Fabrication of polystyrene microshells by dried-gel droplet method

被引：0
|
作者：
Wei, Y. [1 ]
Li, B. [1 ]
Lin, B. [1 ]
Chu, Q.M. [1 ]
You, D. [1 ]
机构：
[1] Natl. Key Lab. of Laser Fusion, Chinese Acad. of Eng. Phys., PO Box 919-987, Mianyang 621900, China
来源：
Qiangjiguang Yu Lizishu/High Power Laser and Particle Beams | 2000年 / 12卷 / 06期
关键词：
Fabrication - Gels - Inertial confinement fusion - Laser fusion;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The technological processes of polystyrene (PS) initial granules and the hollow microshells formed on a vertical drop furnace from the granules dealt with a foamer were investigated. The initial granules were produced by one step emulsion techniques. Influences of phase ratio and stirring intensity on the diameter distributions of initial granules were discussed, and alcohol was selected as a foamer according to the boiling point and solubility. Then the effects of temperature, gaseous compositions and pressures inside the furnace on the quality of PS microshells fabricated from the granules were tested. As a result, optimal conditions were selected to make PS microshells with outer diameters of 400-900 μm , wall thickness of 2-10 μm and concentricity better than 95%.
引用
收藏
页码：711 / 714
相关论文
共 50 条
  • [41] Fabrication of Micro-Optic Elements by the Sol-Gel Method
    Katsuhide Shinmou
    Kenichi Nakama
    Tadashi Koyama
    Journal of Sol-Gel Science and Technology, 2000, 19 : 267 - 269
  • [42] Fast transient fluorescence method for measuring swelling and drying activation energies of a polystyrene gel
    Erdogan, M
    Pekcan, Ö
    POLYMER, 2004, 45 (08) : 2551 - 2558
  • [43] Design and evaluation of a micro resonator structure as a biosensor for droplet analysis with a standard fabrication method
    Eidi, Amin
    Shamsi, Mousa
    Ghavifekr, Habib Badri
    SENSOR REVIEW, 2022, 42 (02) : 263 - 273
  • [44] Fabrication of oxygen-releasing dextran microgels by droplet-based microfluidic method
    Tomioka, Daisuke
    Jung, Shannon Anna
    Pich, Andrij
    Matsusaki, Michiya
    RSC ADVANCES, 2024, 14 (36) : 26544 - 26555
  • [45] Fabrication of ordered films of polystyrene–gold composites by a new flow-controlled method
    Simona Badilescu
    Nader Seirafianpour
    Ahmad-Reza Hajiaboli
    Yahia Djaoued
    Mojtaba Kahrizi
    P. V. Ashrit
    Vo-Van Truong
    Journal of Materials Science: Materials in Electronics, 2007, 18 : 383 - 387
  • [46] Comparison of Sonochemistry method and Sol-Gel method for the fabrication of TiO2 powder
    Choi, Jinhyuk
    Cho, Sung Hun
    Kim, Tae Ho
    Lee, Soo Wohn
    ECO-MATERIALS PROCESSING AND DESIGN XII, 2011, 695 : 109 - +
  • [47] Synthesis of polystyrene/silica hybrid composites by the sol–gel method: effect of introduction of a flexible component (butyl acrylate) into the silylated polystyrene backbone
    Tapasi Kotoky
    S. K Dolui
    Colloid and Polymer Science, 2006, 284 : 1163 - 1169
  • [48] Stable and ultrasensitive analysis of organic pollutants and heavy metals by dried droplet method with superhydrophobic-induced enrichment
    Liu, Yuanchao
    Pan, Jie
    Zhang, Guobin
    Li, Zebiao
    Hu, Zhenlin
    Chu, Yanwu
    Guo, Lianbo
    Lau, Condon
    ANALYTICA CHIMICA ACTA, 2021, 1151
  • [49] Fabrication of One-Dimensional Photonic Crystals by Sol-Gel Method
    Ilinykh, V. A.
    Matyushkin, L. B.
    PROCEEDINGS OF THE 2016 IEEE NORTH WEST RUSSIA SECTION YOUNG RESEARCHERS IN ELECTRICAL AND ELECTRONIC ENGINEERING CONFERENCE (ELCONRUSNW), 2016, : 47 - 50
  • [50] Fabrication of Transparent Yttria Ceramics through Gel-freezing Dry Method
    Huang Yi-Hua
    Jiang Dong-Liang
    Zhang Jing-Xian
    Lin Qing-Ling
    JOURNAL OF INORGANIC MATERIALS, 2008, 23 (06) : 1135 - 1140
12345