velocity distortion, especially in the circumferential direction, and the incipient cavitation is related with the local incidence angle of the impeller blade.
引用
收藏
页码:1693 / 1697
相关论文
共 50 条
  • [1] PERFORMANCE OF CENTRIFUGAL PUMPS AT LOW REYNOLDS NUMBER (1st REPORT, EXPERIMENTAL STUDY).
    Tanaka, Kazuhiro
    Ohashi, Hideo
    Nippon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B, 1984, 50 (449): : 279 - 285
  • [2] STUDY OF ALLOWABLE PIPING LOADS ON DOUBLE-SUCTION CENTRIFUGAL PUMPS (1ST REPORT, CASING STRESS DISTRIBUTION PRODUCED BY PIPING LOADS WITH ADDED INTERNAL PRESSURE).
    Konno, Daisuke
    Maekawa, Seiyo
    Wakigawa, Asahiro
    Nippon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B, 1984, 50 (459): : 2784 - 2789
  • [3] PREDICTION OF OUTLET FLOW CHARACTERISTICS OF CENTRIFUGAL IMPELLERS (1ST REPORT, CONSIDERATION OF VELOCITY DISTORTION).
    Kurokawa, Junichi
    Hode, Suguru
    Nippon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B, 1984, 50 (459): : 2777 - 2783
  • [4] EFFECT OF WAKE-TYPE NONUNIFORM INLET VELOCITY PROFILES ON 1ST APPRECIABLE STALL IN PLANE-WALL DIFFUSERS
    KAISER, KF
    MCDONALD, AT
    JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME, 1980, 102 (03): : 283 - 289
  • [5] Effects of seal geometry on rotordynamic fluid forces (1st Report, experimental results)
    Morimoto, Goh
    Nishida, Hiroki
    Yoshida, Yoshiki
    Tsujimoto, Yoshinobu
    Morii, Shigeki
    Nippon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B, 2002, 68 (670): : 1712 - 1719
  • [6] STUDY ON DAMPING CAPACITY OF A JOINTED CANTILEVER BEAM - (1ST REPORT - EXPERIMENTAL RESULTS)
    NISHIWAKI, N
    MASUKO, M
    ITO, Y
    OKUMURA, I
    BULLETIN OF THE JSME-JAPAN SOCIETY OF MECHANICAL ENGINEERS, 1978, 21 (153): : 524 - 531
  • [7] EXPERIMENTAL INVESTIGATION OF TRANSITION IN PLANE POISEUILLE FLOW (1ST REPORT, NEWTONIAN FLUIDS).
    Mizunuma, Hiroshi
    Kato, Hiroshi
    Nippon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B, 1987, 53 (488): : 1214 - 1223
  • [8] EXPERIMENTAL PROGRAM AND PERFORMANCE OF JAPANS COMMUNICATION SATELLITE (CS) AND ITS 1ST RESULTS
    TSUKAMOTO, K
    OTSU, Y
    KOSAKA, K
    SHIOMI, T
    SASAOKA, H
    IEEE TRANSACTIONS ON COMMUNICATIONS, 1979, 27 (10) : 1392 - 1405
  • [9] EXPERIMENTAL STUDY OF FLUID FORCES ON WHIRLING CENTRIFUGAL IMPELLER. (1ST REPORT, IMPELLER IN VANELESS DIFFUSER).
    Ohashi, Hideo
    Shoji, Hidenobu
    Kato, Chisachi
    Nippon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B, 1985, 51 (467): : 2373 - 2381
  • [10] Air flow in cylinder of 2 cycle uniflow scavenging diesel engine at compression stroke (1st report, experimental results)
    Nakagama, Hiroshi
    Tateishi, Mataji
    Nakashima, Masayoshi
    Kato, Satoshi
    Tsujimura, Harutaka
    Nippon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B, 1989, 55 (509): : 257 - 260